Artificial stone looks very attractive, for this reason the interest in this material is growing.
Decorative stone is suitable for wall decoration.
With it, you can decorate the walls of your house in an interesting, original way.
We will tell you how to glue and on what, how best to place this material on the surface so that it looks interesting.
[contents ]
Decorating with decorative stone is done indoors and outdoors.
Any stones are suitable for interior decoration.
But for the exterior, natural stones or stones made of cement are better.
Such a stone is very absorbent.
If you finish the facade with such a stone, then it will be necessary to process it with something in order to avoid moisture absorption. Otherwise, the gypsum stone will quickly lose its decorative appearance.
It is best to use natural stone for decorating the facade. But keep in mind that natural stone has a rather high price.
Compared to natural stone, artificial stone is slightly cheaper and even better than natural in some properties. Manufacturers are trying to make artificial stone of various shapes and colors, so the surface decorated with it can be made with a very unusual ornament or pattern.
In addition, artificial stone is much lighter than natural, and therefore it will hold stronger.
Artificial stone will not load the wall, therefore, plasterboard walls are finished with it.
How is decorative stone laid?
Laying decorative stone is very similar to tiling, but the process is slightly different.
The choice of glue depends on what material you purchased the decorative stone from. In some cases glue can be made even by yourself
Stone made of plaster laid on glue with the same base for better adhesion of surfaces.
Cement and natural stone can be glued with DSP.
However, a stone planted on an adhesive mixture of cement will look more aesthetically pleasing.
In the event that the area for pasting with decorative stone is small, it is possible to use liquid nails.
If you need to decorate the entire wall, it will be more economical to buy special glue.
Any decorative stone has its own texture, and when gluing it it is impossible to bring out the facing by level.
Experts recommend making at least a rough alignment of the walls, that is, filling in visible grooves and cracks, removing the most prominent protrusions.
In the event that you have chosen decorative brick as the material for facing, then you will have to make a final leveling of the wall surface.
This material is glued like ordinary tiles and therefore can highlight all surface imperfections. If the stone has a shape close to natural stone, then minor defects can be missed. In the case of old finishes, the old plaster must be removed and the wallpaper removed.
If plaster or wallpaper has been applied relatively recently, but you want trim a small piece of the wall with a stone, then you need to do the following.
With the paint coating, we proceed as follows: if the paint holds well and does not peel off, then you must try to glue the stone directly to the painted surface. If the stone element holds, then we continue to glue the stones to the painted surface.
Before laying the gypsum stone, it is necessary to treat the walls with a deep penetration primer. Before laying cement or natural stone, the walls and the back of the stone are sprayed with water from a spray bottle.
If you decide to decorate the walls with stone, then before starting work, you need to lay out several square meters of elements on the floor.
It is very important to do this before facing with a free-form stone, so you will see how it will look on the wall ..
.
At this stage, they also pay attention to the color scheme.
Gluing ceramic tiles is a boring and monotonous process, but decorating a surface with a stone is a creative process.
But the stone decorating rule still exists. In the event that the wall that you want to decorate has an angle, then the laying of stones begins with it.
Decorative stone can be glued in several ways.
Some stones are glued with almost no gaps. But if suddenly you decide to leave the seams, then you need to insert special crosses into them. The glue is applied to a small section of the wall with a thick layer of about six millimeters.
The decorative stone is applied to the wall and pressed into the required place. If the glue comes out, it must be immediately removed with a damp sponge.
How to cut a decorative stone?
The stone for decoration can be cut with a grinder or an electric jigsaw. To facilitate the work, you can immediately purchase the corner pieces.
The seams between the stones are embroidered if they are very wide. After you have finished finishing the walls with decorative stone, the glue has already frozen and you figured out the seams, the decorated surface must be treated with a special moisture-resistant compound, if it is outside the building, or varnish, if the work took place indoors.
So we have come to the end of our article, we hope that you have learned something useful for yourself.
Good luck!
( 1 grade, average 5 of 5 )
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |11, Nov 2020