drawings and dimensions - Step by step instructions! Ideas + Video Examples

drawings and dimensions - Step by step instructions! Ideas + Video Examples A well on a personal plot is a common thing. But in order for it to fit into the landscape design, you need to work hard. Now on the market there are many houses for a well, different in appearance and price, but it is much more pleasant to make such a house with your own hands. In addition to aesthetic pleasure, this building protects well water from sunlight, dust, dirt and serves as an obstacle for children and animals. In winter, the water in the protected well does not freeze.


Before you start making a house for a well, you need to prepare a woodworking tool.

[contents ]

For work you will need: electric planer, hacksaw, level, saw, electric jigsaw, hacksaw, construction pencil, screwdrivers and hardware (screws, nails, hinges, pen , lock on the door of the house).

Depending on the type of house for the well, we stock up timber, edged boards, roofing materials to your taste and wallet and an antiseptic for impregnation. The main thing is that the finished house is durable and consistent with the design of the site.

Houses for wells are open and closed

drawings and dimensions - Step by step instructions! Ideas + Video Examples Of course , an open house is easier and cheaper to make.

The well ring is trimmed with wood or stone, a canopy (wooden or metal) is arranged and a cover is made on the well.

The advantage is that a minimum of materials are consumed, but the water in such a well will freeze in winter. Although there is a solution here. The well can be insulated using expanded polystyrene before finishing the well, and the cover and overlap for the ring can be made using several layers of boards, and they are laid in different directions to cover the joints.

Closed house for a pit with a gable roof

drawings and dimensions - Step by step instructions! Ideas + Video Examples
Frame house

This is one of the most popular and simple design houses.

The material usually used is that left over from the construction of larger construction projects.
We start with making the frame.

Let's prepare a bar with a section of 80mmx100mm, and an edged board, 40 mm thick. These are the most optimal sizes of lumber, they will not make the structure heavier, and at the same time make it strong, then the house will withstand the wind load.
We prepare four racks from a bar that are suitable in size for the lower and upper strapping 120 cm wide.

Having cut the boards to size, we begin to nail them to the racks. For fasteners, we use 10 cm nails, they will firmly connect the parts to each other.

To get an even and strong frame, we assemble it in a certain sequence. We connect two racks with boards first from below and above, then do the same with the other two racks. Having placed them around the ring, we finally connect them with straps.


We begin to make the roof with the manufacture of building trusses - this is the structure on which we will fasten the crate.

drawings and dimensions - Step by step instructions! Ideas + Video Examples

Choose the length of the boards yourself, the height of the house for the well will depend on it.For the crossbars and jibs, we take boards 2.5 cm thick.You should get 8 jibs, 3 crossbars and 6 rafter legs.

Having cut the rafters at an angle, we connect the upper ends to each other. We fasten with self-tapping screws.

This structure is best assembled on the ground.

Crossbars are used for additional strength by placing them below the top attachment point of the rafters by 30 cm. On the rafters, where they will be connected to the boards of the upper strapping, we make a cutout.

drawings and dimensions - Step by step instructions! Ideas + Video Examples We connect the frame and rafters using nails. Strengthen the installation of rafters by installing jibs.

Connect the trusses with a ridge, a structure of two boards. Next, the crate is attached at intervals of 15 centimeters.

The protrusions on both sides should be 10 centimeters each.

We cover the roof with slate or metal, covering the corner joints with wind boards. We make the cover of the house - this is a board made of boards, which is made in a simple way. Having cut the boards 20 cm wide and 85 cm long, we begin to fold one to one, fastening together using two bars, which we fix with self-tapping screws one from above, the other from below.

To stiffen the product, you need to nail a block diagonally. Next, we sew the gables, fasten the handle with a latch and hang the lid on the hinges.

The house for the well remains to be treated with an antiseptic and covered with varnish or paint.

drawings and dimensions - Step by step instructions! Ideas + Video Examples

House made of timber

drawings and dimensions - Step by step instructions! Ideas + Video Examples These houses create a unique flavor on any site.

To make a house from a bar, it is necessary to prepare:

  • rounded logs;
  • edged boards;
  • roof covering ;
  • material for making a gate with a handle.

Fold the frame from the rounded timber to the size of the well. The connection can be made using any method convenient for you.

Then install two posts - supports using a bar.

A wide roof structure must be installed on the support posts. You saw how to do this in the previous instruction. Everything is done in the same way. The ends of the logs should protrude, this will protect the well shaft from precipitation.


Hexagonal house for the well

drawings and dimensions - Step by step instructions! Ideas + Video Examples In fact, this is one of the varieties of the previous building . The difference is in the greater number of faces.

Such a blockhouse is very compact, which allows it to be used in small areas.
The construction of such a house is carried out using the same technology as a quadrangular blockhouse from a bar.

To build such a house, we recommend taking a ten centimeter beam.

The roof can be decorated with wooden planks, which will give the building an original look.

They also finish the work with antiseptic impregnation.
We have considered several types of houses for wells that you can make yourself.

Decorating such houses can be done in different ways.

drawings and dimensions - Step by step instructions! Ideas + Video Examples
Implement any ideas for your well

Very popular decoration with carving.

Such a house will fit into any interior. Coloring is also a simple and popular form of decoration.

Modern impregnations can change not only the color but also the texture of the material.

The building can be decorated with a figurine of an animal made of wood or ceramics.

Of course, every house for a well, which is made by hand, is individual.

It all depends on the imagination and skills of the owner of the site.

drawings and dimensions - Step by step instructions! Ideas + Video Examples
House for the well - device

.

Step-by-step instructions + Photos and Videos
Step-by-step instructions + Photos and Videos

Posted By: Work Style |04, Nov 2020

Is it necessary and how to properly insulate + Video
Is it necessary and how to properly insulate + Video

Posted By: Work Style |06, Nov 2020

Silicone-to-silicone adhesive
Silicone-to-silicone adhesive

Posted By: Work Style |04, Nov 2020

An interior that doesn't go out of style
An interior that doesn't go out of style

Posted By: Work Style |05, Nov 2020