How to glue and what is better for an apartment and a house + Video

How to glue and what is better for an apartment and a house + Video In this article we will tell you about a new floor covering - PVC laminate, what it is, about its features and methods of installation in house.

What is PVC laminate

The popularity of MDF laminate as a floor covering has been known for a long time, but this material also has a number of significant drawbacks that narrow the scope of its application:

  1. How to glue and what is better for an apartment and a house + Video Low moisture resistance does not allow using this coating in rooms with high humidity (bathrooms, kitchens, verandah corridors, etc.) .d.);
  2. At low temperatures, ordinary laminate is subject to excessive deformation, which makes it unsuitable for use in unheated rooms (balconies, loggias, corridors, elevator platforms, etc.

    );

  3. Lack of sound-absorbing properties creates an uncomfortable environment in rooms with MDF laminate and is not recommended for children's rooms, hospital wards and other rooms;
  4. Rapid wear of the top layer of the coating when used in rooms with high traffic or local weight loads.

How to glue and what is better for an apartment and a house + Video All these problems were solved during the development of a new floor covering - PVC (polyvinyl chloride) laminate.

At the heart of the PVC laminate board is a thin vinyl plate, under which there is a stabilizing layer of fiberglass, which gives the coating additional rigidity and is responsible for absorbing noise.

How to glue and what is better for an apartment and a house + Video Above the vinyl layer there is a decorative layer imitating natural wood or stone structure.

On top of the slab is covered with a protective layer having a textured pattern corresponding to the structure of the simulated material.

Sometimes the protective layer is supplemented with an anti-slip coating.

The presence of quartz chips in the structure of the material makes laminate panels practically non-combustible.

Features and disadvantages of the material

How to glue and what is better for an apartment and a house + Video The PVC laminate boards themselves are a flexible canvas (thickness from 5 to 9 mm.), reminiscent of something in between ordinary laminate and linoleum.

Along the perimeter of the boards, they are equipped with grooves-locks, which have a rubber base and protect the base from moisture penetration.

How to glue and what is better for an apartment and a house + Video In addition to the locking variant of the connection, manufacturers of PVC laminate also offer adhesive and self-adhesive variants for its laying.

In the first case, laying is carried out on the adhesive solution applied to the base, in the second, a special adhesive solution has already been applied to the bottom of the panels, which fixes the laminate.

It should be noted that PVC laminate is the optimal floor covering for underfloor heating systems.

Like any product, PVC laminate has its drawbacks:

  • How to glue and what is better for an apartment and a house + Video Melting (but not burning) under the influence of high temperatures, emitting toxic smoke;
  • Requires additional insulation when installed in cold rooms;
  • Traces of interaction remain on the surface with rubber;
  • High, in relation to conventional laminate, cost.

Tips for installing PVC laminate

Requirements for the base for laying PVC laminate are standard - a clean horizontal surface with no significant cracks and no more than a difference in height 3 mm per square meter.

  1. How to glue and what is better for an apartment and a house + Video It is recommended to lay the laminate on a substrate, especially if it is mounted in an unheated room and additional insulation is required ... It is necessary to leave a thermal gap with a width of at least 5 mm at the edges.
  2. When installing laminate flooring, place the plates along the line of incident light rays to make the joint seams less visible.

  3. How to glue and what is better for an apartment and a house + Video Boards during installation should be positioned at an angle of 45 degrees relative to each other along the locks mating line. Once the locks are engaged, tap the inserted plank to minimize the gap between the laminate.
  4. The next row of laminate is recommended to be laid apart from the previous one, with an indent of one third of the length of the board. If necessary, cut off a part of the board, this can be quickly done with an ordinary clerical knife.
  5. How to glue and what is better for an apartment and a house + Video After finishing the installation, the laminate must be treated with a special roller and special mastic, which will help to additionally seal the coating locks.

This described technology is correct for the locking type of fastening of PVC laminate.

Adhesive and self-adhesive versions of the laminate are easier to install and all its features are indicated on the packaging.

When choosing PVC laminate in a building materials store, we recommend that you pay special attention to the products of the following manufacturers: Tarkett, FineFloor, Moduleo, AlpenFloor.

.