How to close pipes in the toilet with plastic panels and other methods
The area in the toilet is limited, and the congestion various communications can weigh down an already small space. Moreover, even beautiful tiles will be lost against the background of pipes, and most housewives prefer to hide ugly elements out of sight.
The assortment of various building materials makes it possible to select options for any wallet, and further it will be considered how to close the pipes in the toilet with plastic panels and other materials.
A toilet is a room with a specific microclimate. It is for this reason that material should be chosen before hiding the pipes in the toilet.
It must meet the following criteria:
Access to meters and ball valves is constantly required. To do this, you will need to install special hatches, since the fragile structure will not withstand pressure.
Next, we propose to consider the instructions for using plastic panels for closing pipes.
In fact, hide plastic pipes behind the panels will not be difficult, and the process itself will not take much time, but the appearance of the room can radically change. It's not a secret for anyone that sewer pipes and water pipes are not some kind of decoration, and against the background of a beautiful tiled coating, they look like a foreign object, which will significantly spoil the overall interior. This may be the reason that most people begin to sheathe pipes with different materials, among which plastic panels are the most popular. The drain and water supply network can be made inconspicuous in several ways.
The most common is a false wall. There are other, more complex options, and one of them will be the grooves that are laid in the wall. Another way is roller shutters. Quite often, plastic or drywall is used to sew up pipes. At the same time, experts identified plastic as a more practical material, because it can be easily removed from the frame during repair work.
Another advantage is that it is resistant to moisture, that is, it is not at all afraid of it.
Add the following to the listed advantages:
Panels are made of polyvinyl chloride, therefore they are also called clapboard or PVC panels. In cross section, they differ in their cellular structure. As a rule, the thickness of the lining is no more than 1 hour.
The width can be different - from 0.15 to 0.5 meters. The standard length is 3 meters, and the most common size is from 20 to 38 cm. The huge range of colors makes it easy to make a choice for a specific solution.
Please note, that moldings of different shapes should be used to decorate the place of fixing the lining around the perimeter or in the joint area and the corner part. They need to be painted white, and then everything will be ideally combined with various color schemes.
In order to close the pipes in the toilet with plastic panels, you do not need a lot of tools, a standard kit for wood and metal finishing will be enough. By heating, the panels can be shaped into almost any shape, and they will be perfectly glued and welded. They can be used to sew up walls at any angle of inclination.
If the box is made and sheathed correctly, then no one will notice the presence of a pipeline in the room.
Please note, that, as mentioned above, a wooden beam for a room such as a toilet or a bathroom will not be a good choice. Since the room is humid, this will have a negative effect on the tree, and even with the help of protective solutions it will not be possible to achieve the required level of protection.
Modern production offers various profiles made of galvanized steel and fasteners to them. To hide pipes in a bathroom or toilet, you will need to use a special profile.
Its standard length is 3 to 4 meters. The transverse dimensions are 2 * 2 cm, but there are also more.
Features of work
Although at first it may seem that it is not difficult to close pipes with plastic clapboard, but not all people have a clear idea of work ...
The pipes will not take up much space, and the dimensions of the structure that will be hidden will depend on where the pipeline is. It so happens that the riser is located in the very corner, and sometimes in the middle. The layout, which is made horizontally, is most often located close to the floor surface.
When the materials are thought out, take care of the various building materials as well as the tools.
For cladding, you need:
Important! Before starting work, we advise you to sketch a small sketch in which all dimensions of the hiding structure will be marked, and even at this stage, decide on the material for fixing the lining.
It should be noted that in such a situation glue will not be the best option, since the need to dismantle the building may appear at any moment. From this point of view, it is more profitable to use self-tapping screws.
Using plastic panels
Before you start covering the pipes in the toilet with plastic panels, you will need to construct a false wall. Instructions for arrangement are as follows:
5 meters, install profiles that are located transversely, since otherwise the building will not be rigid.
The process is described in more detail in the video, so that even a novice master can cope with the task. Carefully study the information provided, and then you can not only close the ugly pipeline, but also make a beautiful decoration for the room.
Features of marking
First, the contour is applied to the floor.
How correctly the angles are observed should be checked with a square. After the strength check has been performed, the contour can be transferred to the ceiling. Install the rack profile on the corners of the box.Its vertical position should be checked using a building level, and at the same time it is required to put a point on the ceiling surface in order to get a projection of the contour made on the floor.
Please note, that for exact alignment of the marks on the floor and ceiling, check how precisely the floor is horizontally positioned before marking.
How to install the frame
To be able to sew pipes with plastic panels in the toilet, you cannot do without building a base. A similar design is required not only when working with clapboard, but also for cladding with other materials. We note right away that the most suitable fastener for plastic lining will be a galvanized metal profile. It will provide the required stiffness, and its protective treatment will save the metal from corrosion. Most to close the pipes in the toilet with plastic panels, take standard wooden blocks as the main material.
But this option is considered excellent, because the wood should be treated with antiseptics. Also, in this version, fire safety becomes many times worse.
To close the pipes, prepare the plastic sheathing. In this version, the panels should be mounted using special clips, but such a frame has a huge drawback, since it has a low level of rigidity. During work, observe the size of the gap between the frame ribs.
When plastic panels are located panels from bottom to top, and then the distance will be from 0.6 to 0.8 meters. When they are located transversely, there may be a need to install an additional rack.
Please note, that we must not forget about the fact that after the revision and fittings, a window will need to be installed.
It will be needed to access the system, and its location should be better thought out during the construction of the frame.
To cover the sewer pipes, reinforce the panels on the base. A starting molding should be installed against the wall. It is attached to the profile with self-tapping screws, and such fasteners will be carried out through the shelf, which is covered by the next plate. It turns out that the screw cap will not be noticeable on the plastic sheathing.
The protruding part of the next plate should be placed in the groove of the last one and pushed in until it stops. Fix the free part of the panel with self-tapping screws, and according to this principle it will be possible to sheathe each wall at the base.
Install a molding to the outer corner, and the joints of the structure with the floor and ceiling can be finished using the same principle. Do not forget that the frame should not be closed "tightly". In the upper side of the structure, make a hole for ventilation with a diameter of at least 5 cm.
This problem can be considered settled.
You can also disguise the sewer with a plastic box.This is one of the most popular concealment methods. The process includes the following stages:
It can be located on all walls where the box will be installed, or only in those places where communications will pass. It is made from wooden blocks or metal profiles.
Small nails are enough as fasteners, and small cracks remain at the corners and joints. Hide them with inserts or a decorative strip.
Please note, that it is impractical to cut the hatch out of plastic, and it is better to purchase a ready-made one. It will be visible, so it should look pretty. A large enough model will give full access to all the devices that will be placed inside the box.
You can close the pipes in the toilet with plastic panels, or you can use PVC panels, as this is no less popular method ... In addition, the material is inexpensive, and the colors are varied in order to harmoniously fit into the interior of the room.
The panels are popular due to the following characteristics:
If we compare the material with other similar ones, then removing the sewer pipe into a PVC box will cost several times cheaper.
And this material will require additional finishing, and here you can not limit the flight of imagination. Otherwise, drywall has excellent characteristics, since it is easy for them to hide the wiring, it is easy to dismantle and mount it. Plumbing hatch insertion is very simple. The material is environmentally friendly, fireproof and moisture resistant. For further decoration, tiles are required, and this is the easiest way to close the riser.
The tiles will be easy to keep clean.
Several types of boxes can be made of drywall sheets, and each option has its own installation features. So, a blank wall can be used for communications that are behind the toilet. To cover the area, the sheets are installed around the entire perimeter of the opening.For a start, the frame is attached to the screws and dowels, and then the crate, and the final stage will be the installation of drywall sheets.
A square GKL box is used in a toilet, where communications are in the corner or occupy the wall, but partially. To hide the wiring, the metal profile is attached to the floor, ceiling and walls. Further, the vertical guides are installed, and before installing the door, a window is made from a metal profile. At the end, the toilet system can be covered with a sheet of plasterboard.
Fix the awnings along them. You can install profiles on them, and the embedding should start from the floor, slowly move up to the ceiling and walls. The next step is to install the remote profile. Attach canopies and profiles with self-tapping screws.
Attach the sheets to the profile strips, and fix with self-tapping screws every 0.2 meters.
And consider another option.
A fairly practical way to close the pipes in the toilet with plastic panels, but already in the form of roller shutters or blinds. But he also has not only advantages, but also disadvantages. Below we will consider everything in more detail.
Many pipes in the sanitary facility are masked with horizontal or vertical blinds.
They will be like curtains that can easily cover a non-aesthetic look from prying eyes. When required, simply roll them up and you will be ready to access the pipes. The main advantages include:
Now let's talk about roller shutters.
Closing an ugly area in this way will be much more convenient, and the design is more reliable and stronger.
But roller shutters take up more space than blinds, although automatic systems deserve special attention. It will be easy to close an ugly area; in general, the use is simple. They also come with a remote control. It will be more expensive to hide the pipe in this way, it will take more time, any drawings can be applied to the panel, and everything is done by photo printing. Hide household small things behind the panel.
Important! There are also some disadvantages, as the roller shutters in the set have a special frame. It should be installed around the perimeter of the opening and ventilation will be required for the pipes. For this reason, the structure will not reach the ceiling, which means that it will not be possible to close it completely.
Other materials will be needed for the top finish and different lifting features will need to be considered. Likewise with the bottom.
Due to the plumbing, the roller shutters will not be able to lower completely, and in order to hide the lower section, you will need to use the second part of the canvas.
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |12, Nov 2020