How to get rid of grass on garden paths for a long time with your own hands. Most often, garden paths for summer cottages are made of various paving slabs, paving stones, clinker bricks or other materials that are similar in composition. But everywhere and always after the paving of the slabs, seams remain, which in the future should be covered with at least sand, and preferably with a cement composition. After a while, the first shoots of weeds begin to appear on such seams, which spoil the beautiful appearance of the track, and also reduce all the beauty of the pattern. In certain cases, grass that has grown in the joints between the tiles can even contribute to unsafe movement.
For this reason, all summer residents, without exception, are trying to get rid of this scourge, and use different methods for this.
If you do not remove the first shoots of grass that has grown between the tiles, in the joints, then its root system will be able to lift or even move the tiles. The weed seeds fall into the gaps between the tiles, which are ideal places for the grass to grow. For the first time, they will be provided with moisture, shade, protected from insects and even birds. The vast majority of track owners are carefully trying to control weeds, so they try to pull them out by the roots, the plants continue to grow.
How to get rid of grass on garden paths? We will talk about this further.
There are many different ways you can deal with grass that has begun to sprout in the joints between the tiles of the garden path ... In most cases, private house owners simply weed the grass by hand, or do it with garden tools.
This method is the simplest, but far from the most effective. To prevent the growth of weeds in the joints between the tiles, the fight against them should be started even when laying the tiles. There are several methods for this, which have already been tested by tens of thousands of summer residents and were satisfied.
So, when laying a stone path or paving stones, geotextiles are usually lined at the very bottom of the trench. Next, a layer of gravel, sand and gravel is laid on it.
A pillow prepared in this way must be tamped tightly and only after that you can begin to lay out the path itself in the garden. If you adhere to this technology, the problems with the grass will disappear by themselves, in principle they will not exist, since the service life of such a canvas will be more than 20 years.
A polyethylene film will perform approximately the same function as geotextiles. To do this, put a film folded in 2 layers at the bottom of the trench under the path in the garden, and only after that you can start filling the rest of the pillow components.Polyethylene film does its job quite well, but its service life is not as long as that of geotextiles.
Use of roofing felts or roofing felt
In terms of its composition, roofing material is a fairly dense paper, which was previously impregnated with bitumen or tar. After such impregnation, the material will not be threatened by moisture and decay. Roofing material is able to play the role of a barrier and last for several years. But before you lay the roofing material on the bottom of the trench under the track, you should achieve a dense and perfectly flat surface so that the material does not start to tear in the future.
Newspaper and cardboard
You can get rid of the grass on the paths in another way, quite interesting.
Most summer residents, when creating a path in the garden with their own hands, used the most ordinary cardboard or old newspapers as a substrate. Such materials will not disturb the environmentally friendly soil composition, but they are completely short-lived. The easiest and most inexpensive way is to use a wet newspaper as a barrier; with old issues, lay out the entire bottom of the trench in several layers. Such material is very affordable, so its use is very common.
To extend the service life of the track, summer residents began to do the following: they lay a brick or tile on a concrete base.
A similar method will be an excellent find for those who have swampy ground on the site or you want to make a site for your own car. This design looks like a monolith, so no weed will break through the concrete "wall".
To avoid having to bend over and pull up weeds in the seams of a walkway tile, there is a great opportunity to use a chemical method to get rid of grass. At the moment, in stores that specialize in selling goods for the garden and vegetable garden, there are many chemicals that have been created to combat weeds. The most potent chemical is Roundup.
But if you work with this substance, then you should definitely adhere to all precautions - carry out all work only with rubber gloves. The drug is extremely aggressive and capable of killing all living things.
Lontrel is a selective weed control agent. Its action is mainly aimed at combating sow thistle, plantain or dandelion. The drug should be used once a year, at a time when weeds are just beginning to appear.
If your path in the garden is in a rather neglected state, then herbicides should be used, which have proven themselves excellent, since it effectively fights weeds. The use of salt, vinegar or other chemicals is undesirable, as it can harm the soil, the environment, and beneficial plants in the garden or vegetable garden.All chemistry does not go to the garden for nothing, and after rain, certain components can even get on cultural plantings, harm them or even destroy them. Certain drugs of a chemical type of action can even have a negative effect on the material of the track, since there are aggressive solutions in the composition.
It is only possible to start processing the coating in dry weather.
This will allow the drug to take effect before the rainwater rinses away. But keep in mind that before using any chemicals, you should do a small test on a small area so that you can determine how the material affects the track. Modern chemical-based preparations are able to penetrate deep into the gaps between tiles, and are also aimed at destroying the root system of weeds. Only when you remove the root can you get rid of the weed once and for all, and prevent its growth and development, and this will preserve the decent appearance and integrity of the garden cover.
Slag flour for laying paths and spilling seams
Many of the summer residents during the construction of garden paths use the role of adding slag flour.
It is a material that can be obtained by screening out limestone, granite, and slag. The thickness of each grain will be 0.5 mm. Such material has a low level of radiation, therefore it is considered safe even for small children. The flour is also used to fill the joints between the tiles.
After you process the seams with flour, the surface should be washed with an ox. The material will begin to set, harden and the weeds will not even be able to grab onto the ground space. When laying colored tiles, test the material on a small section of the path first.
Please note, that in order to get rid of the grass on the paths, many summer residents, if they do not have cement mortar available, use cement mortar to seal the joints between the tiles. This method also makes it possible to get rid of the growth of grass in the gaps.
Washing with water
In order to effectively get rid of weeds that grow in the joints between the tiles on the path, you can use a high pressure water pump or special car washes that are used to wash cars. Most people clean rugs and carpets this way. You can use some other tools that you can use to cover the sidewalks. After such treatment, weed seeds that are still left in the seams between the tiles will begin to wash out, and you can protect yourself from their shoots.
Using folk methods
Not all summer residents use such methods, but many are ready to go to any lengths to get rid of weeds.
For example, pour alcohol over everything. It should be diluted in a ratio of 1 measure of alcohol and 10 measures of water, heat everything and pour directly onto the hotplate.But this method is quite expensive, it will not be affordable for everyone, so we will consider a few more. You can water the weeds in the seams with boiling water, and this method is quite effective, but it can destroy the bedding between the tiles and not give the desired result.
Many gardeners like this have tried the salt and vinegar method to get rid of the grass between the slabs of the garden path.
This requires 1 tbsp. l. Dissolve soda in a bucket of water, and then add 500 ml of vinegar. For more effect, add a few drops of dish detergent. Next, mix the composition and pour it directly onto the lane, but you can also use a regular spray.
Gloves and a respirator must be used when treating weeds in this manner. Carry out the processing in the evening, since in this case the smell of vinegar will have time to disappear overnight and after 24 hours the grass will dry out. Then get rid of it with a regular broom.
If you have not been at the dacha for a long time, then everything could have grown with weeds, and in this case the easiest way to do this is to pull out the thickets together with the root, and then thoroughly clean all the gaps between the tiles and for in order to prevent germination of seeds from old grass in the future, treat the path with a special solution. To do this, dilute 4 kg of lime (quicklime) in 50 liters of water, and then add 500 ml of sulfuric acid.
Bring the solution to a boil, cool, and then carefully process all the paths in the garden. This method has been used for many years, since it is really capable of destroying grass for a long time. The most important thing is not to use a similar solution for spraying the beds, as there is a high probability that you will completely destroy the fruiting crop.
Please note, that if you do not plan to come to the dacha in the near future, then to protect the paths in the garden from weeds, you should cover them with a thick layer of newspaper, wrapping paper or dark cardboard colors. Be sure to fix such a covering, for this we lay bricks, stones or any other heavy objects on top.
So you can deprive the seeds of weeds for their growth, and if sprouts began to appear in the seams, then after a couple of days they themselves will die. When you remove the covering material, thoroughly clean the seams, and for greater confidence, treat everything with chemicals of chemical origin.
Removing grass by mechanical method
The easiest way to mechanically remove grass from tile paths is to remove it with ordinary sand ...
To begin with, remove the weight of debris from the path, as well as fallen leaves. Next, you should prepare a soap solution made on the basis of laundry soap. Detergents and washing powders will not work. The sand must be poured onto the surface of the path, dip the broom in a soapy solution, and then, without brushing it off, start sweeping the path.The sand will act as an abrasive so you can sweep away moss, grass and mold in parallel.
Good advice! You can use special scrapers to clean the tile joints. They come in a variety of sizes and configurations, and you can choose from any store that has gardening supplies to choose from.
Removing rooted weeds with an L-shaped garden knife
You can find a crevice cleaner in hardware stores that sell various tools for your garden and garden. This is an L-shaped garden knife that is designed to remove weeds from the joints between tiles. It costs quite a bit, but judging by the many reviews it does an excellent job with the main function.
You can even find a similar tool in online stores if you enter "knife-hook for grass removal" in the search bar. On the Aliexpress website, it costs a little over a hundred rubles, but delivery will take about a month, so if you need such a tool, order it in advance.
If you properly care for your tiled paths in the garden, you can avoid the appearance of grass among cracks or seams. The most convenient place for weeds to grow is exactly the tile that is damaged. As a rule, many weeds have a powerful root system that sometimes even destroys a path made of any material.
But, for example, paving stones, which are made by pressing, are the most reliable material, better than any tile. It is practically not subject to destruction, its service life is quite long, especially with proper care. During the winter period, it is advisable that you use wooden or plastic shovels to clear snow from the paths. The use of shovel iron shovels is unacceptable, as you can easily damage the layer of material.
Such damage will contribute to further destruction of the tile, and this will create all the conditions for the weed to grow, and it will become more and more.
In the summer, you should try to regularly sweep the paths with a regular broom or a not too hard brush. Garden paths should not be overloaded, as this can cause subsidence of the soil, and chemical preparations with aggressive effects should not be used, as your tiles may crumble and deform. Paving or tile paths are allowed to be painted, as this will be an additional layer in order to preserve the integrity of the coating.
This article has just covered some of the ways to deal with grass on garden paths, and you know how to deal with weeds, as well as how to prevent them from reappearing. The process will not take long, and it will not take much effort.
It is enough that you will periodically carry out cleaning activities.
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |01, Nov 2020
Posted By: Work Style |12, Nov 2020