Design options for the apron of the kitchen working area + photo

Design options for the apron of the kitchen working area + photo Working apron for the kitchen - design ideas, description of materials

In an apartment or house, good owners almost never have "secondary" rooms, namely those in which no one pays special attention to the decoration. For example, the kitchen, and although it is not a living area, they still try to arrange it in such a way that everyone would be pleased to be in it.

Moreover, in our tradition, the cuisine often becomes a kind of "home club", or a place to receive close friends and relatives. For this reason, the decoration of such a room should be given special attention.

General information

One of the most problematic areas of finishing in the kitchen is the wall along the work surface of the table, above the sink and stove.

Most often, it is designed as a working apron for the kitchen, which can be made of a variety of materials. When determining the parameters of this zone and the choice of material, certain rules should be followed.

For this reason, when planning renovations, most owners of houses and apartments often wonder what is the best way to make an apron for the kitchen, so that it fits perfectly into the interior and is also practical to use. Let's try to deal with this problem.

Criteria for choosing a material for an apron in the kitchen

It will not be a secret for anyone that on the finish of the lower part of the wall along the workplace, stove and sink often have a negative impact.

This includes high temperatures from the hob, splashing water, steam, grease, vegetable and fruit juice. Mechanical impact is not excluded. And this will indicate that material for arranging an apron must meet a number of requirements.

This may include the following:

  1. Resistant to high temperature, because the apron runs along the slab, where food is prepared. For this reason, heat will come not only from the hob itself, but even from heated dishes.

  2. Design options for the apron of the kitchen working area + photo Material resistance to moisture. steam from cooking food, high levels of humidity and splashes with direct contact with the area along the kitchen sink - these factors should not be intimidating to the finish that covers the wall.
  3. Easy to clean the surface of the finishing material. Everyone knows that the working area of ​​the kitchen gets dirty very quickly, and therefore you have to wash it often enough. So that the cleansing process does not take much time, and also does not require a lot of effort, you should choose just such a material that is not able to absorb any substances, from dyes to fat and juice from fruits.

    Moreover, it is much easier to remove grease and dirt from a smooth surface than from one equipped with a relief pattern, and it is also important to think about this beforehand.

  4. Hygiene of the finishing material. This includes the environmental qualities of the material, and the above-mentioned ease of cleaning, as well as the absence of the likelihood of accumulation of mud and fat deposits. The problem is that all layers become a very favorable environment for the reproduction of microflora, and even pathogenic bacteria that are very dangerous to human health can be attributed to them.
  5. Decorative finishing - a very important criterion for evaluating the material for the apron, because it will set the design solution for the room as a whole.

    The first thing you should definitely pay attention to when entering the kitchen is an apron, which occupies a fairly large wall area and is located at eye level.

It is very important to think over the color of the finishing material, because it should not strain the eyes, and the first housewife should like the drawing on it, because she spends more time in the kitchen than the rest of the family.

Varieties of materials

For the apron of the kitchen desktop, not so long ago there was not a wide variety of materials for decoration, and usually paint was chosen for this purpose , wallpaper or, at best, single-color ceramic tiles, which were incredibly hard to find material. At the moment, the assortment of finishing materials is so diverse that when you come to specialty stores, you may be confused when choosing the best option. For this reason, we suggest that you consider different types of finishes and then analyze them, compare them with each other and, based on the advantages and disadvantages, choose the one that suits you best.

Ceramic tiles

Such tiles have long been the standard option for decorating an apron in the kitchen. It has not lost its popularity even today, especially since the range of tiles is constantly growing. The demand for the material is due to its characteristics, which will fully meet the criteria for choosing a wall cladding in the kitchen. The practical qualities of ceramic tiles are undeniable because they have many advantages and the list includes the following:

  1. Resistance to moisture. Ke frame has a low level of porosity, and therefore its structure practically does not absorb moisture - this can explain the inertness of the material to the effects of steam and water.

    If moisture does not linger inside the material, it means that there is no favorable environment for the reproduction of various bacteria that are harmful to the human body.

  2. Design options for the apron of the kitchen working area + photo Ease of care . On a glossy n surface of such a finish, dirt is not strongly retained, and the material itself does not absorb grease, odor, and natural dyes that are found in vegetables and fruits. For this reason, it is quite easy to wipe off drops of various substances that have fallen on the surface with a regular dishwashing sponge dipped in soapy water.In extreme cases, you can use household chemicals, and the only agent in the world that can damage the surface of ceramic tiles is hydrofluoric acid.

  3. Ceramic tile weight . The manufacturer will calculate the mass of the wall tiles so that they are easily adhered to a vertical surface (of course, using a special adhesive). For this reason, the process of assembling the material is not the most difficult, and even women can do it.
  4. Duration of operation . Ceramic tiles can only be chipped or scratched with a lot of effort.

    This material will collapse only with a sharp mechanical impact, for example, from a strong accented blow with a metal object.

  5. Inertness to high temperature . The tile does not melt or burn when exposed to high temperatures, and this is especially important for positioning it along the hob.
  6. Environmentally friendly material . Even when heated, the coating does not emit vapors hazardous to human health and the environment.

  7. Variety of patterns, colors and linear measurements . Modern tile materials are produced for indoor masonry, which are decorated in different styles. For this reason, choosing everything according to the same criterion will not be difficult for you.

A work apron in a kitchen made of tiles is a great solution. The material has few drawbacks if it is made in compliance with all technological requirements.

But if it is wrong to seal the seams between the tiles, then moisture will begin to get under the cladding, which can lead to its delamination from the wall. Moreover, low-quality grout will become a real haven for many bacteria, fungi and mold. For this reason, when performing work, one should seriously approach not only the laying of tiles, but also high-quality sealing of joints. Further, when you understand the merits of the material, you should consider certain nuances. This is best done using the example of a finished apron.

The disadvantage of one-color aprons is the soiling, because all dirt is immediately visible, even minor ones. It will need to be wiped every day after you finish cooking, because every drop will be visible on such a surface. If you choose tiles in one color, then it is better that the surface is smooth, because otherwise difficult to wash dirt, which has mixed with fat, will begin to accumulate in the recesses of the pattern.

Artificial and natural stone

Some homeowners prefer to use artificial or natural stone instead of standard ceramic tiles when decorating their kitchens. This category of materials includes porcelain stoneware slabs, polished blocks of natural rock, concrete or plaster tiles with imitation of the texture and color of natural stone.

It should be noted that some options are used to equip an apron, and perfectly perform their own functions, but some materials are better not to be used.

For example, large pebbles, porcelain stoneware, clinker tiles, and all materials have compliance with the requirements for arranging an apron:

  • Resistance to high temperatures, and also drops.
  • Moisture resistance - moisture absorption of porcelain stoneware is 0.05%, clinker tiles from 0.2 to 0.

    3%, and therefore natural stone, as well as glazed and fired clay are not afraid of steam or water.

  • The hygiene of the material, because it is easy to clean and does not create favorable conditions for the development of pathogenic bacteria.
  • The durability of the finish - it will serve for a very long time, and will have time to get bored earlier that it will deteriorate.
  • Beautiful appearance makes it possible to use such materials for different styles.
  • Ecological purity of natural material.

Although there are practically no drawbacks, it should be noted that the cost of materials is high, maintainability is low, and there are still difficulties in the installation work of stone cladding. But it is better not to use marble slabs to decorate an apron in the kitchen, even despite all the beauty, because in this case the overall impression is very deceptive, and the material is porous, which means it absorbs moisture, dirt and kitchen odors. Under the influence of a complex of negative influences, the facing stone begins to collapse, and the appearance will cease to be presentable.


A high-quality work apron for the kitchen is usually made of impact-resistant and heat-resistant glass, which has a large thickness. Recently, glass has become more and more popular for creating a kitchen interior, and this is easily explained by the fact that this type of finish combines all the qualities that are needed for the specifics of a room.

The advantages of glass cladding include the following:

  • The durability of glass if it is protected from a concentrated load in the form of an impact.
  • Complete material resistance to moisture.
  • Ability to apply the material in any of the existing design styles.
  • Resistant to heat.
  • Hygienic material - it does not absorb grease, odors and dirt at all.

  • Inertness to temperature changes.
  • Variety of colors and patterns.
  • Nice appearance.

The disadvantages include the high cost, as well as the large weight, which complicates the installation of panels. So that everything is done correctly, and the apron is not damaged during installation, you should entrust the process to specialists.

Moreover, such panels are often made to order, and at the same time the master must be provided with exact parameters, as well as information about what material your home is built from - this is necessary to determine the type and place of attachment.In the absence of data, when installing glass panels, great difficulties may appear.

Due to the fact that the aprons offered for sale are made of tempered and regular glass, this factor should be taken into account when choosing. Products with a large thickness are less reliable, because the material can burst due to heating to a high temperature, and to ensure complete safety, they are usually made from solid pieces of glass, which also requires a certain level of skill during installation. There are several types of aprons according to design solutions - transparent glass (protective apron), frosted glass finish (called "satin", sometimes used in combination with wall cladding), monochromatic coating (if the shade is light, then such an apron will visually expand the space) and backlit glass apron, which makes the design of the kitchen very effective.


There is also a photo printing on glass (which is currently an anti-trend), and something unusual - a mirror glass apron, which can be made from panels, mirror mosaic tiles, and medium-sized materials in various shapes.

( 2 marks, average 5 of 5 )


How to check the formaldehyde content of furniture
How to check the formaldehyde content of furniture

Posted By: Work Style |12, Nov 2020

DIY installation and sheathing- Overview + Video
DIY installation and sheathing- Overview + Video

Posted By: Work Style |05, Nov 2020

DIY basement construction + video
DIY basement construction + video

Posted By: Work Style |01, Nov 2020

Leveling the floor of chipboard under linoleum
Leveling the floor of chipboard under linoleum

Posted By: Work Style |13, Nov 2020

Step-by-Step Guide + Photos & Videos
Step-by-Step Guide + Photos & Videos

Posted By: Work Style |11, Nov 2020