Beautiful do-it-yourself kitchen renovation - we do it cheaply and cheerfully
The kitchen cannot become magical sticks are beautiful and comfortable, and it will take some work. By itself, it will not become cozy and modern if you do not equip it to your liking. How to repair a kitchen with your own hands when you don't know where to start?
At the moment, all facing and building materials will be very expensive, and you also need to hire specialists. But it is not at all necessary to do this, and we will tell you where to start arranging the kitchen space, as well as what important points should be taken into account. Do not be afraid to make repairs yourself, so you can save money.
You can make an excellent renovation with your own hands, and for this you need to know what the room should be and, as a result, move towards the goal according to the created plan and project.
To visually imagine how the furniture and equipment will be located, you will need to draw up a detailed drawing. It is he who will help to see the room, pieces of furniture and everything else. Draw on the plan everything that will be the location in the renovated kitchen room, prescribing the dimensions of each interior item:
- At the very beginning, you need to measure kitchen furniture items, sinks and a cooking stove.
- Then indicate the location of the heating radiator, pipes, ventilation duct, sockets and hood.
- Next, start measuring household appliances, for example, a refrigerator, microwave, TV, dishwasher, washing machine and food processor.
It is recommended to measure the equipment with the doors open, at least for a microwave oven and refrigerator, this is mandatory. The kitchen set is the most important element of room equipment, and therefore its structure must be worked out extremely carefully on the drawing.
Remember to plan the lighting, the number and placement of open shelves, curtain rods and glass doors.
Let's move on to one more stage.
If the room is very small, you need to make it light - then the kitchen room will be seem bigger.Think about how to make repairs yourself beautifully and cheaply:
Please note that when calculating the required materials, it is important to know their price and make a rough estimate.
So you can decide on the financial expenses that lie ahead of you. If the price is too high for you, it is important to try to replace certain materials with cheaper analogs.
In fact, it is possible to make repairs in the kitchen with your own hands cheaply and beautifully, but first you need to remove the old coatings from the surfaces. Free up and prepare space. Take out and break everything you can.
- First, remove all kitchen equipment from the room, and then take out the furniture, leaving only the built-in furniture. If the repair will be overhaul, disassemble it too.
- After, free the floor, walls and ceiling from the old finish, knock the tiles and tiles off the floor, remove the paint and varnish material, linoleum, wallpaper, remove the baseboards. Water-based paint and whitewash can be easily removed if moistened with warm water beforehand. Old walls and ceilings of a different type (latex, oil and acrylic) can be removed with a special wash.
- If you are planning a redevelopment, demolish the old partition and remove the door, and if you plan to replace the window, dismantle it with the frame.
After finishing cleaning, you can start repair work with your own hands.
Installation of utilities should start with electrical wiring, and the points for outlets should be marked in such a way that it is more convenient to use the kitchen equipment. You will need electrical outlets near the work area - for a microwave oven, refrigerator, hood, TV, hood, and more. It is important to provide a socket for local lighting.
Next, take care of the ventilation system, and replace the old duct with new pipes. For ventilation to be effective, namely forced, you need an electric hood with a fan. It is required to mount it at a height of 0.6 meters above the surface of the hob.The water drainage and supply system must be made of metal-plastic and plastic.
They are lightweight, but durable, durable, not afraid of temperature changes and easy to install. Installation of engineering type communications is a responsible business and requires certain skills. If you do not have them, then entrust the specialists to carry out this repair stage.
After finishing the preparatory repair stage, you can start cladding. Multi-tiered ceilings made of plasterboard sheets look very nice.
start from the ceiling. It can be made as follows:
If you decide to paint the ceiling, then choose a moisture resistant paint.
For example, a water-dispersible silicone, acrylic or latex compound. Before painting, it is important to level the ceiling surface with gypsum plaster and supplement with putty. If the choice is made in favor of a stretch ceiling, please note that it must be installed after the wall cladding. Next, level the walls, and it is best to do this with gypsum plaster, for example, Izogypsum or Saten-Gypsum. Wallpapering will be an inexpensive option for wall decoration, and it is best if these are washable canvases, because water will constantly spray on them, soot and grease will accumulate.
Wallpaper for painting will also be an excellent solution, as they are beautiful and practical. In most cases, the wall section in the working area is tiled. But you can tile all the walls of the kitchen, and this solution will be very practical.
After repairing the kitchen with your own hands, you can make a cheap floor with your own hands:
- If the floor is made of concrete, then the screed for it can be made from a ready-made mixture of a self-leveling type or homemade sand cement mortar.
- If the floor is made of wood, then you need to test it for strength and replace it as needed, and then level them with plywood.
- If you want to install a floor heating system, then first you need to level the base with a screed. After that, lay pipes or heating wires, and this should be done in the manner recommended by the manufacturer's instructions. Then fill the warm floor with another layer of screed.
Level the base, lay the selected floor covering - tiles, linoleum, laminate or other material.
When carrying out repairs in the kitchen, do not forget about the floor plinth.
Plastic or metal strips are ideal for the kitchen, and wooden skirting boards are impractical, because without a protective coating they are afraid of cleaning compounds and water. The standard length of plastic skirting boards is 2.5 meters, and to calculate how many you need, measure the perimeter of the kitchen, add a margin of 2 meters to the resulting figure and divide the number by 2.5 meters. According to the number of outer and inner corners, buy elements for the corners.
It is easiest to cut plastic skirting boards with a metal saw, and you need to mount them, starting from one of the corners or doors, and attach the strips with plastic dowels. Besides the floor skirting boards, there are also ceiling skirting boards, that is, baguettes. They close the gaps between the ceiling cladding and the walls, emphasize the abutment between such surfaces and make the design of the room more aesthetic. A ceiling baguette can be plastic or plaster, and the latter option is installed after wall and ceiling cladding.
If you decide to update everything during the repair work in the kitchen, you will need to replace the kitchen door.
It can be made of wood or MDF. It can also be in full meta with glass inserts or 100% glass. But this door needs constant maintenance, and the laminated MDF analog is more practical and no less beautiful, and in addition to a simple swing door, you can install sliding doors. This canvas will save a lot of space in the kitchen.
Next, you need to put the kitchen set according to the originally drawn plan.
Then install the sink, and the best option would be a stainless steel sink. Use cardboard packaging as a template for cutting the sink into the countertop. Before punching the hole, outline its outline on the template. After that, cut out the seat with a jigsaw, install the sink and fix it with self-tapping screws in an interference fit. It remains to install the mixer.
The last step is to install the kitchen equipment. There will be no difficulties with a refrigerator, microwave oven and dishwasher, and they only need to be put in place, and also connected to outlets. If there is a washing machine in the working area, you will need to connect it to the water supply and sewage system. The hob must be connected to the gas pipe with a special hose.
It is not difficult to make repairs and come up with a kitchen design with your own hands.
The main thing here is that everything is properly planned, buy enough building materials and do everything neatly, without haste. The video in the article will help you understand how to update your kitchen space.
Posted By: Work Style |06, Nov 2020
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |02, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |08, Nov 2020