How to hide pipes in a bathroom without a frame? Best Ways + Videos

How to hide pipes in a bathroom without a frame? Best Ways + Videos The best ways to hide pipes in a bathroom without a frame. When the renovation work comes to an end, you want the bathroom design to be complete, so it's worth considering all the details in advance. Any ideas that are truly unique and original can be spoiled by the ugly appearance of utilities that were left in plain sight. To make the interior in the room look beautiful, people begin to think about how to hide plastic pipes in the bathroom, but without a frame that will eat up useful space.

In the article you will find a lot of useful materials on how to do this and how to add flavor.

Requirements for the materials used

Before starting the process of hiding pipes, you should select the material with which you will conduct this event. It will be wrong to choose products only for the aesthetic component, since the material must also have practical properties.

We suggest paying attention to the following characteristics:

  • How to hide pipes in a bathroom without a frame? Best Ways + Videos Low material weight. Since bathrooms are often small in size, the structure should not clutter up the area, so choose not massive materials.
  • Moisture resistance.

    The bathroom is exactly the place where the humidity level is high. The material with which the water pipes will be covered must be resistant to increased moisture, so choose only those materials that do not absorb moisture from the air and are not prone to deformation.

  • Resistance to chemicals. In order to maintain the sanitary condition of the room, household chemicals should be used regularly, therefore, the material for lining over pipes must be sure to withstand contact with such compounds. For this, an MDF plate, plastic panels, a moisture-resistant drywall sheet are perfect.

Also, to beautifully decorate the places where unsightly pipes are hidden, you can use decorative-type hardboard boards, which are covered with volumetric gypsum panels or melamine laminate. The first option differs in that it has a large number of textures that incredibly accurately imitate bricks, wood, mosaic patterns. They make it possible not only to cover the pipeline, but also to give the room a certain charm and originality. Ensure that the piping is in good condition before sheathing.

Please note, that if you close the defective pipes, then in the future this may lead to the need to disassemble the installed structure, and this will entail additional material and temporary waste.

In addition, there are three types of pipes to hide:

  • Hot / cold water supply.
  • Sewerage.
  • Heating system, towel dryer.

Not each of these types of communications can be easily hidden behind the decoration, even if such events are assumed due to the peculiarities of the layout of the premises. It can be difficult to arise in building codes, since it is they that do not allow to hide pipes under the plaster, which are connected with a lock or a surge coupling.

Metal pipes for supplying cold water, as well as cast-iron sewer blocks, often create condensation, and therefore pipes in a bathroom without a frame should be hidden so that it is in this area that there is at least a minimum air exchange that will circulate and prevent moisture from stagnating. It is important to take into account such features and after that, on their basis, select materials for work.

Ways of disguise

Designers have in their arsenal a lot of amazing ideas to disguise the plumbing in a sanitary facility. Style decisions can be radically different in functionality, shapes and types of material that will be used. There are several options for hiding pipes, but we will only cover those that do not require framing.

With them, you will be able to effectively hide ugly pipes and save usable space!


It is the blinds that are the best option to hide the pipes, and then it is time to leave them freely available. To use the valves or check the water meter readings, you just need to lift the curtain, and you will have full and quick access to all the necessary plumbing equipment. For bathrooms, it is best to opt for aluminum or plastic blinds. Such products have excellent moisture resistance, and they are also very popular, since they will not take up much space (already definitely less than the wall frame). They are often bought if the bathroom is small.

If the opening that needs to be repaired has a small opening width, which is not more than 50 cm, then a system with a lace mechanism will be required. If the span is wider, then it will be optimal to use a structure that has a spring structure. During the installation work of an automated system with electric curtain rods, the product will need to be placed in such a way that the motor is located in a sealed case. As supports, you can use sheets of drywall, a plastic box or a false wall.

There are two ways to install the blinds:

  • Place the box inside the wall.

  • Install the element outside.

The first option can be used if it is possible to equip the opening as a niche with a certain depth. The outdoor location should be used when the utility pipes are located next to the span. Uninterrupted operation of the structure will be 100% ensured if the opening has correct geometric lines. The indicator will be whether the horizontal and vertical planes are parallel.

Even if there is a slight misalignment, it can make it difficult to move the blinds on the rails. To avoid such a situation, level the walls so that it turns out to hide the sewer pipes in the bathroom with high quality and beautifully.

Installation of pipes into the wall

This method is the most difficult of all existing, and therefore it is considered radical. But with its help, you can not only hide communications, but even increase the area of ​​the room. Please note that when choosing this method, according to the rules from SNiP, you cannot perform slitting of a brick wall or thin partitions in panel houses.

In addition, there is an obvious drawback of the method - there will be no quick access to all pipes. If there is an accident or pipe leaks, it will not be possible to quickly stop the problem, and therefore everything should be worked out in detail to minimize the likelihood of a leak.

To do this, observe the following rules:

  • There should be no detachable connections in the walls.
  • We recommend using products and polypropylene for laying the pipeline.
  • Strobes should be fitted with thermoflex or foam sleeves.

    Such a solution will be able to save cold pipes from the appearance of condensation, and also make it possible for communications with a hot water supply to expand due to temperature effects.

We also offer some more simple ways to avoid problems and hide the pipeline system beautifully.

  1. How to hide pipes in a bathroom without a frame? Best Ways + Videos Mosaic - this option can be classified as exclusive, but the user will have access to a large selection of textures and shades, due to which you will have the opportunity to create individual designs. When choosing this method, it should be borne in mind that it is suitable only for decoration and only for wide pipes.
  2. Use of polyurethane tubes and moldings.

    This method is perfect for those who adore the aristocratic style. This lightweight material does not cause difficulties during installation, and a large assortment makes it possible to decorate a room in any direction. Stucco molding is a versatile product that can be simply removed if required. Many users use this material to hide vertical piping.

  3. Metal grill.

    Chrome plated can be a great decoration for a modern bathroom, as well as harmoniously look with all the elements of plumbing. The installation should be carried out on a metal frame, but in our case, it is possible on the pipes themselves.

  4. False Wall. The solution is invisible and elegant, with the help of it you can beautifully decorate pipes in the bathroom. So you will be able to hide even several pipes at the same time, and this has attracted many owners of houses and apartments.

    But with this method there will be less usable area!

To correctly hide the vertical pipes , you can use a cabinet.To do this, select a piece of furniture of the required size, fix the hinges and frames on the wall, make a hole under the pipe and on the bottom / top side of the product, and then fix the cabinet on the frame or hang it on the hinges. This gives you extra storage space for the care products and towels, and the pipe is hidden. To hide horizontal pipes, there is no other option than to create a box on the frame.

Tips to avoid mistakes

To hide water and sewer pipes in the bathroom, you should first familiarize yourself with the key points of the process .

.. Before performing installation work, you should consider the design of the future decor so that there is convenient access to the pipes. The water meter and threaded connection must be freely available. Knowing the rules can help you avoid mistakes and reduce installation time.

Experts advise using the following:

  • Make sure all communications are working properly. Most people forget that a slope must be provided for the sewer pipes.
  • If you are hiding water and sewer pipes, then make sure that there is easy access to the taps, and for this, make an inspection hatch in the box.
  • Threaded joints are the most susceptible to leaks in pipes, therefore it is important to assess the condition of the seals in advance and check the joints for leaks. After that, make plumbing hatches, which will make it possible to carry out repairs if a leak occurs.

  • Before closing the communications, decide how the household appliances will be located, because if you neglect this, then in the future there may be problems with how to bring new equipment.

Most mistakes can be avoided if quality materials are used for the work, and it is also important that everything is done accurately during the repair. Neglect of such rules can lead to the fact that leaks will be found in the future, due to which you will have to disassemble the entire structure and make expensive repairs.