How to choose a strengthening primer + advice from experts

How to choose the best reinforcing deep penetration primer

In the modern world for indoor and all kinds of technical equipment are used outside. Everything is used to ensure that the main structure lasts as long as possible.

Usually there are different ways for such strengthening, but as practice has shown, the paint and varnish coating, which will significantly increase the life of structural elements, has been excellently recommended.

In this case, it should be considered that it is a reinforcing primer of deep penetration, and for what other purposes such a tool is used.

General information

Purpose and use

In practice, a deep penetration primer is used not only before coating the wall with paints and varnishes , but also for other finishes.

Let's consider in more detail the main areas of application of the finishing material:

1. Since the internal or load-bearing external walls will damp, such a protective component against moisture is used.
2. An alkyd-type primer used for improved adhesion of paintwork or for plastering surfaces.
3. This option is used for materials with high absorbency to fill the pores to the maximum.
4. Characteristics of the material makes it possible to use it for arranging different surfaces (differing in structure).
5. In addition to processing external and internal load-bearing structures, this option can be applied to the surface of ceilings and walls.

6. Quite often, the types and properties of such a substance allow its use in certain industrial sectors.

It should also be understood that such compositions have a direct purpose for use, which is why the use of an off-label purpose is capable of canceling out all the functions that were originally laid down by the manufacturer.

Please note that before considering all the main advantages of this type of coating for the wall surface, it should be understood that the composition should be applied to the surface in the correct order using a special tool.

Composition and technical properties

The choice of coating from a primer should be considered properly, and special attention should be paid to the composition. As a rule, there are such popular components here:

• Here, in production, the simplest water purified from harmful additives is used.

• Typically, the correct amount of acrylic resins is added to the product in order to improve the bond.
• In addition, the substance contains certain polymer components in order to improve the degree of adhesion.
• Separately, a certain amount of latex, antiseptic and silicone can be added to such a solution.

In all individual cases, depending on the direct purpose of the device, the number of components used, as well as the production technology, may change. Such finishing options will be distinguished by a high degree of adhesion, increased resistance to moisture, low consumption, as well as deep penetration and a low degree of toxicity.

Please note that despite the technical parameters, when performing work with such a composition in a closed room, it is recommended to use a respirator so that there is no poisoning.

Details

Consumption per square meter

Universal strengthening the primer has a certain consumption, but the product is definitely not distinguished by high consumption. We propose to consider in more detail, and keep in mind that the established restrictions relate to the consumption of such a composition per square meter:

• As a rule, when using a standard type of sprayer, you can get a minimum assignment of 0.1-0 ..

  . 15 kg per square.

• If you use a roller for work, the value will increase slightly and will be 0. 15-02 kg per square.
• Most of the money is consumed when using a brush, and it is more than 0.

  25 kg per square meter.

You should also understand the fact that the optimal value will not always correspond to the practical one. It also requires taking into account the depth to which the absorption will be carried out. Typically, the compositions are ways to go deep into the surface structure to a depth of 0.1 to 1 cm, depending on the type of surface to be treated.

Features of the product

Like any other types of primer and paint options, this variety will differ in some features. Consider all the nuances of such a tool and its practical use:

• Such a solution and its consumption will vary depending not only on the type of instrument, but also on the depth of penetration.
• Such a substance has a fast drying time, which is why it is necessary to use a small container for work.
• This composition, despite the high degree of toxicity, has a strong aroma, which is why it can provoke poisoning.
• This type of finishing material can only be used for certain coatings (for example, for metal work, the composition will not "open up", that is, it will not give the expected effect).

It is also worth considering that the substance must be thoroughly mixed before direct application, otherwise it will not be possible to achieve the required effect. When applied, each layer should be perfectly absorbed and dry before further finishing, otherwise the positive effect will not be enough.

Selection of tools for work

This version of the wall surface coating can be applied using different means.Here you should approach the selection of the tool accordingly, and consider some points that relate to this:

• Work can be carried out only with a brush with natural bristles, but then consumption may increase.
• The best application is a natural paint roller.

• You can also use a sprayer with a pumping station, but experts advise applying only the final layer of the primer using such a device.

Do not forget that the consumption of the primer will directly depend on the selected type of tool, as well as the duration of drying of the composition on the surface and the rest of the drying time. Here it should be emphasized that when using a brush, the layers will turn out to be much thicker, and this is not always acceptable when working with large surfaces (areas). In order to correctly choose such an element, and even make a better coating, it is recommended to take into account all the tips from the masters, as well as comments from the manufacturers.

Recommendations and tips

As mentioned above, when working with a strengthening primer, you should adhere to a number of recommendations from professionals, and we invite you to consider the most Significant advice from the primer specialist:

• A medium-sized, natural material roller is the best choice for applying the primer.

• It is best to apply the primer mixture in several layers, depending on the structure of the wall covering (2 to 4 layers maximum).
• When performing work, it is worth using not only a respirator, but also a protective suit so that the product does not get on the skin.
• This type of primer must be mixed thoroughly, otherwise full penetration will not occur.
• This type of primer is available from a large number of companies, but only those in high demand should be selected.

Adhering to the advice, you can rationally select for yourself the options for the material for covering and protecting the surface of the walls, and you will not encounter many unpleasant moments during application.

Special attention should be paid to spraying the primer at a low level of humidity and normal temperature, which will facilitate rapid drying.

The pros and cons of the primer mixture

This type of composition will have many advantages and several disadvantages. We propose to consider in more detail the significant positive points that are characteristic of such a primer:

1. So, for the beginning should highlight the improved degree of adhesion and the possibility of using it with any wall coverings (universal composition).
2. Additionally, it is fashionable to allocate a relatively low cost at a sufficiently high indicator.
3. Moreover, there is a relatively low degree of toxicity compared with formulations of similar function.

4. In addition, to all of the above, you can add a quick drying of this method of surface treatment.

Despite the many positive qualities, there are certain disadvantages. This is the need to select a good working tool, a strong and pungent aroma of the substance, as well as a limited temperature regime for work. This arrangement is perfect for streets and interiors, but with a high degree of humidity, it will not penetrate well into the wall structure.

Review of the best manufacturers

The creation of such compositions as a strengthening primer of deep penetration is carried out by different manufacturers, but against the general background such brands like:

• VGT Company.

• German manufacturer Cerisite.
• Tikurilla is an excellent choice.
• Quite good domestic brands "Yarko" and "PRESTIGE".
• KUDO manufacturer completes the top five.

Not all manufacturers are represented here, but the options listed above are in great demand at the moment.