Grease remover for sewer pipes

Grease remover for sewer pipes Cleaning the sewer pipes from grease

During the operation of the drainage system and the general system, grease begins to accumulate on the pipes, and because of this, it will be necessary to clean the sewer pipes from fat. It is important that you take care of the condition of the pipes in time and clean them if necessary. If the use of the sink has become completely impossible, then the owners of the house will begin to wonder how to clean the sewer pipes from fat deposits.

If the blockages are small, then you can easily cope with your own efforts, but if all else fails, you will need to seek the help of a professional service.

How to eliminate fat deposits in pipes

A blockage in a sewer pipe is definitely not the most pleasant phenomenon that creates discomfort when using an apartment or house.

For this reason, the desire to get rid of it as soon as possible is understandable. But ideally, everything will be so that you do not need to worry about it at all, and the owner will take preliminary measures to eliminate body fat.

Cleansing the sewer from fat deposits can be done in several different ways:

Each method has its own indications, as well as advantages and disadvantages.

Folk methods

The means at hand include substances that are likely to be in every home. Typically, this is vinegar, soda, and citric acid. If the water is difficult to pass through the pipes, then before buying many expensive products, it is worth trying to get rid of the grease in the sewer pipe using standard methods.


By itself, soda can be an effective tool in the fight against fat deposits. It will be enough to pour a whole glass of the product into the sink drain, and then pour hot water and cover with a stopper so that the mixture stands for several hours. This method, unlike all the following, can be used even if you have metal pipes.

Vinegar and soda

It will be a little more effective to pour not just soda and water, but pour vinegar or add citric acid to the composition. As a result of the resulting chemical reaction, the soda will be quenched, it will foam with bubbles, and this will have an effect on fat deposits, and the excessive pressure from carbon dioxide, which will be formed due to the interaction of substances, will push the blockage through.

This method is shown only for plastic pipes, but not for metal pipes, since this sometimes causes damage, and as a result, it becomes the primary cause of corrosion.


Another great remedy in the fight against fat deposits at home is any soda like Coca-Cola, sprite and other similar drinks.They contain orthophosphoric acid, which is harmless in small quantities, but it is excellent for helping to deal with blockages in pipes. There is only one drawback - the dye, which is added to carbonated drinks, can color the plumbing white, so it is better to use colorless drinks to clean the sinks.


The second method for cleaning the sewer pipe from fat is using products that contain a high content of such a component as chlorine .

.. This includes household chemicals, as well as inexpensive and extremely effective whiteness. It needs to be poured in large quantities (sometimes even several liters) into the drain and rinsed with plenty of water. There are often tips on the forums that hydrochloric acid can also be used for cleaning.


Still, improvised means help to cope with small blockages, and if this does not help, then heavy artillery will be required. There are certain chemicals for cleaning drain pipes from grease, and these are the most common options for fighting grease deposits. They are sold in the form of liquids, tablets, dry powders, granules. The latter will necessarily contain alkali, which will make them preferable for use in pipe cleaning. When exposed to heated water, a violent reaction begins, and because of this, the substance begins to actively affect fat deposits, hair and even food debris that have been preserved in the pipe, and all this dissolves.

Later, it remains only to turn on the water for the entire pressure and rinse the remnants of the product into the sewer.

It is also worth paying attention to the funds that have an antiseptic effect. They are usually marked with the label "bio drug". Such products contain bacteria that help fight the root cause of the formation of unpleasant odor from pipes. Let's take a look at the ones that are recognized as the best.

" Mole"

This fat thinner is very popular and relatively inexpensive but extremely effective. It is produced in dry and liquid form, and the former also has the antibacterial effect described above. On the market of household chemicals there are many products called "Mole", but they are produced by different enterprises, therefore the dissolution result sometimes differs a little, but most people still trust him and prefer this particular pipe cleaner. The order of use is simple - fill or pour into the pipe, leave for 2-3 hours, and then rinse with plenty of heated water.

"Mister Muscle"

Grease remover for sewer pipes Remedy produced in the form of granules and gel.

The latter is thick in consistency, able to penetrate the pipe, even if you have stagnant water in the sink, and will help get rid of blockages after 20 minutes.To do this, pour half the container into the pipe, wait as long as indicated on the package, and then rinse with more and more hot water. It should be remembered that the product is caustic and can cause burns to the skin if you do not protect them in advance.

"Ваgi Pothan "

This tool is considered one of the strongest and most effective, as it can remove grease and limescale, paper, food waste. As it is written in the instructions, it can be used to clean the sewer pipes in a house or apartment in just a few minutes.

But in this case, you should be extremely careful. Before using the product, open all windows, remove water from the sink and add substances. Also, the packaging should be kept away from yourself at arm's length, while falling asleep, turn away, and then pour more hot water into the hole of the sink as soon as possible, do not inhale the steam and leave everything for a few minutes. Then turn on hot water from the tap. The tool has an incredible effect, and therefore has earned a lot of positive reviews, but if it suddenly does not work the first time, the procedure will need to be repeated.

"Tiret Turbo"

This brand of product is well known due to advertising and positions itself as a professional cleaning of sewer pipes from grease ... Tiret is released in the form of a thick gel that can penetrate the blockage even with standing water. It can be used to clean both plastic and metal pipes.

Thanks to the unique composition, you will not only be able to eliminate the fatty blockage, but also disinfect the pipes and remove unpleasant odors. When the agent is poured into the hole, you will need to wait 5 minutes, and then rinse the pipes well with water. Despite its fame, reviews of the product are vague, 50/50.

"Dе b o u c hеr "

This is the tool that will help to rid the sewer pipes and the siphon of fatty blockages, food debris, hair, paper and threads. The 1 liter bottle is designed for a couple of uses.

So, half of the bottle should be poured into the drain hole, let stand for 1.5-2 hours, and then rinse everything with hot water. If the blockage is large or the pipe is too long, it is recommended to empty the entire bottle and leave the product to stand overnight, and then rinse everything with plenty of water. The tool does not harm enamel and plastic, but in no case should it be used for aluminum pipes.

When choosing a means for cleaning a sewer pipe from grease, you should read the instructions - different chemicals are intended for different pipes.

Some will harm metal pipes and clean plastic, while others will make cast iron products cleaner, and plastic will simply become unusable.It is also equally important to remember that everything is done carefully, and that you use chemicals only while wearing gloves, and if the product has a pungent smell, then a mask will not hurt. Corrosive substances should be hidden as far as possible from children.

Mechanical cleaning methods

Against particularly dense blockages that are difficult to remove even with the help of chemistry, mechanical cleaning agents are suitable. This is a plunger.

The principle of operation is quite simple. It should be applied to the hole in such a way that the rubber fits tightly to the sink, and pressurize the pipe with translational movements, since it is under the influence of pressure that it will be possible to remove the plug. When the pressure reaches its peak, it will help clear the pipe of even the most stubborn blockages and grease. In addition, it will not take up much space, and the size of the plunger allows you to hide it away from prying eyes.

But the most effective method will be a plumbing cable.

It is made with a length of 10 to 50 meters, with a stiff brush attached to one end, and a handle on the other. The cable should be lowered into the pipe so that it rests against the blockage, and then you can start cleaning by scrolling the handle. You will most likely need to put in some effort. Residual deposits should be washed off with plenty of water.

A drill can be used to increase the efficiency of the hand-held turntable, which will save time and effort.

Steel belts can also be used to combat complex blockages. Such a tool is equipped with a comfortable handle and various attachments for efficient work. mechanical methods help remove fat deposits, but do not disinfect the pipes in any way. This will require additional use of special tools.

Professional cleaning

Grease remover for sewer pipes If you are unable to complete cleaning sewer pipes from fat with your own hands, you will need the help of professionals.

In their work, special services use hydrodynamic devices, which are often used to combat blockages in the septic tank.

Such a device is a thick rubber tube, with a special tip fixed at its end. Water is supplied through the tube under high pressure, the lower value being 190 MPa, and it is distributed through the nozzle. The water helps to have a strong effect on the deposits, and the long cable length makes it possible to use the equipment to clean long and hard-to-reach large diameter pipes, even yard sewers.

In addition, a sectional or drum type clogging machine can be classified as a professional type device.

It is extremely effective for cleaning all types of pipes. A simpler option would be a car with a gasoline engine type that can be moved around the building and outside.

Preventive measures

As a rule, it is better not to take it to extremes, but to take care of the condition of the sewer pipes inside the house in your apartment or house regularly. It will be enough to use a bag of cleaning mixture every 2-3 months. It can be left even overnight for a better chemical cleansing effect.

The frequency of the procedure will depend on how often you use the sink.

Also, improvised means, which were mentioned above - vinegar, soda, will also be an excellent prophylactic agent. Yes, this will not help with severe blockages, but as a preventive measure to prevent blockages it will help. And the future cleaning of the sewage system from fat deposits will be much easier. Since fat can turn into a film and remain on the pipe walls at a relatively low temperature, it is better to rinse the pipes and wash the dishes with hot water.

It is advisable to avoid food residues (especially solid ones) getting into the drain, as in this case the pipes will clog up faster.

How blockages appear

Blockages can appear during prolonged use of the sink. When you wash the dishes, food and detergent residues are flushed down the piping and a film of grease forms on the walls. Debris, dirt and food particles will stick to it, which can clog the pipeline. The layer will begin to build up, the gap will become smaller, and the water will be more difficult to pass.

Such a nuisance can happen not only in the kitchen, because people often flush food debris down the toilet, and even blockages can appear in the bathroom due to soap suds. This problem is encountered everywhere - in canteens, restaurants and public institutions. The fat film is an excellent breeding ground for bacteria. Therefore, the pipes will often become covered with unpleasant black mucus from the inside, and this will cause a nauseous smell. In addition to unpleasant sensations, such consequences of pipe clogging can even become dangerous to human health.

Signs that there is a blockage in the pipe:

  • Water began to drain not as quickly as before.
  • Nothing has changed after rinsing the siphon.
  • Bad smell from the pipe.

Sometimes there are cases when stagnant water begins to overflow into another device. For example, if you turn on the faucet in the kitchen, sewage drains in the bathroom will begin to rise.

This means that there is a blockage in the outlet from the main riser or in the riser itself, if we are talking about an apartment, and not about a house. In private houses, in this state of affairs, it is worth looking for the cause in the pipeline that goes to the septic tank or cesspool.