DIY garden bench + dimensions

DIY garden bench + dimensions Drawings of a garden bench made of wood with dimensions

Benches for the garden are practical and beautiful decoration for the yard, and a favorite resting place for each of the family members, young and old. How to make a garden bench with your own hands in size, and what should be a garden bench and what is required for its manufacture.

We have prepared detailed instructions, drawings and recommendations on how to make a garden bench with our own hands. The secrets of carpentry are collected in this article. We suggest starting with an examination of the author's benches, or rather their photos.

Each photo reflects the style of the author.

Requirements for garden benches

Safety of adults and children

All surfaces of garden furniture, be it a metal frame or base made of wood, handrails, backrest, everything that a person will come into contact with must be smooth, not have burrs, sharp corners and protruding nails.

If you have small children, and you are making a baby bench, then you should make sure that the height of the seat is safe for the child so that he does not fall, as well as independently climbing or descending from him. The ideal seat height for a child's bench is 0.4 meters above ground level.

Convenience of a garden bench for adults

There are also certain standards for the selection of pieces of furniture, you need to take them into account when designing a bench - the average seat height for a bench, which used by adults and children must be no more than 0. 47 meters from the ground level. The ideal backrest height for a bench is 0.9-1 meters. These characteristics provide a comfortable seating position as well as the ability to recline to relax.

For this backrest height, the ideal seat depth is between 0.45 and 0.55 meters.

The lower the bench is, the deeper the depth should be. For example, for a bench with a height of 0.

45 meters, the ideal seat depth should be no more than 0.55 meters. For greater convenience, the part of the seat that adjoins the back can be made a couple of centimeters lower than the front edge. It is required to make sure that the back is slightly tilted back - this will make it possible to take a more comfortable position while sitting on the bench, only 12-17 degrees from the right angle is enough.

When thinking about the width of the shop, you need to consider:

The minimum bench width for two people to sit comfortably at once is 1.2 meters.

If you have 3-4 people in your family, you need to take into account that 0 is required for a convenient location on the bench.5 meters for each, namely the width of the bench for four people should be at least 2 meters.

Bench mobility

Such benches will perfectly fit into almost all landscape design styles, as well as complement a garden or terrace interior, cafe or country-style baths. Regardless of the selected material, structural features and design, all garden benches must necessarily meet a number of requirements that guarantee durability, quality and convenience.

Environmental friendliness

The most environmentally friendly material for creating a garden bench is natural wood.

Beautiful woody texture, resistance to weather conditions, environmental friendliness and affordability are the advantages that give wood 100% superiority. Another commonly used material for benches is metal when combined with wood. It is very environmentally friendly, but needs to be stained, after a while it rusts, and still not as pleasant to the touch as wood.

Resistant to seasonal changes

Even in the warm season, the metal remains cold, and it is warmer to sit on a wooden bench even in winter. A bench made of artificial rattan or plastic is significantly inferior to wood and metal in terms of environmental friendliness.

Under the influence of ultraviolet rays and high temperatures, plastic products are able to release toxic and volatile substances have a specific aroma. Changes in seasons and precipitation are perfectly tolerated by country and garden furniture made from processed high-quality coniferous wood. You can also increase the resistance of wood to moisture and heat with specialized oils for wood protection. If you want to mount a bench under a canopy or even in a gazebo where perfect rainfall is excluded, treat it with an alkyd or water-based paint and varnish material. Please note that varnishes and enamels are not suitable for benches that are installed in an open space.


Unlike paintwork, oil for wood and its protection does not create a film on the wood surface, which means it does not flake off. Little will get inside the woody texture, creating protection inside. This allows wood furniture to retain its beauty for a long time. However, to renew the impregnation, it is enough to dust off the surface of the garden furniture and apply a new layer of oil to protect the wood right on top of the old one. After a while, metal benches are exposed to corrosive effects, and regular processing is also required with high-quality priming agents and paint.

Plastic products, artificial rattan benches are most affected by the environment. Temperature changes will lead to gradual delamination of the plastic, as well as the formation of cracks. Even the most expensive plastic furniture will burn out after a while and become covered with microscopic cracks, in which a fungus appears.

Materials for manufacturing


Dimensions of a garden bench made of wood are indicated in drawing. A wooden bench in the garden has not only practical functions for comfortable gatherings in the fresh air, but also will decorate the garden or divide it into zones.

Still, the use of trees for the manufacture of garden furniture has many advantages:

  • DIY garden bench + dimensions Aesthetic beautiful.
  • "Warm" Even in cool weather, you can sit without bedding or pillows.
  • Long lasting and practical - if crafted at the highest level.
  • Can be easily recoloured if the garden style or location has been changed.

Below are photos of such benches.


Making a garden bench from logs is a relatively convenient and almost free opportunity to add coziness to the garden, especially if you plan to cut down large trees , you know where you can get an unnecessary log or you have leftovers from the construction of a house from a log house. For log processing, you need a gasoline saw, and you need to saw everything along in a couple of halves. One will be like a seat. And the second back. It is imperative to provide a powerful support back, since the log itself will be heavy elements, but people who will lean on the back will add a load on the supports.

Small logs will fit the bench legs, you need to sand the back and seat surfaces. Treat them with wood preservative or oil to protect the surface.

Scrap materials

You also have the opportunity to use any materials from the yard:

  1. Parts from old barrels.
  2. Tree branches after pruning the garden.
  3. Broken chairs.

  4. Building blocks.
  5. Logs.
  6. Old boards.
  7. Spare parts from old cars (body fragments or tires).

We present you some inspiring photos that will help you find material for a garden shop in the courtyard.

What tools are required

When the drawings with the dimensions of the garden bench are prepared, you need to stock up on tools for work:

  • Instruments for measuring (square, tape measure, pencil for marking).
  • Electric jigsaw or saw.
  • Angle grinder with discs for metal.
  • Welding machine with electrodes, mask for work when using a welding machine.
  • Materials for fastening (staples, screws and pins).

  • Petrol saw for cutting logs.
  • Soldering iron for soldering seams of polypropylene pipes.
  • Materials for finishing and painting (protective oil, paint and primer).

It remains to learn how to calculate the amount of materials. Regardless of the selected material, calculations are required, and at the same time, take into account the standard dimensions of garden benches, which will ensure convenient use.

Maintain the ratio of seat depth, seat width to backrest height, and leg heights within normal sizes. The height should be 0. 45 meters, and the width of the seat is usually 0.5 meters per person. The ideal backrest height is 0.

9-1 measures, and the seat depth is 0.55 measures.