How to make a crate for a gazebo

How to make a crate for a gazebo How to make a crate for a gazebo with your own hands

Lathing on walls or open-type openings in gazebos made from wood or metal rods. The work is carried out carefully to give the building a finished look, shade the interior space and improve the appearance. A wooden lathing for a gazebo will create a feeling of personal space, and also cover from prying eyes, but will retain the impression that you are in nature.

Cloth barriers cannot be a complete replacement because they impede the flow of air. Consider how to correctly make a crate for a gazebo.

Materials and tools

The lathing of wood will create a sense of seclusion with nature. Metal is used less often, because they make the structure heavier, and the gazebo begins to look cumbersome. Wood that has been processed with special means is durable and will create a feeling of lightness. Wood species have different properties, and may also differ in color and quality.

Main types of wood for veranda sheathing:

  1. How to make a crate for a gazebo Oak - material with high strength, which is treated with wood stain in order to give a beautiful shade.

    Experience is needed because it is difficult to handle.

  2. Larch is no less durable than oak, but much softer, easier to saw and grind. Such a tree is resistant to moisture.
  3. Beech - material with a pink tint is easy to process, but external finishing is needed, because it accumulates moisture inside and after a while begins to deteriorate.
  4. Conifers - spruce and pine contain resinous substances that are capable of repelling water.

    The wood will smell good.

  5. Ash - the breed has medium density, strong and heavy. It is not difficult to process it, but it will deteriorate from moisture.
  6. White alder, when freshly cut, quickly acquires a yellowish tint, and also obtains a uniform and beautiful shade up to orange color.

Decorative type crate is made and installed manually, no mechanisms are required.

Marking and cutting requires a tape measure, pencil, square, saw and chisel. Fasten the slats with self-tapping screws, nails or use an adhesive joint. In the working process, they are coated with varnishes, antiseptics, stain or paints.

How to make a lattice and attach it to the gazebo

Measurements

So, you need to start work with measuring openings, in which the grill is installed. Decorations are used on all surfaces of a building instead of walls, roofing or filling window squares.

The dimensions must be transferred to paper and a schematic drawing made. From the sketch, calculate the length of the thin bars and their number.

Decide on a mesh pattern, which can be:

  • With chaotically placed links of different shapes and sizes.
  • With diamond-shaped sections if the strips are installed diagonally.
  • With rectangular or square cells.

First, you need to make a frame for the new mesh. Before the start of construction work, lumber is impregnated with special compounds, and the joints are coated with carpentry glue. The right angles of the cells need to be checked with a square, and the docking places are attached with self-tapping screws or dowels. The last element is an attachment product in the form of a thin cylinder with rounded ends. Drill holes with a smaller diameter in advance until the screws are twisted so that the rail does not start cracking when installing the hardware.

Another option for strengthening would be the angular placement of the ends of the bar. By means of a miter box, the ends are cut off at 45 degrees, the elbows are connected, and also controlled. The joints need to be treated with an adhesive, and also fastened with nails. Nails are attached to the gazebo, and also wood screws. If the base is made of bricks, then dowels are used.

It is required to fix everything to the metal frame with self-tapping screws for metal (with a small thread).

Option for mounting rails in the window

How to make a crate for a gazebo with your own hands? Grilles must be installed in the opening at an angle of 45 degrees. Measure each strip in advance and cut it to the exact length for mounting to avoid overrun. The slats will be placed in the window opening so that all grid cells are in the same slope, and their sizes correspond to the adjacent links.

Step by step assembly:

  • How to make a crate for a gazebo Prepare templates in the form of strips with the same length for easy markup.

  • Reiki needs to be treated with an antiseptic, and they are still waiting for drying according to the time specified in the instructions.
  • The first strip must be attached to the window frame, keeping the angle along the protractor, and a couple of elements are also recruited along the width of the window opening.
  • Nails are required on the frame.
  • The top layer of the battens is attached over the first level, and the slats are fastened together.
  • In even openings, the rack ends are not covered with anything, and openings with protrusions or depressions on the frame are attached with decorative glazing beads, a finishing profile or plinth.

  • The assembled product needs to be varnished with exterior paint.

The ends of each plank must be cut immediately at 45 degrees, and after fixing the first plank, the rest are marked with an auxiliary template.

Please note that the nails must be selected in such a way that the tips of the hardware do not protrude on the opposite surface of the window frame. If this happens, nippers are used and the place needs to be treated with linseed oil so that the point does not become a focus of putrefactive development.

Slot-in-slot lattice option

This method can be classified as a professional technique, requiring the use of a hand-held milling device or the use of a circular saw.

Basic skills are required when marking grooves on the slats in order to pick up the body of the slats at the joints and insert the slats halfway into one another. The strips do not need to be applied, but recessed, due to the special processing of lumber. With this connection, the strips are located in a single plane and represent a one-piece structure. If you make a crate for a gazebo, a groove in a groove, then the strength of the product will increase, the lattice will resist wind gusts more strongly.

  1. Step-by-step instructions:

    1. Click on the first bar, and attach the second and mark the joint on a pair of strips.

    2. Remove the strips and work the marked places with a saw or router.
    3. Mark the remaining planks and cut out the fastening points.
    4. Glue the cross sections with adhesive.
    5. Install the slats into the frame, and additionally secure with small nails.
    6. The grille must be placed in the installation position.

    7. Open with stain (if required) and paint over with

    .

A grille that is joined in this way will have a refined and neat look. Such products are placed in one layer and do not make a second frame. The slats are made from boards with a thickness of 5 cm and a width of 10 to 12 cm, which they begin to dissolve on a sawmill. The material must be taken dry, or dried in the shade.

( 6 marks, average 4.33 of 5 )

.