It's no secret that when building a house we have to overcome several steps. We fill the foundation, erect the box, build the roof, do the interior decoration and so on. Therefore, each stage of construction must be considered separately and in detail. In this article we will show you how to decorate the facade of a building.
Now there is an immense variety of different finishing materials on the market.
Their choice should be taken very seriously, because a properly selected and executed finish can hide design flaws, geometric deviations, well, and it will just please the eye. For finishing the facade, we can recommend materials such as: porcelain stoneware, clinker tiles , stone - both natural and artificial, siding and blockhouse .
Often when decorating the facade, for example, cottages use plastering with further painting . Such a finish is best suited for gas silicate buildings, cinder block buildings, foam blocks, etc. The plaster must be applied to a previously prepared base or using a reinforced mesh.
The mesh prevents the plaster from cracking, so it is best to use it.
A layer of plaster can be made smooth or decorated, with an interesting texture, for which you can purchase various rollers and stamps. You can refer to the so-called "wet plasters". With such a composition, the surface of your plaster will immediately be rough and will not require additional painting due to various decorative impregnations and color pigments.
This type of facade wall decoration is perfectly combined with another - stone trim.
In this case, the stone should be applied in fragments, for example, at the corners of the building or by laying out some kind of pattern. Fragments of stone will also look great when finishing the basement.
The whole house can be finished with natural stone. To do this, you need to lay the stone on the cement mortar. How long and laborious it will be, just as long such a finish will delight your eye.
Fill the resulting "seams" with special jointing, which is usually sold with the material.
Read the instructions carefully before preparing the grout.
You can also finish the facade of the house, for example, clinker tiles , which will also be a good option. It will save your facade from temperature extremes and atmospheric influences. Clinker tiles have a wide range of shades and textures, and most importantly, they are made from natural ingredients.
There are also clinker panels , with their help you can not only perfectly finish the facade, but also thoroughly insulate it.
A durable material that is resistant to chemical and atmospheric pressure is porcelain stoneware or artificial granite. This material can be trimmed at any time of the year. Thanks to its natural ventilation, condensation will not collect, this will prevent the appearance of mold and mildew. It will reduce thermal conductivity in the cold season and prevent the building from getting too hot in hot weather.
Porcelain stoneware is mounted on a corrosion-resistant metal profile, and a layer of insulation is laid between the profile and the plates.
You can decorate your facade with a facade board or otherwise - a blockhouse. Usually this type of cladding is used for finishing the facades of wooden houses, but it is also suitable for foam block buildings.
The blockhouse is made of sustainable timber and can significantly extend the life of a residential building.
This environmentally friendly natural wood cladding will delight the eye for a long time with its pronounced wooden structure.
In addition, various impregnations are provided for this finish, thanks to which the wood will last twice as long and acquire the desired shade.
Allow wood to air dry before decorating the house - this will take several days.
Treat the wood with an antiseptic, and then cover with a primer and clear varnish. Then sand the wood and add the desired shade or color.
The cheapest wood material will be lining .
Best of all, it is suitable for finishing the facade of a summer house or a bath.
Affordable finish the facade with siding .
There is a huge palette of colors for every taste.
You can get siding that looks like brick or wood, and it's also easy to install.
It is best to mount siding already on top of a layer of insulation, and in itself it is an excellent material for waterproofing your home.
And so, we have considered several materials most suitable for finishing the facade of a house, but which one is better?
In fact, the question is formulated incorrectly. The choice of finishing material should depend solely on the style of your home and your material base. All the materials presented in this article have proven themselves perfectly in millions of cases. The choice is yours. Enjoy your construction!
( 1 grade, average 5 of 5 )
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |09, Nov 2020
Posted By: Work Style |06, Nov 2020
Posted By: Work Style |01, Nov 2020
Posted By: Work Style |03, Nov 2020