DIY fuel-free generator: assembly diagram

DIY fuel-free generator: assembly diagram DIY fuel-free generator + video

It is impossible to imagine the modern world without the use of electrical energy. In connection with its widespread use, fuel-free generators are being developed and produced, which are easy to do with your own hands. Here you will learn about what it is, where and how it is used, the design features are highlighted, and there are also instructions on how to make the device with your own hands. There are also different types of generator circuits.

Fuel-free generator - what is it? This uncomplicated device is made to generate electrical energy without the use of different types of fuel.

It functions on the principle of neodymium magnets.

In a conventional motor, the magnetic field is generated by electrical coils, usually aluminum or copper. Such motors constantly require electrical power to generate a magnetic field. Then the energy losses are colossal. But the fuel-free type generator does not contain coils of these materials.

therefore, the losses will be minimal. It applies a constant magnetic field to obtain the required movement force.


Please note that this concept of permanent magnet magnetic has only come into practice since the addition of neodymium magnets, which are able to function better at full power. than the previous ferrite magnets. The main advantage is that the device does not require constant supply of electrical energy or even recharging.

To find alternative methods of generating electricity, there are many alternatives and unconventional energy sources that are also renewable. One such alternative has been the generation of electrical power from a fuel-free engine in an isolated electrical power generation system with low maintenance costs. A fuel-free appliance (as well as a generator) is an engine that will generate electrical energy around the clock without fuel (oil, sun, gas, gasoline and diesel). The driving device is a DC motor which is driven by a battery (12V or more). The battery drives a DC electric motor, and it starts to rotate a current generator (AC) to create electrical energy and at the same time will charge the battery through the diode.

The number of energy sources that are capable of functioning without carbon dioxide (CO 2 ) include wind, waves, or a surge of osmotic and photovoltaic energy. But such generators of electrical energy are still the most reliable energy sources with low operating costs, which, even in certain cases, are much better than solar panels.The use of inexpensive standard energy sources such as fuel will remain the main source of energy until the next decade, despite the negative impact on the environment.

The use of such a fuel-free type engine (or generator) to generate electrical energy is limited by the power of the DC engine and the AC device. This would imply that the presence of a DC engine and a generator with enormous power gives fuel-free engines their capabilities.

Studies have shown that the potential of a fuel-free engine around the world is more than 5 times the potential of the sun and wind, since it operates around the clock, every day, in all parts of the planet.


How and where to use the BTG generator

There are many different methods of generating energy from a fuel-free generator or engine. In every field, the use of such a device is undoubtedly beneficial. Below we have provided brief descriptions of certain areas.

On the road

DIY fuel-free generator: assembly diagram It is not difficult to make a fuel-free electricity generator with your own hands, and it can perfectly replace diesel-type engines, which are used in the vast majority of modern heavy vehicles, namely buses, trucks, trains, power portable large-sized engines.

Also, this list includes many mining and agricultural vehicles.

In the air

Both diesel and gasoline engines, which are used in aircraft, can be replaced by alternative energy sources, and even fuel-free electric generators ...

On the Water

Fuel-free devices can be a worthy replacement even for the high-speed engines found on ships, yachts and lines along the high seas.


Fuel-free generators and engines can also replace diesel engines, as well as devices that are used in mining around the world ... Likewise, fuel-free appliances are replacing engines that are used to extract natural resources, such as precious metals, coal, iron ore and associated petroleum gas.

In medical institutions

Devices are capable of replacing emergency generators (backup), which should be in every large medical institution or even in a hospital , due to the likelihood of critical situations.

In data centers

Fuel-free generators can be used for computers, and if the phone is not charging, then the generator will become an excellent charger for mobile devices. When systems and servers go down, communication can be lost, the workflow stops, data is lost, and even the entire workflow can be completely stopped.Still fuel-free electrical energy devices can be installed on the side of a two-wheeled vehicle. This must be done in such a way that as the vehicle moves, the fan begins to rotate and generate additional electrical energy.

Note that when DC motors greater than 500hp are connected to an AC device that is lower than DC motors, the maximum output of the generator can be obtained.

Design features

Make a conventional fuel-free generator from a rotor and a stator. It is the stator in the machine that does not move and is usually the outer frame of the machine. The rotor is free to move and is usually located inside the machine. They are both made of ferrimagnetic materials. The slots are made along the inner periphery of the stator and the outer rotor periphery.

The conductors are placed in certain slots in the stator or even in the rotor. They are connected to each other, creating round windings. The one in which the voltage is induced is called the armature winding, and this name is also the current that is transmitted through it. Permanent magnets are used in certain machines in order to provide the main flow of the machines.

The TPU device from Stephen Mark is fundamentally different from the rest of the fuel-free devices with its unusual design.

You cannot make this fuel-free generator with your own hands, but it does not have RF resonators. The working part of the device is made of a metal ring (its diameter is about 20 cm), on which coils made of stranded wire of great thickness are put on. The author has repeatedly shown his invention to the public, but after the original development it was decided to strictly classify it. And yet, thanks to his followers, another version was published - Ottr Ronette, which had differences from the original. She had a pair of plastic rings to which a thick pair of wire was attached.

The wires themselves were connected crosswise.

Making a fuel-free generator with your own hands

There are two most common methods of making a device with your own hands - dry and wet. The latter will require a battery, and while the dry requires batteries.

Wet Method

The following items are required:

  • DIY fuel-free generator: assembly diagram Battery.
  • Charger of the correct caliber.

  • Power amplifier.
  • AC current transformer.

The accumulator will serve as an energy storage device and also protect it. A transformer is required to generate a constant electrical current signal. The amplifier, on the other hand, will increase the level of current supply, because the initial power of the battery can be 12 or 24 V.

The charger will be required for the smooth and constant operation of the device.First, you need to connect the transformer to a permanent battery or network, and then to a power amplifier. After that, it is required to connect the sensor for expansion to the charger circuit. After that, you need to connect the sensor back to the battery.

Dry method

The principle of operation of a dry device consists in the use of a condenser.

In order to create such a device, you need:

  • Transformer.
  • Generator prototype.

Please note that this method of manufacturing the device is optimal because it can last at least 4 years without charging.

So, first you need to connect the transformer and the prototype by means of special conductors of continuous type. It is recommended to do this by welding to create the maximum strong connection.

To control the work performed, it is required to use a dinatron. Even today, new schemes for a fuel-free generator are being released, which provide for connection to certain batteries and other generators. The use of a fuel-free device has become a modern, more environmentally friendly and economical solution, but the manufacture and their selection is a task that requires special attention and responsibility.

( 40 marks, average 1.4 of 5 )