How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video

How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video In the modern world, the construction industry does not stand still, it is in great demand.

Industrial and residential buildings are being built at a breakneck pace, one might even say that buildings sprout like mushrooms after rain.

New technologies and modern materials are used in the construction of buildings for various purposes. In this article we will try to answer important questions related to the reinforcement of a structure.

[contents ]

The choice of some materials is somewhat difficult.

For example, it is difficult to choose a material such as reinforcement.

As a result, many questions arise:

  • "What material should you buy the reinforcement from?"
  • "Where are the reinforcement made of fiberglass and metal? "

Fiberglass reinforcement

Scope of application

How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video This type of reinforcement is used:

  1. When erecting power lines;
  2. When erecting fence supports for bridges and reconstruction of roads;
  3. When constructing drainage, sewerage purposes;
  4. When building objects of the chemical industry;
  5. When building objects that do not require electromagnetic radiation;
  6. When arranging permanent formwork.

Disadvantages

How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video Low heat resistance . Fiberglass has high heat resistance, but the plastic component loses its properties at a temperature of two hundred degrees. When the temperature reaches six hundred degrees, the fiberglass reinforcement melts.

Has insufficient elasticity . This parameter provides bending of products. When arranging floors, it is necessary to carry out calculations, but this is not possible on a construction site. For this reason, ornate and curved elements are molded in production;

GRP reinforcement is exposed to alkali . The method of leaching elements from the rare earth group, which is in concrete, allows to reduce the risks.

Fiberglass reinforcement should not be used in fire-hazardous areas and where high-temperature heating is intended.

Metal reinforcement

Scope of application

How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video In some cases, metal reinforcement is used:

  • When forming reinforced concrete structures. In this case, the reinforcement plays an auxiliary role;
  • Flexible steel reinforcement is used in the construction of industrial and civil construction;
  • Rigid reinforcement is applicable in the manufacture of heavy concrete and monolithic foundations;
  • in structures where there is increased lateral compression.

Metal reinforcement goes well with concrete, which cannot be said about fiberglass reinforcement.

Disadvantages

How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video Metal fittings corrode .

This is the main disadvantage of metal fittings.There are fittings made of anti-corrosion composition, but they are quite expensive;

Metal fittings are quite heavy . This parameter increases the costs of transportation, storage and loading of reinforcement;

Fixed length . Steel bars are available in fixed length rods. In turn, fiberglass reinforcement is made very long and stored in coils, which avoids unnecessary material consumption and unnecessary scraps;

Increased thermal conductivity .

This parameter leads to the formation of cold bridges in the foundation, which have a bad effect on the strength of the erected structure.

Price issue

How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video Comparing two types of reinforcement, one cannot ignore price question.

At first glance, the price of one meter of a fiberglass product seems to be higher than the cost of one meter of a metal product, but this is not so.

With the same strength, fiberglass reinforcement has a smaller cross-section than metal reinforcement.

For this reason, relatively identical elements in parameters will have almost the same cost.

Conclusions

In this article we examined two types of fittings made of different materials. We also considered the pros and cons of these products.

Which reinforcement is better?

How to make a metal or fiberglass mesh? Which reinforcement is best for the foundation of a private house- Review + Video We did not find an answer for this question, because everything is very individual, but a lot depends on:

  • features of the structure (object) being built,
  • its technical characteristics,
  • assignments ,
  • availability of finance.

Which type of fittings to choose is up to you. Consider both options more carefully, ask the price.

To avoid various unpleasant moments, be sure to consider all the cons.

Follow our recommendations and we hope you will choose the type of fittings that are really suitable for your building. I would like to believe that the above text was useful to you. And finally, we wish you good luck in your endeavors, strength and patience!


( 1 estimate, average 1 of 5 )

.