How to close the corrugation from the hood in the kitchen - proven methods

How to close the corrugation from the hood in the kitchen - proven methods How and how to close the corrugation from the hood in the kitchen + photo

Thinking about how to close the corrugation from the hood in the kitchen, we are considering all sorts of options for masking the structure - hiding an unsightly air duct with suspended ceilings or creating a beautiful box along the entire length of the channel.

We suggest considering all options.

Types of hoods and design features

Kitchen equipment for hood and air exchange can be divided into two types:

  • Circulating exhaust systems - air masses are cleaned by means of grease and charcoal filters, and then the air is returned back to the room.
  • Flow hoods - air flows are removed from the room into the ventilation shaft using a special air vent.

Each of the species has its advantages and disadvantages, which we will consider further.

Circulating types of exhaust systems

The working process of the circulating system does not provide for an air outlet in it. The polluted air is thoroughly filtered with the help of grease and carbon complexes (filters), and then returns back in a purified form. The demand for an exhaust circulation system for arranging a kitchen space is due to a large number of competitive advantages,

among which we highlight the following:

But among the disadvantages of using circulating-type devices, the following is worth highlighting:

  • The equipment will be sold only in the expensive segment, economy options simply do not exist.
  • Filters will need to be replaced from time to time, and this will incur additional costs.
  • Relatively difficult care and maintenance.

In addition, due to its own ergonomics, the design will perfectly fit into the interior and be in harmony with the kitchen set, as well as other pieces of furniture; problems with a violation of kitchen aesthetics will still be excluded.

Flow hoods

The principle of operation of this type of device is to completely remove air contaminated with fat and other air from the kitchen room through ventilation channel.

Flow-through types of hoods must necessarily be connected with a ventilation shaft using an air vent. The sleeve should be made of plastic pipes, and the corrugations of aluminum or galvanized steel.In order to understand how to successfully disguise the exhaust system and its components in the kitchen, we suggest that you familiarize yourself with the collection of photos of ready-made solutions selected by designers.

How to close the corrugation in the kitchen? To begin with, consider the fact that sometimes pipes are also used instead of corrugations. It can be noted that plastic pipes for ventilation can be of round and rectangular cross-section.

The second design option will easily fit into the design of the headset in the kitchen, and there will also be no difficulties with surface finishing to match the overall style of the interior. At the same time, an air duct made of LDPE with a circular cross-section provides a low level of resistance, and this will give a high efficiency of intake of polluted air.

The plastic sleeve has many competitive advantages that it would be dishonest not to tell about:

  • The relatively low cost of the material - the presence of a huge assortment of connection elements makes it possible to create an air exhaust duct with any configuration.
  • When using plastic air outlets, the noise level will be several times lower than when using metal corrugations.

When planning an exhaust system using PVC pipes, it is imperative to make all the necessary calculations, taking into account the complexity of the circuit.

The good thing about the corrugations is that they are very easy to install - one end of the corrugation made of aluminum should be fixed to the hood, and the other should be connected to the entrance to the ventilation shaft on the wall. The system will include a variety of adapters, and bolted clamps can be used as an attachment element. Galvanized pipes, as an alternative to the aluminum sleeve, have a perfectly smooth surface and are also resistant to corrosion.

Such equipment is in great demand as an effective and very affordable option for air exhaust, but it is worth disguising the corrugation from the hood in the kitchen space, because outwardly it is completely unpresentable and will significantly reduce the aesthetics of the interior.

TOP-5 options for disguising the exhaust pipe

During installation work for the flow hood, it is imperative to provide several options for how exactly you will hide the air outlet so that a pipe or corrugation made of aluminum did not spoil the impression of the overall style of the kitchen.

The sleeve can be decorated with all kinds of materials and technologies.

There are a number of requirements for camouflage designs:

  • Presentable appearance and aesthetics.
  • Resistance to temperature conditions.
  • Resistant to moisture.
  • Resistance to chemical influences, as well as to ultraviolet rays.

  • Ease of service and maintenance.

When working on the task of how to hide the corrugation of the hood from prying eyes in the kitchen, be sure to take into account the fact that masking elements are also needed in order to reduce the noise from the electric motor of the direct equipment.

Box made of plastic

How to close the corrugation from the hood in the kitchen - proven methods Easiest will hide the air vent in the kitchen room using a box made of plastic, especially if the distance between the entrance to the ventilation shaft and the hood is no more than 3 meters. You can see for yourself that there is an incredibly large assortment of relevant products on the specialized market, and the cost will vary in the available segment. The structure will be easily hidden - the plastic boxes are produced ready-made, and there will be no need to waste precious time on assembling the structure.

Gypsum plasterboard box

Such a solution is ideal for almost every type of interior and will attract the variability of execution. The plasterboard box is usually placed strictly vertically with attachment to the wall surface or create a horizontal type structure in the space between the upper perimeter of the headset in the kitchen and the ceiling surface. So that the unity of the style solution in the interior is not disturbed, the surface of the box is even trimmed with the same materials as the kitchen.

Built-in headset

In order to hide the ugly corrugation from the hood inside the headset in the kitchen, it is imperative to provide hanging cabinets with special holes in the furniture composition project for communications. The sleeve will take up very little space inside the module, and the main space will be used for its intended purpose as part of the storage system for kitchen utensils.

Decorating

A very inexpensive way to mask the chimney is to paint it. To do this, it is worth choosing colors in the style palette of the kitchen area. Decorating the air duct with dyeing compounds will be a priority for those people who do not want to spend a lot on consumables for arranging exhaust equipment.

Stretch ceilings

Systems with stretch and suspended ceilings are also quite in demand as structures that hide the chimney in the kitchen space. Panel and tile solutions will be relatively inexpensive, and more often than not, all work can be done without the help of specialists.

If it is necessary to carry out repair work for communications and scheduled maintenance inside the suspension system, it will be necessary to dismantle the selected sector of the surface, and after all the measures, it will be possible to insert the panels back into place. To install a stretch ceiling, you need professional equipment, and this can significantly affect the final cost of work.Moreover, to access the duct, which will be reliably hidden from everyone under the stretch ceiling system, you will need to remove the cover, which is also fraught with additional costs.

Do-it-yourself masking of pipes or corrugations using drywall

So, now you know how to close the corrugation from the hood in the kitchen, but for now not sure how to do it. To implement the idea with a drywall box, you will need sheets of material.

The work is carried out using tools that are in the home arsenal. In order for the rule to be able to organize the process of masking the pipes of the exhaust system by means of drywall, all calculations should be made, and on their basis you can buy all the materials.

Materials and fixtures

To be able to hide the air duct under the GKL box, you will need the following:

  • Electric tools - hammer drill, drill, screwdriver and jigsaw.
  • Building level, marker and tape measure.
  • Special scissors for metal.

  • Hardware - dowels, self-tapping screws, clamps, fixing screws.
  • Metal profiles for framing - intermediate and guide parts.
  • Drywall.

In addition, you need to prepare finishing materials for the box, which will hide the corrugation in the kitchen.

Stages of work on masking work with drywall

At the stage of preparation, measurements are taken and a draft of the future structure is created, and the main work are carried out in the following order:

  1. Marking - n Using a digital level, you should mark vertical and horizontal lines along the surface of the ceiling and walls.

  2. Installation of profiles - p About the indicated lines, you should attach the guides to the dowels, and then you can attach vertical elements to the profiles to the profiles.
  3. Installing the corrugation - the sleeve must be installed inside the frame, and then connected to the exhaust system and the ventilation shaft.

After that, it remains the case for the installation of drywall. the frame must be sheathed using blanks for self-tapping screws, and the joints must be sealed with a special hermetic composition or mortar.

Finishing work

The plasterboard box should be decorated in accordance with the general style of the kitchen interior.

The surface can be plastered or plastered, painted in a range that is "consonant" with the headset, pasted over with wallpaper, or come up with other options for finishing.

Popular mistakes

Among the most common mistakes when installing corrugations or plastic air ducts, the wrong choice of structural elements can be noted. It is important that the cross-section at the sleeve exactly matches the size of the outlet of the purifier. In addition, we note that the corrugation should be installed as stretched as possible, and there should be no sharp bends in the channel.

( 1 grade, average 1 of 5 )

.