A clever way that will help eliminate fogging of the bathroom mirror. Everyone faced the problem of misted mirrors in the bathroom after they finished water procedures. The vapor that settles on the surface collects in the form of droplets and begins to flow down, and because of this it becomes very difficult to see its reflection.
What should I do to keep the mirror from fogging up? Fogging bathroom mirrors is the most common occurrence and can be solved in a variety of ways. For example, the most effective will be to install a shower cabin, or you can equip an additional ventilation system.
Ventilation in the room for water procedures
Ventilation in the bathroom will make it possible not just pull out the heated air, but also lower its temperature, lower the humidity level, and this will help reduce the formation of condensation and steam inside the bathroom. The fact is that "native" hoods often do not fully help to cope with the task, and then, to enhance ventilation in the hood, you can install an additional fan, which will be connected to the electrical network. Such forced ventilation is convenient in that it can be turned on only as needed.
Please note, that in addition to enhancing general ventilation, you can solve the problem with condensation in another way, namely, install a system for blowing the mirror, or, to put it simply , a small fan beside him.
Shower and steam isolation
Installing a shower stall will make it possible not only to save great space inside the bathroom, but also to solve the problem of condensation formation once and for all.
Doors in the shower stall will prevent splashing water and also prevent steam from spreading throughout the room.
Effective prevention - heating the mirror surface
The essence of this method is as follows - adjust the temperature of the mirror surface , as the same or similar temperature in the room and in the mirror will help prevent condensation of steam. so that the surface of the mirror does not start to fog up, a special device was created to heat it, called an anti-fogging device. It is a wire, the length of which is approximately 50 cm, and in which there are special heating threads - the device should be fixed on the back surface of the mirror, and then connected to the electrical network. Such an anti-fogging agent consumes very little electrical energy.
How can you perform processing from folk remedies
How to process a bathroom mirror from fogging up? Folk remedies for anti-fogging mirrors differ in that they are very simple, they require a minimum of costs to prepare them, and there will be many different and effective ways in your arsenal.
How to wipe the surface with shampoo
For a mirror that is small in size (about 0.5 * 0.7 meters) is usually enough and 1/2 tsp. shampoo.
First you should wash well, and then wipe the mirror dry so that there are no streaks. Next, apply a few drops of shampoo to a dry and clean cloth, and the same amount on the surface to be treated. Rub the detergent with a clean cloth or rag and do this until the soap streaks are completely gone. A protective layer from your shampoo will help keep the mirror from fogging in the future. Usually, the effect of such a procedure lasts up to two weeks, and then you can repeat the treatment again.
Use of laundry soap will be no less effective way. To use this method, wash the mirror with a special window and mirror cleaner. Next, you should evenly rub the surface of the mirror with laundry soap, and then, using a clean napkin (preferably suede), wipe the glass dry. Such a procedure will help create a protective film on the surface of the mirror, which will prevent steam from settling.
Toothpaste will also become a wonderful tool in the fight against fogging mirrors.
To do this, apply it on a sponge (cotton pad), and then wipe the surface and rinse with clean water. This method will help prevent the formation of condensation and, as a bonus, it will perfectly cope with any dirt.
Similarly, as in the method with shampoo and laundry soap, you can use shaving foam or cream - it will it is enough to apply the product on the mirror surface, and then, without rinsing, wipe everything dry with a towel or paper napkin.
Another simple and effective way to prevent condensation from settling on the mirror is vinegar. It can be used in two ways.
l. Vinegar and 100 ml of water, and then soak a napkin in the resulting solution and wipe the mirror.
Both methods are effective, choose the one that is more convenient for you.
This method will make it possible to forget about condensation for 2-3 weeks. To do this, mix 1 tsp.
gelatin and 50 ml of water. This solution should be used to wipe a dry and clean mirror. Gelatin, due to its unique structure, will create a protective film.
Purchase regular glycerin from the pharmacy to perform the treatment.It is easy to use - it will be enough to evenly distribute the product on the mirror surface.
Moreover, it is recommended to add glycerin to the water every time the mirror is washed.
Anti-fogging agent for car windows
Anti-fogging agent for automobile windows is ideal for treating mirror surfaces in the bathroom, as well as in the first, and in the second case, the principle of steam formation will be similar. The special agent will form a protective thin layer on the surface, and vapor drops will simply flow down through it.
Important! Please note that the anti-fogging agent should only be used according to the instructions - apply to the glass / mirror surface, and then wipe it dry and to a perfect shine with a cotton cloth. The effect of the product will last for about 1 week.
Even if the extractor hood works well in your apartment, and in particular in the bathroom, the bathroom should be aired from time to time, since the humidity level is always too high in this place.
Ventilation will give an opportunity not only to get rid of steam settling, but also for other common problems in the bathroom:
It will be enough just to leave the door to the room open for at least 2 hours every day.
Many people who are trying to keep their glasses and mirrors clean prefer to use proven methods, namely household chemicals. To prevent fogging of the bathroom mirror from becoming a problem of constant stains, you should rub the mirror well. In any store there is a huge selection of detergents that will make it possible to cope with very difficult dirt and at the same time will not leave any streaks. It is important that the composition is checked.
It is recommended to give preference only to those products that contain alcohol, but not ammonia. It is believed that it is easier to deal with divorces this way and the effect lasts longer.
However, not all the products that are on the counter of the store are as effective as their advertising suggests. Moreover, such funds are expensive, and in this case it is better to use the methods of our grandmothers. But first, let's take a look at how to clean your mirror well before applying an anti-fog solution to it.
Then wipe the surface dry.
Then clean the surface with newspaper and you can apply one of the anti-fog agents above.
Now let's look at ways to deal with divorce.
After that, there will be no stains on the mirror.
With the bow, you will be able to achieve the required smoothness and shine.
e. dust will not stick to the mirror.
By following all the guidelines, you will be able to keep the mirrors in your bathroom perfectly clean, and besides, they will not fog up. The best option is to use folk remedies, as it is inexpensive, simple and safe!
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |11, Nov 2020