characteristics and price - where to buy and what is the consumption per 1 m2 + Video

characteristics and price - where to buy and what is the consumption per 1 m2 + Video The article describes the ready-to-use putty of the Shitrok brand. The versions of the finished product produced by the manufacturer are described.

The characteristics of different product lines are given, how to use it independently in the production of housing repairs, storage conditions.

A step-by-step instruction on the basics of using the material yourself is given.

[content ]

Shitrok putty General

The Shitrock brand is developed in the United States of America.

It is a putty for finishing walls and ceilings indoors. Shitrok putty is also produced in Russia.

Form of issue

characteristics and price - where to buy and what is the consumption per 1 m2 + Video

Liquid mixture

Ready-to-use liquid mixture with a consistency similar to a creamy mass. Packaged in plastic buckets of various sizes

Dry mixes

Putty is prepared directly on site in the required volume by adding water from previously mixed dry components in the required proportions.

Shelf life

The term does not depend on the form of issue.

The putty can be kept indoors at low temperatures. In case of detachment of the liquid component from the base, it is enough to stir the product before use.

The composition of the putty

  • natural lime material dolmit . It imparts its characteristic firmness to the product after drying. Facilitates finishing with an abrasive tool.

    Gives the basic shade of the mixture.

  • The base is polymer vinyl . He is responsible for the elasticity and long shelf life of the finished product.
  • Talc or pyrophyllite
  • Attapulgite is a catalyst
  • Latex is added to a certain line of putties for more fine work when sealing small flaws. Such material is characterized by increased strength and elasticity.

  • Water

What works do you need a shitrock product for?

Important! Before using or preparing a mixture, you must carefully read the instructions. Be sure to use personal protective equipment; respirator, robe, glasses, cotton gloves with PVC coating.

  • characteristics and price - where to buy and what is the consumption per 1 m2 + Video Finishing surfaces of walls and ceilings. The base can be cement and gypsum plasters, wooden surfaces, stone, gypsum plasterboards.
  • Finishing inside and outside corners using metal and plastic corners.

  • Sealing cracks during repair work
  • Sealing joints between gypsum boards.
  • Slope trim .
  • Decorative surface finish.
  • Bonding GKL and GVL to each other

Classify putties according to the objects of application

  • SuperFinish are used for simple finishing
  • Fill. Finish Light is used on gypsum block walls and plasterboard surfaces.

  • For hardware application, putty is taken with the addition of ProSpray in the name.

Application of putty

It is not difficult to work with such material. With certain initial skills, the finishing process will not be difficult for a beginner.

Material tool

  • characteristics and price - where to buy and what is the consumption per 1 m2 + Video Steel Spatulas in widths from 100mm to 300mm.
  • Flutes brush up to 100mm.

  • Foam sponge.
  • Abrasive mesh on a stone.
  • Electric paint sprayer.

During the application period, the putty has won a leading place among the materials of this class.

The mixture is applied to the surface by hand with spatulas and using special equipment.

The thickness of the layer determines the drying time of the product.

Step-by-step instruction

  • Coating with finishing putty is performed on specially prepared surfaces after plastering or grinding.
  • The entire surface is dust free with adhesive primer .
  • The base material must be dry, free from cracks and deep irregularities.
  • A special tape must be glued to the seams under the putty.

  • Nails and screws are recessed flush with the surface.
  • Metal or plastic attachments are mounted on the outer corners.
  • The topcoat is applied in several layers.
  • With a narrow spatula, the material is transferred in small portions to a wide tool, and then a thin layer is stretched over the surface of the wall or ceiling.
  • Then allow time for the applied layer to dry.

  • Each subsequent layer repeats the technology.
  • It is advisable to grind each new layer.

Important: it is easier to control the surface quality by using a powerful light source, which is located on the wall opposite to the specialist.

The shadow of even a slight unevenness will show the exact location of the problem area. It is enough to use a luminaire with a fluorescent lamp.

It is allowed to apply no more than 4 layers of finishing putty on the treated area.

11 reasons to choose Shitrok putty

  1. Ready form for use. All components and consistency are selected in the required proportion.
  2. characteristics and price - where to buy and what is the consumption per 1 m2 + Video Saving time and no risk of mistakes when self-cooking
  3. Even a beginner can work with the product.
  4. The elasticity of the output material assumes no shrinkage or cracking.

  5. The material is moisture resistant during operation.
  6. Withstands low temperatures in liquid form and after application on site.
  7. Unlimited storage time.
  8. Long service life.
  9. Simple tools are used to work with it.

  10. Quality, economy and result of the application offset the cost.
  11. Reasonable price.

Where to buy Shitrok putty?


characteristics and price - where to buy and what is the consumption per 1 m2 + Video
Conclusion
When evaluating Shitrok putty, it becomes clear that all technical characteristics bear a positive result in solving many issues of housing repair. The price of the material corresponds to the quality.

Sheetrock putty gives minimal shrinkage when completely dry.

This reduces material and financial costs.

For 1 m 2 area, 1 kg of the finished product is consumed. Savings are also noticeable when sealing joints and decorating, 600 gr. by 1 p / m. and 1.

4 kg. at 1m 2 respectively.

.

Facade foam: use for insulation and decoration
Facade foam: use for insulation and decoration

Posted By: Work Style |02, Nov 2020

Facade primer - the best manufacturers + instructions
Facade primer - the best manufacturers + instructions

Posted By: Work Style |04, Nov 2020

8 things you can clean once a year + Photos and Videos
8 things you can clean once a year + Photos and Videos

Posted By: Work Style |13, Nov 2020

Free software for architectural design
Free software for architectural design

Posted By: Work Style |09, Nov 2020