How to fix broken linoleum

How to fix broken linoleum How to glue torn linoleum quickly and invisibly

Despite the high performance parameters of a floor material such as linoleum, there are situations when it is damaged. Quite often, such troubles are mechanical in nature - cracks, scuffs and tears. But you should not rush to 100% replacement of the material, there are methods to eliminate them. In order to discreetly seal the torn linoleum, you need to consider the best ways to remove damage and prepare all the tools.

What to do if your linoleum is torn?

PVC flooring material and rolled natural covering won incredible popularity due to excellent decorative qualities and excellent resistance to abrasion loads and compression.

But if violations were made during the laying process, then during application the probability of its damage increases. Moreover, in a large number of cases, the root cause of unpleasant situations with a floor covering was its wrong choice.

To save money, buyers make a choice in favor of budget materials - household or semi-commercial roll material of series No. 21 ..

. No. 23 and 31 classes of resistance to wear. A high degree of resistance to abrasion is observed in PVC and natural roll linoleum. There are products for which sharp heels, pet claws and even furniture casters are not scary.

Spoiled linoleum not only impairs the aesthetics of the floor, but also becomes a special place for the vital activity of pathogenic microscopic organisms. If, for example, linoleum was bought for a corridor floor or in a kitchen room, which does not correspond to the load class, with marking number 21, then it will very soon become unusable from heavy use.

Such consequences will be when used in educational institutions of material 21-22 class of resistance to wear. Such material for household use has a minimum protective coating. Here it is best to use material of class 31 or better for flooring.

Often, when damage appears on linoleum, consumers are guilty of the manufacturers of roll-type coatings, so that their products are of poor quality.

In addition to choosing the right floor material, you should also adhere to its laying technology. Among the advantages of linoleum, it is distinguished by its partial suitability for repair. In the presence of small flaws in the form of a swelling, a cut, it is possible, through the use of appropriate means, to beautifully close the hole in the linoleum.

Please note that if you do not carry out repair work to eliminate various types of damage on the surface of linoleum, then afterwards they will only become larger and become a place for accumulation of debris and dirt.

In such conditions, fungal colonies will begin to multiply at an incredible speed, and it is unlikely that it will be possible to fix torn linoleum without consequences.

Details

How to repair a hole in the floor

To restore a floor covering with large holes, pieces of the same material in the required size are needed. When buying, consultants often advise buying linoleum with a margin. To fix the patch or to do the joining of the canvases that have dispersed, you need to prepare another double-sided or simple glue, tape. Double-sided fabric-based adhesive tape helps you out when restoring your floor.

For the repair of roll-type coatings, I use special adhesives:

  1. Universal Bustilat - such an adhesive composition is suitable for repairing damage on PVC linoleum made on both felt and fabric bases. With it, you can do all the work perfectly if the floor is made of wood, plywood or concrete.
  2. PVA adhesive composition - using such a composition will be equally effective in order to close holes on linoleum, regardless of the presence of a base. It is also used for plank flooring, fiberboard sheets, chipboard and screeds.
  3. NomakŠ¾ll 208 - this type of glue is intended for repairing all PVC coatings, their base can be generally any (foamed, fabric, pile).

    It is also used for wood floors, concrete screed, plywood sheets, DSP and fiberboard).

  4. Adesilex is a two-component epoxy-polyurethane compound for PVC, rubber and natural coatings. The base can be both absorbent and not absorbent. This glue is used in a room with a high degree of humidity.
  5. Homakol - such a colorless composition can be attributed to the types of cold welding.

    It is designed to ensure the tightness of the bonding of PVC sheets. Homakol is especially relevant in order to remove small holes from linoleum, as well as punctures and cuts.

In order to imperceptibly restore the floor covering from small punctures, scratches, burn marks, we recommend using polymer versions of putty based on artificial materials - acrylic and latex. Mastic is also suitable for this.

Good advice! To match the color of the floor covering, you need to add small particles to it that are scraped off the linoleum.

You can also buy a ready-made product from mastic, components of a multi-colored type and a solvent for repairing roll flooring.

Tools and materials for repair

To repair torn linoleum, it is recommended to use the following set of materials and tools:

So, let's look at the termination methods.

Sealing of torn linoleum

In order for the repair work of linoleum with his own hands to have positive results, the damage remained almost invisible, it is required to select a competent approach to each type of flaw. Depending on the type of damage, one or another means, as well as recovery techniques, are used.

How to close up a small market in linoleum

To glue torn material at home, if the dimensions of the spot area are not more than 1 square cm, then it is required apply an adhesive mixture. Suitable for removing minor mechanical damage:

  1. How to fix broken linoleum Sealants, which are designed for working with wood surfaces. They are able to get rid of flaws, small abrasions.

  2. Mastics - there is a large assortment of shades on the market, and therefore it is not difficult to choose the option most similar to a certain coating.
  3. Cold welding based on PVC - it can be safely used to remove tears up to 0.2 cm thick.
  4. Nail polish - it is used as a finishing layer.

The algorithm for the restoration of linoleum provides for the following actions:

  • What to do if the linoleum is torn? Remove dust and debris from the damaged area.

  • Select a tinting shade similar to the material and add to the repair compound and carefully reposition until the desired shade is obtained.
  • Fill in the damage on the linoleum surface with this mass, smoothing and removing excess.

To seal small defects on the flooring, a homemade mixture will work effectively, which is prepared according to the following scheme:

  • Powdered rosin (1/2 kg) is required in advance melt in a porcelain container with steam.
  • Then cool to a temperature of +50 degrees and mix with alcohol (0.15 kg) and castor oil (0.

    1 kg).

  • Add the desired pigment following the manufacturer's directions. The shade should be as close as possible to a particular type of linoleum.

When using this mixture, there is an additional point that is important to consider - after perfect drying, the color will become slightly paler. If possible, before applying to the damaged area, it should be tried on a similar substrate.

How to close a hole with a patch

If the linoleum is torn, then it can be repaired with a patch. It is glued either over the total area or around the perimeter. Technique for performing repair work:

  1. Clean the surface of the coating from dust and dirt particles, take a piece of linoleum cut to fit the dimensions of the damaged area and lay it so that the lines of the drawing coincide.
  2. Fix the cover with tape.
  3. The patch must be removed to the side, and the cut out piece with damage must be removed.

  4. Reapply the patch to the area to be repaired, making sure the joints are tight and consistent with the main pattern. Then, using a small-notched trowel, apply the mastic to the base.
  5. Place the patch on the area to be treated and smooth it by hand, pressing well around the perimeter. For the best effect, use a roller by rolling it in each direction.
  6. Cold-weld seams.

To avoid displacement or deformation, you must not step on the patch or touch it until the glue dries. In order to carry out repair work efficiently, it is advised to lay plywood on it and press it down with a load for a couple of days. Under this pressure, the patch will stick better and faster, and the seams will be almost invisible.

https: // www. youtube.

com / watch? v = gbxDLt1cKCk

How to repair a torn hole without a patch

This method of repairing holes without applying patches is used if a piece of the cover will hang with a flap, but not fully ripped out. To reduce the consequences of tangible damage, it is required to straighten the torn piece. You can try with something heavy, leaving the material under pressure for 24 hours. Alternatively, you can use an iron, ironing the damaged area through gauze, folding it in 15 layers. It is required to eliminate damage on linoleum only after it is fully straightened.

Restoration instructions:

  1. Clean the floor from the dirt under the break.
  2. Apply adhesive composition (liquid nails) with a gun around the general perimeter of the problem area.
  3. When placing the damaged part on the adhesive, press down well with your hand. Roll in all directions with a roller.
  4. Remove excess adhesive with a damp cloth.

For perfect drying on freshly primed linoleum, it is not advised to walk, such a section of the floor should be protected. In this case, not only liquid nails are used, an adhesive composition for roll coatings and mastic are also suitable.

How to remove a cut from linoleum

You already know how to glue torn linoleum. To get rid of the cut, you need to adhere to the following recommendations:

  • Clean the base under the edges of the canvas from debris.
  • Prime and dry problem areas.

  • Place double-sided tape in the gap, from the beginning to the end of the cut.
  • Remove the protective film and press down on the edge of the floor covering, smooth everything with a roller.

There are situations when, after repair work, there are gaps of 0.2 cm between the edges of the material. They can be eliminated using A-type cold welding.

With this approach, the slots are almost invisible.

Conclusion

To imperceptibly glue the torn material for the floor is not an easy task, but with a competent approach, it can be done. The main thing is to comply with all repair technologies and apply effective methods. To reduce the likelihood of damage to the floor covering, it is required to correctly select its ideal wear resistance class, without violating the rules for laying.

.

Overview and interior ideas + Video
Overview and interior ideas + Video

Posted By: Work Style |02, Nov 2020

Compaction of Soil with Pneumatic Rammers: An Overview
Compaction of Soil with Pneumatic Rammers: An Overview

Posted By: Work Style |02, Nov 2020

Brick painting with paint - process features
Brick painting with paint - process features

Posted By: Work Style |10, Nov 2020