Do-it-yourself construction of a fence from corrugated board. Materials. Features of the device

Do-it-yourself construction of a fence from corrugated board. Materials. Features of the device The fence serves to protect the local area from prying eyes and uninvited guests.

Recently, corrugated board is becoming more and more popular as a material for fences. This is largely due to its robust qualities and ease of installation, which can be done by yourself.

In this article we will tell you how to build a fence from corrugated board with your own hands.

Features and advantages of a fence made of corrugated board

The following advantages of a fence made of this material stand out: the use of expensive tools and special skills. Installation is much faster than, for example, brick or masonry; Profiled sheeting may well be combined with various building materials;

  • The material has stiffening ribs, due to which it has durability and strength even with a low weight.

  • Strength depends on the thickness, shape and height of the stiffeners. Due to the polymer composition of the coating, corrosion formation is prevented and the service life is increased. It can be up to fifty years old. Properties affecting strength and reliability are not lost from the height of the fence ;
  • Do-it-yourself construction of a fence from corrugated board. Materials.</p><p> Features of the device The soundproof characteristics of the material will help in protecting the site from excess noise;
  • Profiled sheet is completely safe and environmentally friendly material;
  • Profiled sheeting is available in a variety of colors. Sheets have color retention properties and do not change color over time;
  • Another positive point is its inexpensive cost;
  • Profiled sheeting has a certain resistance to wind gusts;
  • It is universal material. Can be used both for the construction of fences and garages, sheds and various utility sheds;
  • Installation work using corrugated board is very easy and simple, can be done independently, even alone;
  • Material is easy to clean , washable in the usual way;

Note: When choosing a profiled flooring, it is better to give preference to wall sheets with a lighter weight.

The wall sheet comes in a variety of shapes and styles. In addition, they are much cheaper than roofing counterparts.

There is a certain classification of corrugated sheets:

  • Material marked with the letter C is deciphered as wall profiled sheets intended for the construction of walls, fences , partitions and as decorative facing surfaces;
  • Marking H means that the sheet is load-bearing can be used in the construction or strengthening of the supporting structure;
  • NS - universal sheets for roofing, for, building walls and overlapping structures;

Note: The wall profile differs from the supporting one in terms of the height of the trapezoid and in that they have stiffeners.Therefore, for the construction of structures with a significant load on the material, the priority is the use of corrugated board N. The length of the sheets can be from 0.

4 to 12 meters.

Note : The standard sheet height is 2 m. Profiled sheets are stacked overlapped, where the large edge of the rib covers the edge smaller rib.

A little about the cost

Certain factors affect the price of corrugated board:

  • What is the thickness of the metal;
  • What shape is the profile;
  • What type of protective polymer coating.

As the thickness of the metal increases, its price increases.

So, the cost of a sheet with a thickness of 0.8 mm will be more than a sheet with a thickness of 0.3 mm by about 5 times.

The most budgetary option would be to purchase a galvanized profiled sheet. Thanks to the zinc coating, the material is resistant to corrosive formations, unlike conventional sheets.

The corrugated board, which has a polymer coating, has a high degree of protection, but its cost is more than thirty percent galvanized.

The higher the profile, the higher its stiffening rib and, accordingly, the bearing capacity. Therefore, the price of this material is higher.

The marked figure shows how high the wave is and is measured in millimeters.

For self-construction of fences, wall profiles are most often used.

They are the most economical, and roofing is used less often.

Note: You can purchase products that are not promoted, but of good quality.

Materials

For the structure of the fence, you need to prepare the following materials:

  • Protruba 60 * 60 mm for the device of supports. The pillars are dug in in increments of up to two and a half meters;

Note: Supports can also be log pillars, as well as various masonry. However, for the ease of an independent device, it is better to take iron ones.

  • Fasteners;
  • When joining at the joints, a riveting machine is used;
  • You also need a welding machine with electrodes for building the frame;
  • As well as other tools - drill, building level;
  • Materials for concrete mix, a reservoir for it;
  • For planning stakes and twine;
  • Paint.

Installation of the fence

First, mark the territory. It is produced by driving stakes in the corners, between which the string is pulled. Then a plan for the future fence is made.

Note: Without drawing up a diagram, it is impossible to correctly design a fence and calculate the required amount of material.

Do-it-yourself construction of a fence from corrugated board. Materials. Features of the device Further along the perimeter, holes are dug using a hand drill.

All pits are made of the same depth, because the evenness of the installed supports depends on the evenness of the entire fence.

The supports must be placed in a straight line and maintain a certain step, which, as already described earlier, is not made more than two and a half meters.

The supports should be well strengthened, because wind gusts will act on the fence. For this purpose, a medium fractional gravel layer from 150 to 200 millimeters is poured into the pits. After that, they put supports in them and fill them with cement mortar.

Important: When pouring concrete mixture into the holes, it is necessary to pierce it with the help of improvised materials to get rid of the remaining air bubbles.

When installing the supports, you need to use a plumb line so that they stand in a strictly vertical position. For a strong fixation of the supports, metal rods are welded to them from the sides and buried in the soil.

As soon as the solution hardens, they begin to fix the lag. A professional pipe with a section of forty by twenty-five millimeters can be used as a lag.

The required number of profiles depends on the height of the fence. For example, for a 1.7 m fence, two are enough, and for a two meter fence, three logs will be needed. One will be placed on top, the second in the middle and the third on the bottom. When arranging the upper and lower lags, you need to retreat from the edges by four centimeters.

Welding to anchor the profiles will be the safest option. To protect the pillars from the occurrence of corrosive formations, they should be treated with a special primer. And it is advisable to do this even during the construction process, since after the completion of the work it will be difficult to work with the primer mixture.

When setting up a fence, it is important to consider the soil types in the area. So soft soils in the spring are prone to subsidence, which will happen with the pillars.

On such soil, you should not arrange strip foundations under the fence. Even with eroded soil near the foundation, it will firmly and firmly hold the fence.

And the final stage will be the installation of corrugated board. It is fixed on the lags. Here self-tapping screws for metal are used as fasteners.

Conclusion

The fence made of corrugated board is reliable and durable, which can easily withstand bad weather, temperature fluctuations, as well as severe frosts and heat.

Not quite aesthetic support pillars can be faced with decorative or natural stone or brick. That will give the fence even greater strength and a beautiful view of the expensive. Profile sheets also look very good in combination with forging.

When building a fence made of corrugated board, the formation of scratches is inevitable, which can be easily eliminated by tinting with paint from a spray can.

The main thing is to choose suitable colors in advance.

From the outside, such a fence is a seamless, solid wall that perfectly protects your area from prying eyes.

As for the care of such a fence, here you only need to periodically clean it from dirt.

.