The article will focus on installing basement siding with your own hands and step-by-step instructions, after reading the step-by-step instructions, you can easily you can repeat this with your home.
When you want to quickly and inexpensively update the facade of your house, pay attention to such a finishing material as basement siding.
The genius of this building material is that for an affordable price and in the shortest possible time you get a high-quality imitation of expensive decorative elements.
And the process of installing siding panels is so simple that even a teenager can do it.
Facade finishing works give the building a complete and complete image. Competent work can turn any old shack into a civilized modern building.
Basement siding are cladding panels made of polymer material or thin metal.
Most often, manufacturers supplement their structure with resins, modifiers, plasticizers and other components to improve technical characteristics.
If the foundation of the house does not fit into the overall design of the structure, it can be closed with siding, especially since the modern market offers this material of any color and any texture.
And in order to save money, you can install the basement siding with your own hands. You just have to follow the description or video tips. We will try to deal with each stage of the process below.
Most often, finishing with siding panels is chosen for their significant advantages:
Interesting! The main difference between basement panels and conventional facade panels is their thickness, increased strength and wear-resistant characteristics.
For lining the plinth, pay attention to:
The most popular are panels that imitate cladding with stone or brick .
Their well-known manufacturers:
Metal siding produced by:
Vinyl siding popular from:
Metal siding consists of six layers:
Everything that used for installation:
To calculate the required number of panels, the perimeter of the surface to be trimmed is measured.
Then this value is divided by the squaring of the panel in the pack.
Thus, it will become clear how many packs need to be purchased.
But in fact, it is better to take siding with a margin.
For fastening the siding, it is not necessary to prepare the surface to be decorated, the main thing is that there are no obstacles to fastening.
As a rule, the finishing material is fixed to the battens.
It can be carried out horizontally or vertically, made of metal or wooden planks.
With a vertical crate, the step should be 91 cm, with a horizontal one, 46 cm.
It is not recommended to use wooden battens for the pile base, as they are more susceptible to rot .
When installing the lathing, be sure to use a level, and do not forget about the presence of electrical wiring, ventilation holes.
In the process of attaching the siding, it is possible to lay insulating material in the grooves and increase the thermal insulation of the house, therefore for these purposes, it is necessary to provide a sufficient distance from the frame to the wall.
The lathing begins to erect from the ground at a distance of about 5-10 cm from the ground. And if there is a high-quality blind area around the building, the gap may not be made. The frame should be in the form of squares measuring 50x50 cm.
Using siding, you can give an unusual shape to the corners of the building.
The starting strip is set strictly according to the level.
The siding installation process itself consists in the sequential drawing of panels into special profile grooves and fixing them with self-tapping screws.
To save material, it is possible to use cut pieces of the panel.
Insert the first panel into the starter strip and slide into the groove on the corner piece. The level of the beginning of the structure is checked and fixed to the crate in several places. The actions are repeated until the entire canvas is collected. Before the start of the last row, a finish bar is set.
Important! Do not drive the screws tightly. It is better if its head rises 1 mm above the panel.
When joining the siding panels, you must carefully monitor that there are no gaps between them.
Control over excessive tension of siding elements at the moment of fastening will help to prevent the panels from bulging and reshaping in the future.
The installation process starts from the bottom.
In the case of fixing the trim under the window sill or cornice, first install several finishing rails, and then proceed with the panels.
Various openings for pipes or ventilation in siding are made with a 6mm allowance.
Internal and external corners, various modules and small details will help to give the complete look of the whole structure.
Externally, with the help of siding, the house can be changed beyond recognition. Equip with various design gadgets.
For example, stucco or carved overlays. Siding provides a wide scope for design activities.
And what is important for performers, there is no need to bother with surface preparation. There is no need to remove old paint, tear off boring casing or cover with some special compounds.
Just choose the style you want and get to work.
The simplicity of the technology allows the real "teapot" to perform the work in the installation work. All that is required from you is a small insight into the process and the execution of monotonous, but neat actions.
Siding is much easier to care for than natural material. It is advised to wash the coating regularly, to clean the adhesion of dirt with a brush in the direction from top to bottom. It is allowed to add detergents to the water.
To remove mold stains, you can use simple bleach or a special vinyl cleaner.
( 1 grade, average 5 of 5 )
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |01, Nov 2020
Posted By: Work Style |09, Nov 2020
Posted By: Work Style |06, Nov 2020
Posted By: Work Style |10, Nov 2020