The dream of many is to have their own home. Life outside the city, away from traffic jams and bustle, is wonderful. There are many pluses: it is calmness, space, and ecology. Moreover, such a house does not have to be in a remote village, there are many options in transport accessibility.
But all the positive aspects of living outside the city can be crossed out by everyday inconveniences.
Not everyone will accept the absence of a warm bath or shower. Without a full-fledged sink in the kitchen, you are not drawn to culinary feats. And washing by hand will not add optimism to anyone. Buckets of water are brought from the nearest well, which is heated for a long time to take a shower or wash the dishes. Already at this stage, many are making a decision to order a water supply project for a private house.
Or they look at examples, find out the cost of a private house water supply project.
The degree of comfort of life in a private house depends on the arrangement of the adjacent territories, external and internal planning, and, of course, on engineering communications ... This includes electricity, gas, heating, and water supply with sewerage.
Coziness and convenience depend on this. Plumbing in a private house is especially important. Due to the lack of such a blessing of civilization, living with pleasure outside the city may become impossible.
The project of water supply and sewerage of a private house is one of the first steps. One cannot do without it both in elite cottages and in ordinary country houses.
It calculates all the nuances of water supply.
In the project of water supply and sewerage of a private house, the price is of great importance. It is based on many indicators.
Before starting a water supply project in a private house, they examine the soil in the adjacent area to identify its features. If necessary, draw up a topographic map of the area.
Experts make calculations of the depth of groundwater. Water supply and discharge systems are closely related to each other.
Therefore, it is recommended to immediately order a project for both water supply and sewerage of a private house. It will immediately calculate the volumes of water supply and discharge.
A private house water supply project as an example will help you select systems with the required characteristics.
It is beneficial for a client to order a private house water supply project from professionals. With it, you can save on the purchase of materials. All costs have already been taken into account in the estimate, and unnecessary expensive stock will not remain.
The Volgograd private house water supply project provides for all the technical nuances, subtleties and specifications, which facilitates installation. The team of a specialist sees all the features of the object and understands how to simplify and reduce the cost of the installation process without affecting the quality.
The equipment will also be matched to individual characteristics. It will not turn out that the pumps do not fit the pipes, and the fasteners are needed of a different brand.
A well-designed project of water supply and heating of a private house will allow not to intersect or overlap with other engineering communications. This helps to avoid unexpected situations. This document takes into account absolutely all work and materials to the smallest detail.
There are several types of connection depending on the water source. The project of water supply of a private house from the central water supply system is feasible when it runs in close proximity around the perimeter of the territory.
It is necessary to contact the control organization in advance in order to obtain data on the water pressure. When connected, permission is obtained. Due to insufficient pressure, the water supply system may sometimes not function normally.
It is also necessary to study the indicators of the chemical composition of water, whether there are any harmful additives or too high a content of elements.
The convenience of such a connection lies in the fact that in case of problems with power supply, the flow of water into the house will not stop. Sometimes customers are not satisfied with the quality of the water and they decide on an autonomous connection.
If there are no highways along the boundaries of the site, then the system is mounted water supply in an autonomous way.
One of the options for the water source is a well.
If he is on the site, then equipping his water supply system is quite simple.
If it is not there, then consider the possibility of digging it up. Moreover, the cost of such works is relatively low.
The downside of such a water source is the limited volume. Usually it is calculated for 200 liters.
For a small family, this may be enough.
There is also sometimes a risk of mixing with groundwater, but this only happens in some areas and under certain conditions.
In this case, in case of failures in the supply of electricity, the well will still remain available. In emergency situations, water can be drawn manually into a container. And calmly wait for the appearance of electricity.
The service life of the well is about 50 years. Which is pretty long. This method is the most economically profitable, and if there are prerequisites for digging a well, then it is chosen.
When organizing water supply through a well, the question also arises with the reserve and depth of water.
Well drilling is much more expensive than digging a well.
Special equipment is often involved. The final cost depends on the depth of water occurrence, geodetic features and the type of well.
The quality of the liquid obtained is usually higher than that from the central water supply. The uninterrupted supply of water to the house depends on electricity. The project of external water supply of a private house can be downloaded for review even before drilling a well.
When drilling a well, several methods are used, the cost of which is calculated in the water supply project.
The depth of an artesian well can reach up to 150 meters, up to limestone rocks. The stock of raw materials is practically unlimited. This type of installation requires mandatory registration and payment of tax.
This is an expensive drilling method, it is used only in the absence of other options for laying water supply.
Moreover, the service life of such a source is, on average, twenty years.
The so-called sand drilling is not so deep. It is made manually to find the required depth.
Sometimes it takes several attempts to establish the occurrence of water. If you come across a shallow bed of water, then the depth of such drilling can be only 15-20 meters.
Usually, special equipment is not used in such cases.
It works to a given depth, while the aquifer can be much higher than a given point. There are different options for the location of the wells.
You can download the project of water supply and sewerage of a private house and imagine how this will be done in relation to your property.
There are several types of water supply projects.
Year-round and seasonal.
The latter is used only in summer.
If the summer system can be collapsible, then the year-round system is already capital, without the ability to disassemble it while maintaining its working capacity.
This includes the piping itself with the necessary accessories. Depending on the source, a variety of water supply systems.
Filtration and pressure control mechanisms. A variety of water heaters and automation systems. All of them are written out in the water supply project of a private house, the price is calculated from the specifics of the equipment. The cost of all these devices fluctuates depending on the required capacity, consumption and the source of water supply.
Installation work is most often carried out in the warm season.
The soil is more convenient for work, and the water level is lowest in summer. At this stage, the project of heating and water supply of a private house plays an important role. Sewerage, water supply and heating are often installed at the same time. On average, the works last from one to three days, depending on the specifics of the object and the complexity of the structure. Drilling of wells or preparation of wells is not considered during this time.
During the work, assembling and laying of structures is carried out. After that, a test run takes place to check the system performance.
Many are trying to make a water supply project on their own. To facilitate the task, you can find a private house water supply project. Choose a similar house drawing and calculate the approximate cost.
( 1 grade, average 1 of 5 )
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |02, Nov 2020
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |09, Nov 2020