How to hide heating pipes in an apartment and a private house: we make it nice and warm ... You can make a wonderful renovation, order expensive custom-made furniture, hang unusual curtains, but all this beauty can be killed by plastic or steel heating risers . a similar problem is familiar to many people who make repairs, and how to hide the heating pipes is almost the main problem of most apartment owners.
Details are in this article.
There are actually many ways to cover heating pipes in an apartment or a private house, but the most radical is to hide everything completely, or you can simply decorate them with decorations. At the same time, for individual heating systems, heat is distributed between demands and radiators, and in apartments where central heating is installed, pipe insulation most often results in heat loss.
But there are good ways to avoid this problem:
It is aesthetically pleasing and also very convenient. To lay the line, it is required to make grooves, the pipes should be wrapped with heat-insulating material and laid in the made recess in the wall, and then everything is sealed or sewn up with drywall. all connections and valves should not be embedded in the wall - in case of a burst, it will be necessary to break everything. Yes, it is also impossible to insulate old pipes in this way.
The second method is to clean the pipeline in a drywall box on a metal box. It can be painted, wallpapered or plastered - this gives a wide range of options for decorating heating pipes. Alternatively, you can opt for perforated metal - this is the style and also has excellent heat output. It is also possible to hide the gas line under the finished plastic box. If you have made a choice in favor of plastic, you need it to be of good quality - some varieties of this material begin to turn yellow and swell from heating, so it is better to check the technical characteristics.
Remember the rules - the pipe must be at least 5 cm from the box walls, and you also need to provide access to fittings and taps.
It is required to paint heating elements only when they are cold - with the heating turned off, but with rapid heating, the paint may begin to crack.
At the same time, in living rooms the task will be more difficult, because radiators and risers are located on the wall where the window is installed, and there is no way to put a cabinet there.
So that there are no problems with heating, there is an option to create decorative gratings through which heat will enter the home. In this case, the screens must be removable.
Remember only that such a structure will reduce the space of the room, and some elements should still be freely available. For example, gas workers are extremely unhappy if people try to hide a gas pipe.
Sheet box drywall is the best option for those who want to hide the batteries themselves. It can be easily made by hand, and this does not require a lot of experience in construction. The materials and tools that are needed can be found easily at home improvement stores.
The following is required:
- Metal profile.
- Plasterboard sheets.
- Skirting board (should be of the same material that is already installed around the perimeter of the room, or vice versa, differ in style, but at the same time be in harmony).
- Self-tapping screws, dowels and screws for fastening to the wall - choose the type of fastener based on what material will be used.
- Finishing materials - primer mortar, putty and coating.
Taking into account the fact that the structure will be light and not burdened by anything, the use of an aluminum single profile is allowed, and in addition to the standard plinth, you can use different linings, plugs and rings.
Before starting work, it is required to measure the circumference of the tubes, calculate all the tolerances and make a drawing.
After that, you can start cutting the profile. If the distance between the posts is more than 25 cm, additional posts must be prepared. If the height is more than 1.5 meters, prepare horizontal lintels, and then proceed to cutting drywall.
A metal profile should be attached to the floor using self-tapping screws, and to the wall also using dowels, which create a sleeve for self-tapping screws.
At the moment, there are different types of dowels that are designed for use in plaster, concrete or brick walls. If the structure turned out to be very massive, then the guides need to be strengthened, and the crate should be created using transverse elements.
Sheets of drywall
It is not difficult to hide heating pipes in a drywall wall. To begin with, process the edges of the sheets with a planer and then screw the elements to the frame. The joints should be sealed with a putty mortar.
Next, cut out special windows opposite the places where the taps are located.
After the box is dry, the final finishing can begin. It should be putty, primed, and then apply the coating that you like - paste over the wallpaper, plaster or paint. Technical windows can be covered with plastic doors that match the color, or grilles that are easy to remove. Finally, a plinth or other decorative type overlays are required on the ceiling and floor.
Hiding behind plastic panels
In places where there are a lot of people (public institutions) or for a bathroom, it will be appropriate to use a plastic box. If the repair was carried out simultaneously with masking the pipes, then it is worth using the material that was selected for the walls. It is economical and also 100% copes with the masking task.
Fastening the frame
To fix the frame to the walls and floor, it is necessary to install metal or wooden bars (profiles) on which the plastic panels will be fixed. So it will turn out to make a crate, and it is desirable that its size is at least 4 * 4 cm.
After the frame is installed, you can proceed to paneling. Sheets of plastic that are cut to size should be screwed with special small nails or glued with adhesive. When everything is over, the joints with cut edges should be closed with special elements, and the product will look neat.
The joints of the plastic / plasterboard box with the ceiling or floor are the most vulnerable - you will not be able to cut the edge straight or fail the flooring. When laying the laminate, it is even advised to leave cutouts around the heating risers so that there is no deformation of the floor material when heated.
For this reason, it is best to use decorative overlays to hide such an unsightly place. Of the advantages, we single out the fact that this not only masks the joints, but also decorates the room, and there is also a practical benefit - you can remove them during cosmetic repairs or general cleaning, and then put them back in place.
As for the material of manufacture, it is best to opt for wood. The service life of wooden parts is 10 years, in contrast to their counterparts from MDF boards, which barely withstand 5 years of operation. The holes in the cover must exactly match the diameter of the pipes or the shape of the box, otherwise the whole point of the decoration will be lost.
You can consider the option with plastic overlays. Usually they are made of two parts, which can be separated, and after installation around the heating element, they must be snapped back. After the parts are installed, they should be glued to the ceiling or floor. Installation is simple and will take less than a minute, and the decor is easy to remove.
Old pipes should never be bricked up or sewn into a box, as there is a high risk of leakage.
Nevertheless, even in this case, you can show imagination and decorate your home, so you will definitely be able to hide the heating pipes in the room.
You can paint the elements of heating systems in the color of the walls, so that they merge with the main background, or you can choose a contrasting shade and make a large bright spot - the so-called dominant of the room style. In any case, the paint must be heat-resistant, non-toxic, so that no harmful vapors are released into the air when heated. For this, you can use alkyd and acrylic paints, as well as compositions of a water-dispersion type.
You can buy rope or jute rope, and this method looks stylish, emphasizes the image of the room, which is expressed in colonial or rustic style.
The main thing is that the material is able to withstand high temperatures, and then you can additionally decorate everything with paper flowers or other elements.
Another material for decoration is bamboo, and they should also be additionally decorated, for example, planting a small toy panda or exotic birds.
In the toilet or bathroom, there is usually a main transit pipe (a riser from the heating, through which water rises into the expansion tank or goes down, all depends on the type of wiring). In addition, the toilet may have a drain pipe.
To hide or decorate such ugly pipes, you can use the following methods:
- Build a special cabinet in the toilet, in which, in addition to shelves, there will be systems - a riser of water heating, a gas system (if the toilet is near the kitchen), as well as make an apartment water distribution and install meters.
- Installation of a plasterboard box. remember to use only moisture-resistant drywall, and if you plan to lay tiles on top, then the profile should be of a reinforced type - the structure with tiles is quite heavy.
- At the end, you can paint the pipes, and implement the most daring design solutions.
There are many interesting ideas for decorating pipes in the bathroom, and therefore it is not necessary to use the loft style if the pipes will create an ugly appearance.
Posted By: Work Style |02, Nov 2020
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |06, Nov 2020
Posted By: Work Style |11, Nov 2020