Combined chalet-style houses projects, construction technology step by step

Mountain romance, simplicity and elusive, special beauty lie in the houses built in the chalet style. They are not called combined for nothing, because they are built simultaneously from wood and stone. Thanks to this, such buildings acquire unique properties. Chalet-style combination houses, with a wide variety of designs, have long attracted the attention of architects. And, it should be noted, deservedly so.

It's time to get to know them better.

Combined chalet-style houses projects, construction technology step by step

Chalet style combination houses projects

Combined chalet-style houses projects, construction technology step by step

Chalet style house photos

Style features

Chalet-style houses "descended" to us from the Alpine mountains. The name of the style is the name of a small rural house, the dwelling of shepherds who grazed cattle in the mountains and built houses from what was at hand. Most often these are ordinary stones and mountain pine, which grows in abundance in those areas. The lower part of the structure was erected from stone, due to which it acquired excellent strength, resisting not only snow and wind, but even mountain avalanches.

In the basement part of the building, livestock found shelter - young animals and weakened animals. The upper part of the building was made of wood, and the roof was always sloping, which made it streamlined for the wind. And this, you see, is very important in windy mountainous areas. In short, it was very good to hide in such houses during the raging elements. Ordinary lime was used as a facade decoration.

Combined chalet-style houses projects, construction technology step by step

Typical chalets in Switzerland

Note! The birthplace of chalet houses is the southeastern region of France, Savoy. Interestingly, houses built in this style are also called "Swiss houses". The reason is that the homeland of the chalet bordered on Italy and Switzerland, which gave the buildings their names. In general, it would be more correct to call houses in this style "Alpine", since the birthplace of such buildings is the very heart of the Alps.

Combined chalet-style houses projects, construction technology step by step

Outdoor recreation area

Over time, chalets from ordinary and unremarkable shepherd's huts turned into real residential buildings .

.. The shepherds cared more and more about comfort and life, they not only took refuge in such buildings from bad weather, but also came here to rest.

Combined chalet-style houses projects, construction technology step by step

The chalet was originally a small house in the Alpine style

Interesting! Translated Chalet just means "shepherd's hut". And also related words are –°hale, which means "shawl", and Chaleur, which means "warmth".

On the territory of Russia, they also liked to build combined houses. Around the middle of the 19th century, merchants built just such structures in order to save money.

Combined chalet-style houses projects, construction technology step by step

Chalet-style house

Thus, a chalet is not only reliable, but also a cozy and comfortable home, although looking somewhat spartan in its traditional guise. Although now the chalets can be quite exquisite and resemble the most real mansions.Such houses are popular among romantic natures, they are often found in rural areas, but look especially harmonious in open spaces or mountain slopes.

Combined chalet-style houses projects, construction technology step by step

Chalet house project

Architecture and general appearance

Despite that many years have passed, chalet houses have not fundamentally changed, except that they have become cozier, more comfortable, inside they have a beautiful interior and all the necessary equipment, and outside there is an extension-garage, a more beautiful and modern facade.

Combined chalet-style houses projects, construction technology step by step

Facade of a chalet-style house

Chalets still remain combined houses - stone lower floor, wooden upper, sloping roof, hanging widely over the walls of the house, which allows it not only to resist the wind, but also to protect the wooden facade of the building from rain and other environmental factors. Sometimes the roof removal was equal to 3 m - such a structure could protect even the basement from the weather.

Combined chalet-style houses projects, construction technology step by step

The design of a chalet-style house is organically inscribed in the surrounding landscape

Thanks to such excellent protection, the wooden part of the house did not get damp, it the fungus did not start, other parasites did not settle. And in the summer heat, the overhangs of the roof provided shading for the house.

By the way, the sloping roof of the chalet has a very slight slope, and in winter a layer of snow accumulates on it, providing additional thermal insulation, which is especially important, since the attic floor in such buildings is usually residential. But this has its drawback - you have to additionally strengthen the rafter system so that the roof does not collapse under all the weight.

Important! Wide terraces and balconies, which are installed on piles and covered with eaves, have become a kind of chalet's business card. And on the ground floor, large windows are usually made, which allows you to enjoy the surrounding nature without leaving your home.

Combined chalet-style houses projects, construction technology step by step

Chalet-style interior

The main features of chalet houses are the naturalness of the materials used, naturalness, harmony with the surrounding world .

..

Advantages of chalet houses

In Europe, and especially in Germany, Norway, Denmark, chalets are found quite often, and there is a justification for this. The problem is the lack of wood - there is not much of it here. A wooden second floor allows you to significantly save money when building a house.

But this is not the only reason why Europeans love such buildings. Chalet-style houses have many advantages.

Combined chalet-style houses projects, construction technology step by step

Combined brick house + glued laminated timber

Table. Advantages of chalet-style houses.

Name Brief description
Efficiency Houses made of stone alone are not cheap.

And here there is a combination of stone and wood, which makes construction cheaper.

Original appearance Such houses are usually built by enthusiastic, romantic or willing to show their individuality.
Environmental safety Since houses are built only from natural materials, they do not cause any harm to either human health or the environment.
Increase in fire resistance Indeed, in the event of a fire, only the upper part of the dwelling will burn. And it is easier to get a permit for the installation of heating boilers.


Durability The tree, as you know, is prone to decay over time, even when treated with special preparations. In chalet houses, the ground floor is stone, which is not afraid of these processes. When building a combined chalet, you can even refuse to build a complex expensive foundation, since the upper part of the structure is quite light
High energy efficiency Wood is better than stone, retains heat, which means that the owner will be able to save some of the money on heating.
Space for designer fantasies Chalet houses are a structure where you can walk around and arrange it in a rather unusual way, both externally and internally. But still, the emphasis needs to be placed on the inside of the house.

The first floor can include a dining room, a garage, a swimming pool, and the second floor is an abode of coziness and comfort, ideal for an office, bedroom.

Materials used

As mentioned earlier, the main materials used to build a chalet house are it is wood and stone. No plastic or metal. The basement, depending on the wishes of the owner, can be made of various "stone" materials - bricks, aerated concrete, foam concrete are used. In case the choice was made in favor of brick, the first floor must be additionally insulated according to the principle of a ventilated facade.

That is, the main brickwork will be lined with an insulating layer from the outside, and decorative external finishing will already be arranged along it.

Combined chalet-style houses projects, construction technology step by step

Combined house 225 sq. m

Advice! In the case of using aerated concrete or foam concrete for the construction of the first floor, there is no need for additional insulation. That is why it is now recommended to abandon bricks in favor of these materials. In addition, they are much lighter, which makes it possible to further reduce the cost and simplify the arrangement of the foundation.

The second floor can also be built from various materials.

  1. For example, from non-planed logs. Such a wall must be insulated according to the principle of a ventilated facade. The result is a fairly solid second floor.
  2. The upper part can also be constructed of rounded logs.

    This option is not suitable for the construction of a traditional chalet, but will allow you to combine an original Russian house with an alpine structure.

  3. A house made of profiled timber will allow you to enjoy the even and neat rows of ends and cuts. This also has its own beauty.

    Combined chalet-style houses projects, construction technology step by step

    Profiled timber

  4. The best option is glued laminated timber about 20 cm thick.It is not only beautiful, but also protected from cracking , shrinkage, drying out.

    However, such material is expensive.

  5. Frame technology is the cheapest way to build the second floor of a chalet. It will minimize the weight of the building.

Combined chalet-style houses projects, construction technology step by step

Pearl Ski Chalet in Courchevel

By tradition, wood shingles (shingles) are used as roofing material. It can be made of cedar, oak, aspen, and fastened with dowel nails or galvanized staples.

Such a roof absorbs noise very well and does not make noise during rain. Of modern materials, soft shingles are commonly used for roofing roofs today. It looks no worse than a natural shingle.

Note! By the way, chalet houses can be decorated in the same style, that is, both the upper and lower floors will look the same. For example, they can be finished with decorative plaster, siding, imitation timber.

But in this case, the chalets will lose all their style and charm, so it is better not to decorate both floors with the same material.

Combined chalet-style houses projects, construction technology step by step

Park-chalet "BENELUX"

Also, any other building can be artificially turned into a chalet house. For this, a two-story building is sheathed from below with decorative or wild stone, from above - with a material imitating wood. Externally, such a house will be very similar to a traditional chalet, although inside it may be a structure made entirely of brick or wood.

Combined chalet-style houses projects, construction technology step by step House in the German style

Architectural styles inherent in Western countries are now very popular among domestic developers.

In elite Russian villages, you can increasingly see houses stylized as French Provence, English classics, luxurious Baroque or ultra-fashionable high-tech. But ordinary homeowners are especially fond of the German style.

We build a chalet house with our own hands

A chalet house project can be done independently, or you can hire specialists for this. But in the second case, you will have to spend a certain amount. If you have the desire and time, then you can design a chalet house, and then build it yourself.

We offer you to get acquainted with the technology of building a chalet house, shown below.

Combined chalet-style houses projects, construction technology step by step

Chalet-style house project - facade option

Combined chalet-style houses projects, construction technology step by step

Another option facade

Combined chalet-style houses projects, construction technology step by step

Reverse, so to speak, side

Stage 1. Design

The first floor will be built from 40 cm thick aerated concrete, and the second from profiled timber. Outside, the second floor will be insulated with mineral wool and sheathed with imitation timber.

Step 1.

A house project is being created: detailed study of the dimensions of the rooms, the appearance of the building. According to the project, the house turned out to be 12x12 m in size, and its living area was 240 m 2 .

Combined chalet-style houses projects, construction technology step by step

First floor project

Combined chalet-style houses projects, construction technology step by step

Second floor project

Step 2. The layout of aerated concrete blocks is immediately drawn in the project - this will facilitate the calculation of their number.

Combined chalet-style houses projects, construction technology step by step

Layout scheme for the first floor blocks

Combined chalet-style houses projects, construction technology step by step

Opposite wall layout

Combined chalet-style houses projects, construction technology step by step

Layout scheme for an extension to the house

Stage 2.

Foundation and communications

Step 1. The place where the foundation pit will be prepared is cleared of grass.

Combined chalet-style houses projects, construction technology step by step

A chalet-style house will stand here

Combined chalet-style houses projects, construction technology step by step

Clearing the selected area

Step 2. The marking for digging a foundation pit in the part where the house will be built is made according to the plot layout.

Combined chalet-style houses projects, construction technology step by step

Marking for digging a pit

Combined chalet-style houses projects, construction technology step by step

Stakes and rope are used for marking

Combined chalet-style houses projects, construction technology step by step

Another photo of the process

Combined chalet-style houses projects, construction technology step by step

Pit

Combined chalet-style houses projects, construction technology step by step

Layout of the site

Step 3.

The pit is being dug.

Combined chalet-style houses projects, construction technology step by step

You can start digging a pit

Combined chalet-style houses projects, construction technology step by step

It is more convenient to use special equipment for work

Combined chalet-style houses projects, construction technology step by step

Digging a pit for the foundation

Combined chalet-style houses projects, construction technology step by step

Another photo of this process

Combined chalet-style houses projects, construction technology step by step

The pit is almost ready

Step 4. In parallel with the preparation of the pit for the foundation, dug and trenches for communications.

Combined chalet-style houses projects, construction technology step by step

Digging trenches for communications

Step 5. Ready trenches are poured with sand (cushion for pipes), a well is being dug.

Combined chalet-style houses projects, construction technology step by step

Example of finished well

Combined chalet-style houses projects, construction technology step by step

The bottom of the trench is covered with sand

Step 6. Pipes are laid. Thermal insulation for them is made of 5 cm thick foam. The pipes are covered with sand, then with soil.

Combined chalet-style houses projects, construction technology step by step

Thermal insulation of pipes with penoplex

Combined chalet-style houses projects, construction technology step by step

Connecting the pipe to the well

Combined chalet-style houses projects, construction technology step by step

Piping process

Combined chalet-style houses projects, construction technology step by step

Piping

Step 7.

The pit is filled with sand, leveled, then covered with geotextiles.

Combined chalet-style houses projects, construction technology step by step

Leveling the sand layer

Combined chalet-style houses projects, construction technology step by step

Another photo of the process

Combined chalet-style houses projects, construction technology step by step

Laying geotextiles

Step 8. The pit is backfilled with sand, but this time - on top of the geotextile ...

A layer of 10 cm thick is leveled over the surface of the geotextile, rammed, spilled with water and rammed again. Such layers are needed 3. Reinforcement beacons are installed.

Combined chalet-style houses projects, construction technology step by step

Sand is re-filled

Combined chalet-style houses projects, construction technology step by step

The pit is backfilled with sand

Combined chalet-style houses projects, construction technology step by step

Almost done

Combined chalet-style houses projects, construction technology step by step

Sand needs to be leveled and compacted

Step 9. With a slope of 2 cm, a trench is dug under the sewer pipe.

The pipe is being laid. The trench is covered with sand and soil.

Combined chalet-style houses projects, construction technology step by step

Laying sewer pipes

Combined chalet-style houses projects, construction technology step by step

Another photo of the same process

Combined chalet-style houses projects, construction technology step by step

Backfilling pipes

Combined chalet-style houses projects, construction technology step by step

Sewer pipes backfilling

Step 10. Drain chambers are installed.

Combined chalet-style houses projects, construction technology step by step

Installation of wells

Step 11.

Along the contour of the foundation and slightly beyond it (30 cm) dumping with river gravel. The gravel is rammed.

Combined chalet-style houses projects, construction technology step by step

Filling with river gravel

Combined chalet-style houses projects, construction technology step by step

Gravel is poured along the perimeter of the foundation

Combined chalet-style houses projects, construction technology step by step

Gravel needs to be tamped

Step 12. Drainage trenches with a slope are dug 60 cm from future walls 1 cm from the walls. Geotextiles, crushed stone, a pipe, which is covered with crushed stone, are laid.

All this is covered with sand and rammed with water.

Combined chalet-style houses projects, construction technology step by step

Laying pipes in a drainage trench

Combined chalet-style houses projects, construction technology step by step

Drainage trench

Combined chalet-style houses projects, construction technology step by step

The same trench on the opposite side

Step 13. The formwork is assembled for pouring the foundation.

Combined chalet-style houses projects, construction technology step by step

Materials for assembling the formwork

Combined chalet-style houses projects, construction technology step by step

Assembling the formwork for pouring the foundation

Combined chalet-style houses projects, construction technology step by step

Formwork assembly

Combined chalet-style houses projects, construction technology step by step

Another photo of the process

Combined chalet-style houses projects, construction technology step by step

Assembling the formwork photo

Combined chalet-style houses projects, construction technology step by step

Reinforcement rods in the corners

Combined chalet-style houses projects, construction technology step by step

The formwork is almost ready

Step 14. In accordance with the scheme, expanded polystyrene is laid, fixed with glue.

Combined chalet-style houses projects, construction technology step by step

EPPS layout scheme

Combined chalet-style houses projects, construction technology step by step

Styrofoam laying

Combined chalet-style houses projects, construction technology step by step

Seams between the elements are blown out with polyurethane foam

Combined chalet-style houses projects, construction technology step by step

The process of laying expanded polystyrene

Combined chalet-style houses projects, construction technology step by step

Another photo of the laying process

Step 15. Reinforcement is being laid - foundation reinforcement.

Combined chalet-style houses projects, construction technology step by step

Foundation reinforcement scheme

Combined chalet-style houses projects, construction technology step by step

Reinforcement laying

Combined chalet-style houses projects, construction technology step by step

Foundation reinforcement

Combined chalet-style houses projects, construction technology step by step

The reinforcement is laid along the entire perimeter of the base

Step 16. Pipes for heating and water supply are being laid.

Combined chalet-style houses projects, construction technology step by step

Pipe bend reinforcement

Combined chalet-style houses projects, construction technology step by step

Piping

Combined chalet-style houses projects, construction technology step by step

Pipes laid

Step 17.

Heated floors are laid in accordance with the scheme. Step - 15 cm, 10 contours. They are attached to the fittings with plastic clamps.

Combined chalet-style houses projects, construction technology step by step

Underfloor heating installation scheme

Combined chalet-style houses projects, construction technology step by step

Underfloor heating installation

Combined chalet-style houses projects, construction technology step by step

Plastic clamps are used for fixing

Prices for heating cables and accessories

Heating cable and accessories

Step 18. The foundation is poured with concrete.

Combined chalet-style houses projects, construction technology step by step

Foundation pouring device

Combined chalet-style houses projects, construction technology step by step

In this case, a concrete mixer

Combined chalet-style houses projects, construction technology step by step

Pouring the foundation with concrete

Combined chalet-style houses projects, construction technology step by step

Leveling the mortar

Combined chalet-style houses projects, construction technology step by step

Foundation pouring process

Combined chalet-style houses projects, construction technology step by step

Another photo of the process

Combined chalet-style houses projects, construction technology step by step

The foundation is poured

Further work can be carried out when the concrete is dry (about 15-28 days).

Stage 3. Construction of walls

Step 1. Aerated concrete blocks are brought to the construction site, temporarily stored around the previously poured foundation. For external and load-bearing walls, blocks of 375x625x250 mm will be used, for internal, not experiencing heavy loads - 250x625x250 mm.

Floor slabs are also delivered to the site - 8 pcs. size 1200x5000 mm and 8 1200x6600 mm. Trowels, glue, a plane are purchased, which are useful for laying aerated concrete.

Combined chalet-style houses projects, construction technology step by step

Aerated concrete blocks delivered

Combined chalet-style houses projects, construction technology step by step

Unloading aerated concrete blocks

Combined chalet-style houses projects, construction technology step by step

Floor slabs are also in place

Combined chalet-style houses projects, construction technology step by step

Ready to go

Step 2. Waterproofing is laid on the concrete foundation under the first row of aerated concrete blocks.

Immediately, the construction of the perimeter of the house and internal walls is underway.

Prices for various types of aerated concrete blocks

Aerated concrete block

Combined chalet-style houses projects, construction technology step by step

Laying the first row of blocks

Combined chalet-style houses projects, construction technology step by step

It is necessary to maintain both the perimeter of the house and the internal walls

Combined chalet-style houses projects, construction technology step by step

Laying of aerated concrete blocks

Step 3. Then 3 and 9 rows of aerated concrete are reinforced - a strobe is made, where reinforcement is inserted, and then glue is poured.

Combined chalet-style houses projects, construction technology step by step

Subsequent rows are being laid

Combined chalet-style houses projects, construction technology step by step

The reinforcement is laid in the grooves

Combined chalet-style houses projects, construction technology step by step

Laying blocks over reinforcement

Step 4. Openings of windows and doors are formed.

U-blocks are laid above the window and door openings, and inside they have a frame of 4 connected reinforcing rods.

Combined chalet-style houses projects, construction technology step by step

Openings are formed

Combined chalet-style houses projects, construction technology step by step

Openings are formed

Combined chalet-style houses projects, construction technology step by step

Subsequent stacking of blocks

Combined chalet-style houses projects, construction technology step by step

Another photo of the process

Step 5. Reinforced lintels are installed above the door openings that will be inside the house.

Combined chalet-style houses projects, construction technology step by step

Internal doorways

Combined chalet-style houses projects, construction technology step by step

Jumper

Step 6. By the way, points 4 and 5 are the stages of forming the armored belt of the structure.

Further along the gables, a wall of extruded polystyrene foam will be installed, inside it will have a frame made of reinforcement, to which outlets of reinforcement for corners are welded. The latter will later hold the balcony. Armopoyas is poured with concrete.

Combined chalet-style houses projects, construction technology step by step

The process of creating an armored belt

Combined chalet-style houses projects, construction technology step by step

Solution preparation

Step 7. A crane is required to lay the floor slabs.

The slabs are laid close to each other on an armored belt, covered with cement and reinforcement.

Combined chalet-style houses projects, construction technology step by step

Crane for laying floor slabs

Combined chalet-style houses projects, construction technology step by step

Laying floor slabs

Combined chalet-style houses projects, construction technology step by step

The same process, inside view

Step 8. From metal corners about 7 mm thick and with dimensions 100x100x1500 mm, outlets for the balcony are formed. The structure is poured with concrete.

Combined chalet-style houses projects, construction technology step by step

Outlets for the balcony are formed from metal corners

Combined chalet-style houses projects, construction technology step by step

Outlets after pouring

Combined chalet-style houses projects, construction technology step by step

Cleaning of metal corners

Step 9.

The timber is laid on the waterproofing layer.

Combined chalet-style houses projects, construction technology step by step

Preparation of waterproofing

Combined chalet-style houses projects, construction technology step by step

Beam

Prices for various types of timber

Timber

Combined chalet-style houses projects, construction technology step by step

Laying timber

Combined chalet-style houses projects, construction technology step by step

The second floor of the chalet house is being formed

Combined chalet-style houses projects, construction technology step by step

Internal walls are being built

Combined chalet-style houses projects, construction technology step by step

Another photo of the process

Step 10. In the process of laying the timber, the gable of the roof is immediately formed. After assembling the wooden frame, the tree is treated with "Neomid" - an antiseptic preparation and bleach.

Combined chalet-style houses projects, construction technology step by step

Gable formation

Combined chalet-style houses projects, construction technology step by step

Gable on the opposite side

Combined chalet-style houses projects, construction technology step by step

The walls of the second floor are ready

Step 11.

The roof is being assembled. Since its angle is very small, the slopes will turn out to be quite long (the length of the rafters is 7.7 m, the dimensions of the rafter board are 200x50 mm). They may have to be increased. The distance between the rafters should be no more than 60 cm.

The dimensions of the board for the counter-lattice are 100x25 mm.

Combined chalet-style houses projects, construction technology step by step

Assembling the rafter system

Combined chalet-style houses projects, construction technology step by step

Junction

Combined chalet-style houses projects, construction technology step by step

Processing roof elements

Combined chalet-style houses projects, construction technology step by step

Long slopes

Step 12. Outlets of 1.5 and 2 m are formed. Releases are also made along the slopes - 1.

5 m each.

Combined chalet-style houses projects, construction technology step by step

The roof is sheathed

Step 13. The visible parts of the rafters and other parts of the roof are sanded and painted.

Combined chalet-style houses projects, construction technology step by step

All visible elements must be sanded and painted

Note! The procedure for assembling the roof is as follows: the rafters are installed, then the filing board is attached, then the crate and counter-lattice are mounted, waterproofing is performed, metal tiles are laid, insulation is hemmed and vapor barrier is made.

Step 14.

Mineral wool is laid from the inside of the house after installing the metal tile. The gap between the roof and the wall can be closed with scraps of rafters and timber.

Combined chalet-style houses projects, construction technology step by step

Laying mineral wool

Combined chalet-style houses projects, construction technology step by step

House is ready for wall decoration

Stage 4. Wall decoration inside and outside

Scaffolding prices

Scaffolding

Step 1. The walls are cleaned from the remains of cement and adhesive mortars.

Combined chalet-style houses projects, construction technology step by step

Cleaning the walls

Step 2. A plan of the electrical network of the house is drawn up. In accordance with the diagram, the walls are grooved under the wires.

Combined chalet-style houses projects, construction technology step by step

Next, you need to draw up a power plan

Combined chalet-style houses projects, construction technology step by step

Example of a power plan

Combined chalet-style houses projects, construction technology step by step

All necessary information is specified

Combined chalet-style houses projects, construction technology step by step

Wall strobing

Tip! It is convenient to apply the markings using a marking line.

Combined chalet-style houses projects, construction technology step by step

Marking cord

Step 3.

Sheathing with insulation (mineral wool) of the outer walls second floor. The thickness of the layer is 10 cm. To prevent cotton wool from falling out, it is attracted by a nylon twine. A waterproofing vapor-permeable layer is laid on top of the insulation.

Combined chalet-style houses projects, construction technology step by step

Sheathing scheme for laying insulation

Combined chalet-style houses projects, construction technology step by step

Laying mineral wool

Combined chalet-style houses projects, construction technology step by step

Waterproofing fixing

Step 4.

The walls from the inside of the house are washed, primed with a preparation of deep penetration in 2 layers , and then plaster with gypsum plaster.

Combined chalet-style houses projects, construction technology step by step

The walls are plastered

Step 5. The floors on the second floor are screed. The timber along the floor is treated with a waterproofing agent. A 5x5 cm mesh is laid, and then a 3.

5 cm layer of concrete is poured. If necessary, a floor heating system is installed.

Combined chalet-style houses projects, construction technology step by step

Second floor floor screed

Combined chalet-style houses projects, construction technology step by step

Underfloor heating installation

Attention! Do not forget about the formation of the hole for the chimney / boiler pipe!

Combined chalet-style houses projects, construction technology step by step

Holes were not forgotten here

Step 6. The second floor is sheathed from the outside with imitation of timber according to the previously verified scheme.

Combined chalet-style houses projects, construction technology step by step

Sheathing scheme

Combined chalet-style houses projects, construction technology step by step

Wall cladding of the second floor with imitation of timber

Step 7.

Aerated concrete walls are primed and plastered from the outside. The walls are painted with white facade paint.

Combined chalet-style houses projects, construction technology step by step

Facade metal mesh

Combined chalet-style houses projects, construction technology step by step

External plastering of walls

Combined chalet-style houses projects, construction technology step by step

Painting the walls

Step 8. The vertical columns of the building are sheathed with decorative stone. But before that, a reinforcing mesh is laid, and a concrete mixture is applied to it.

Combined chalet-style houses projects, construction technology step by step

The cement mixture is applied over the mesh

Combined chalet-style houses projects, construction technology step by step

Laying decorative stone

Combined chalet-style houses projects, construction technology step by step

Photo of the installation process

Step 9. Installation and decoration of windows is performed. Plastic frames are inserted into the window openings. Outside, neat platbands are made out.

Combined chalet-style houses projects, construction technology step by step

Window installation

Combined chalet-style houses projects, construction technology step by step

Window decoration

Combined chalet-style houses projects, construction technology step by step

Installation of platbands

Combined chalet-style houses projects, construction technology step by step

Interior design

Step 10.

The basement of the building is covered with panels with decorative stone.

Combined chalet-style houses projects, construction technology step by step

Plinth trim with decorative stone

Combined chalet-style houses projects, construction technology step by step

The plinth is trimmed with decorative stone

Combined chalet-style houses projects, construction technology step by step

The base is ready

The price of decorative stone

Decorative stone

Step 11. The final house turned out in accordance with the project.

Combined chalet-style houses projects, construction technology step by step

Chalet style finished house

Video - Chalet style house design and interior

Video - Chalet house project

This is how you can build a cozy alpine chalet house. Agree, the structure turns out to be really tasteful - neat, without unnecessary frills, but still attractive and pretty.

Such a house will look great both as a country residence and for permanent residence in the private sector.

.

Correct pie of the wall of a frame house with insulation
Correct pie of the wall of a frame house with insulation

Posted By: Work Style |06, Nov 2020

DIY profile making and installation for LED strip
DIY profile making and installation for LED strip

Posted By: Work Style |12, Nov 2020

Step-by-step instructions + Photos and Videos
Step-by-step instructions + Photos and Videos

Posted By: Work Style |03, Nov 2020