DIY profile making and installation for LED strip

DIY profile making and installation for LED strip Making and installing a profile for an LED strip with your own hands. Recently, LED strips have become very popular. They are often used as a bright element and variation for lighting in a private house / apartment, as well as in commercial buildings. Such great interest helped to change the opinion of people that it is difficult to make a room beautiful and modern.

Today, it is LED products that are used, which should be attached using special profiles.

With their help, you can not only provide full protection, but also quickly install such lighting devices. You've probably heard a lot of information about such a device, and you know how to choose the right one. If we consider the profile for the LED strip and other elements that are considered decorative, then there is not much information in this situation. Because of this, when making a profile for an LED strip with their own hands, most people have difficulties and problems.

Varieties and purpose according to the installation method

At the moment, experts classify only three types of profiles that can be used to install LED strips.

By the very method of installation, you can divide the contours into the following subtypes :

  • Angular.
  • Overhead.
  • Mortise (built-in).

As practice has shown, corner profiles (by the way, they are made of aluminum) are usually sold complete with a special diffuser, which can be removed if necessary or at will. A diffuser is required in order to protect the eyes from the bright light that LED strips are capable of emitting.

At the same time, while you are busy with the production of the project, you should pay attention to the fact that with the help of a diffuser, light losses reach up to 40%, although most often the indicator is not more than 1/4 of the total light (25%).

But embedded profiles are often used in order to bring design solutions to life. Thanks to them, you can even connect parts of chipboard or drywall together. In the place where the profile is installed, an LED strip is laid. Sometimes it can even protrude above the surface of the profile, and in other cases (which happens most often) it is in a depression and never goes beyond the surface level.

DIY profile making and installation for LED strip If we are talking about a cut-in type of profile for an LED strip, then its distinctive quality is that it has an edge that perfectly covers even irregularities, and they are very often found at the edge. With the help of the cut-in profile, you can illuminate the room so that the LEDs do not stick out in any way. It is simple to use such a product - the installation of a profile for an LED strip is made by cutting out a recess in chipboard / drywall, which will have the form of a mortise element. The depth must be such that the LED product is completely hidden.

In the chipboard, cut out a recess in the shape of the element that will hide it, and as a result you get, for example, a wall cabinet, which will be highlighted from below.

The cover profile can be installed on a wide variety of surfaces. The interesting thing is that this way you can attach it to self-tapping screws and even glue it with glue. If the overhead profile is made of plastic, then it will bend well. It so happens that this type of profile can be used without problems for any surfaces that have bends. Quite often, an overhead contour is used to install LED products around the circumference of the arch or inside it.

Varieties in shape

Making a profile for an LED strip is not the most difficult task, but first you need to choose the shape of the product. This is very important, since further work will directly depend on this. Particularly popular at the moment are those contour models that are made in the form of a rectangle. It should be noted that this form also includes the standard cut-in profile, which sometimes has a small additional shelf designed for milling.

Products that have a rounded shape are considered universal.

They can be perfectly combined with different types of lighting and in different positions. Interestingly, when using the round profile, it is possible to implement even the most complex track systems. Note that a modification of this type of system is a panel with slightly rounded edges. It is important that the installation is carried out using a special overhead technique.

Much less popular with profiles with complex shapes.

Sometimes they are triangular, but very durable. They are most often used for installation in floor coverings where a lot of weight is required. The use of contours with a special configuration is required when the usual profile for the LED strip is not suitable. Some types of profiles make it possible to place lighting even at different inclinations in relation to the mounting surface.

The model of a suspended profile is becoming more and more popular.

Such devices do not need to be arranged anywhere or even mechanically fixed. The panels can be suspended using special strong ropes. Thanks to such suspended structures, in each room you will provide not only the brightest possible lighting, but also a beautiful, original and unique design move.

Self-made aluminum profile

The contour made of aluminum is quite popular, as it has managed to combine two excellent technologies. Experts were able to place in one product not only a high-quality and strong anodized alloy, but also LED technology, which is becoming more popular every day.

Due to this, it is possible to increase the functionality of the backlight several times and make the device for installing LEDs much stronger and more reliable.The contour, which is often made of aluminum, can be used to directly install the LED strip into the wall. In addition, an aluminum profile for such products can be safely used to install lighting on the ceiling, on the floor and in other places.

The aluminum profile will look great in various designs, and at the same time it will never damage other material and its integrity. At the same time, aluminum contours come in non-standard shapes, which means that modern models can be decorated with various accessories.

For example, you can often see plugs or clamps on sale, sometimes even holders that look very beautiful, modern and stylish, but at the same time the style is restrained. An aluminum profile is the best option if you want a classic, classic interior.

Making a box of plastic

A box of plastic, which is used to install LED backlighting, is currently used quite often. These products are inexpensive but easy to work with. The plastic contour can be made of polycarbonate, which is flexible enough to be colored, transparent and matte.

A do-it-yourself plastic box-profile for an LED strip is a sealed product that cannot be affected by any mechanical influences or temperature extremes. It is also interesting that the use of such products is possible in various conditions and for the realization of the wildest fantasies and design decisions.


Most stores sell a profile at a price of 400-500 rubles per 1 m 2 , but most often the price includes 2 meters, and this is written in small print, which is not always noticeable, so pay attention not only to the price, but also meters. As a rule, you can do without an expensive Italian profile, there will be enough material from a domestic manufacturer.

Recommendations for installation

To make the installation of the profile for the LED strip as simple and convenient as possible, it is also worth considering some of the features and advice of specialists when working with the products.

This includes:

  1. DIY profile making and installation for LED strip Look closely at each element of the product you are working with. If you find parts that are oxidized or damaged, you should urgently replace them, as this will affect the operation of the lighting from the LED strip indoors.
  2. When installing LED strips, be sure to pay attention to the polarity and strictly observe the following rule - in this case, the products will function normally and there will be no damage.
  3. Ideally, tapes should be connected in parallel to avoid high voltage loads during operation.

Profiles for LED strips can be installed by hand, without the help of specialists.

If you are not so confident in yourself, you can watch useful video tutorials that will help you not only choose the right product, but also show you what are the nuances of installing a profile.

( 12 marks, average 1.67 of 5 )