Glueing a Styrofoam ceiling skirting board? Review + Video

Glueing a Styrofoam ceiling skirting board? Review + Video The final stage in finishing the ceiling is the installation of the skirting board. Ceiling plinth is not only a decorative element, but also a means for closing the joints between the walls and the ceiling itself.

In addition, the skirting boards well outline the contours of the room, making it visually more spacious and complementing the entire interior.
You can glue the ceiling plinth with your own hands. Below we describe in detail how to quickly glue the ceiling plinth.

[contents ]

Selecting a ceiling plinth

Glueing a Styrofoam ceiling skirting board? Review + Video The first thing to do before buying skirting boards is to calculate the number of skirting boards. Consider an example of calculating a standard room: length - 5.7 m, width - 4.5 m.Calculate the perimeter of this room, it is equal to 20.

4 m. In stores, plinths are sold in segments of 2 m. Divide the perimeter into two, and get 10 pieces. Plus one plinth for revision, it turns out 11 pieces.

If there are columns in the interior, they will need to be measured with a tape measure and the resulting length added to the overall perimeter.

It's okay if a few skirting boards remain. If necessary, it will be very difficult to buy the same cornice in the future.

We have decided on the length. But the width of the baguette is different, from 2 to 10 cm.This parameter can be selected based on the height of the room.

Glueing a Styrofoam ceiling skirting board? Review + Video A wide ceiling plinth makes the room visually lower

When buying, you should pay attention that all skirting boards are were from the same batch. Because the shade differs in different batches.
Also, when purchasing, you should inspect each skirting board for various defects. This applies to foam products, they are often curved.

For gluing skirting boards you will need:

  • glue;
  • Glueing a Styrofoam ceiling skirting board? Review + Video sandpaper;
  • sealant.

Of the tools, the following will not be superfluous:

  • hacksaw;
  • pencil;
  • knife for cutting skirting boards ;
  • roulette; assembly gun;
  • masking tape.

Which ceiling plinth to choose

Glueing a Styrofoam ceiling skirting board? Review + Video

There are several common materials from which ceiling skirting boards are made. Before buying, determine what exactly you want to buy and what material suits you best. Below we will consider the types of materials for ceiling plinths.

Styrofoam ceiling skirting board has two advantages: low weight and affordable price.

For budget and high-quality repairs, this option is ideal. In addition, the foam skirting board is very easy to work with.

The disadvantage of this material is its high flammability and fragility. The fragility of this part makes work difficult. And in the bathroom, such a plinth cannot be installed, since the foam does not tolerate a humid environment.

This skirting board goes well with plasterboard surfaces. In this case, it is installed on a gypsum filler.

It is possible to glue the foam ceiling skirting boards to the wallpaper, but it is better to glue them before renovation work.

Glueing a Styrofoam ceiling skirting board? Review + Video

This is necessary in order to change the wallpaper after a certain time without removing cornice. And the ceiling can be painted at the same time as the ceiling plinth.

The use and installation of a Styrofoam cornice is the same as a Styrofoam molding

Cutting the corners of the ceiling molding

Glue the ceiling molding correctly is the key to success. You need to start from the corner, and it is better to cut all the details in advance. The foam is easy to handle, so you can use a regular assembly knife.

To do this, you need to take the plinth and draw a line with a pencil Glueing a Styrofoam ceiling skirting board? Review + Video at an angle of 45 degrees. Next, cut with a knife along this line.

The same actions must be performed with another skirting board so that the resulting corners are exactly joined. You can practice on old scraps if you are not confident in your abilities.

After the final fitting, sign each piece to avoid confusion during the bonding process. The gap at the joints of corner skirting boards should not exceed 1.5 mm.

If the gap between the skirting boards is much larger, then do not despair. A sealant will help you solve this problem. You can also push a narrow strip of ceiling plinth into a large gap, and then fix it with glue.

How to glue the ceiling plinth?

For high-quality adhesion to the putty, the surface of all walls is primed.

Glueing a Styrofoam ceiling skirting board? Review + Video

Next, the mixture is evenly applied with a spatula on the back of the skirting board.

Then press firmly to the joint, remove the excess solution and wipe the plinth with a damp cloth.

For a good fit, sand all edges of the foam ceiling plinth. Seams are covered with putty or acrylic sealant.

After the whole structure has dried, all seams are sanded and painted. Any water-based paint is suitable for painting.

If the wall is uneven, you will need additional fixing of the skirting boards in the form of masking tape. It is easy to remove after completion of work, leaving no marks even on the surface of paper wallpaper. You can glue the ceiling plinth to the wallpaper on liquid nails.

After finishing work with the skirting boards, you can proceed to the subsequent decoration of the room. If you are going to paint the ceiling, then the baseboards will have to be painted with the same paint.

Plastic ceiling plinth

Glueing a Styrofoam ceiling skirting board? Review + Video Due to its affordable price , the plastic skirting board has become very famous . Not only ceilings, but also walls are made of this material.

There are several types of plastic skirting boards, and their use depends on how the plastic structures are installed.

You can glue the plastic ceiling plinth with glue, and connect the corners with special overlays. This setting is not difficult.

But the question may arise : What glue to glue the ceiling plinth?

Currently, manufacturers offer a wide range of glue for working with plastic products.

There are plastic skirting boards that do not need a frame during installation. This type of installation is especially relevant in bathrooms.

Glueing a Styrofoam ceiling skirting board? Review + Video There is high humidity in the bathrooms, and the metal frame is not suitable for this. And the plastic skirting board, in this case, is the solution to this problem.

This skirting board has a groove into which a plastic panel is inserted.

Trimming the corners of this ceiling plinth without a special tool will not work . There are carpentry tools that are specifically designed for sawing different plastic planks.

Such tools can be used to cut of varying complexity, and, as a rule, only professionals use it. Instead of a hacksaw, they also use an electric jigsaw.

All edges after cutting are processed with sandpaper. Sealing and fitting of joints does not differ from the technology described above.
Acrylic sealant is used in work with almost all polymer building materials.

Polyurethane ceiling skirting board

Due to the flexibility of the skirting board, it can be run along an oval column.

In addition, the color of the skirting board can be changed by painting.

The scope of this type of skirting board is much wider than others.

It is ideal for decorating any structural details and elements.

Glueing a Styrofoam ceiling skirting board? Review + Video

Plinth made of this material is used for stretch ceilings and in rooms with complex configuration

Wooden ceiling plinth

These plinths are used when the room is sheathed with a board, MDF or chipboard . Wooden skirting boards are used as a decorative element.

The skirting boards themselves are mounted on special wooden mechanisms, and small decorative elements are glued to the glue.

Glueing a Styrofoam ceiling skirting board? Review + Video For a more correct arrangement of all parts, the plinth is marked. The line of the skirting board should be below the bars. Further, the places for the mounting holes are marked, with a step of 45 cm.

Having drilled all the holes and fixing the wooden plates, the plinth is attached to them. Moreover, it is better not to use nails.

The ideal option would be to mount on self-tapping screws. They are sunk into the wood, and then, the outer holes and all joints are simply putty.

For cutting corners and other operations on wooden skirting boards, use the same tools as for other types of skirting boards.

Any work is best done with a good mood and soul. And we hope that our article will help you perform it correctly.

.

Epoxy putty: advantages and disadvantages
Epoxy putty: advantages and disadvantages

Posted By: Work Style |01, Nov 2020

Overview inside and outside + Video
Overview inside and outside + Video

Posted By: Work Style |13, Nov 2020

negative impact and how to get rid of + Video
negative impact and how to get rid of + Video

Posted By: Work Style |01, Nov 2020

Dyes for concrete - a list of the best
Dyes for concrete - a list of the best

Posted By: Work Style |10, Nov 2020