How to make do-it-yourself floors inexpensively? Review + Video

How to make do-it-yourself floors inexpensively? Review + Video How to make inexpensive floors at home. Before you start arranging the floor, you should talk about the material of manufacture, which will help create an expensive-looking floor, but at the same time, inexpensive coverage for money. Plywood is a sheet that is made of natural veneer from different wood species, and these, in turn, are glued together using urea-formaldehyde glue. The fibers of the adjacent layers are placed strictly perpendicularly - this gives the material an additional level of strength. So, how to make an inexpensive floor at home?

Plywood is produced in sheets that have standard sizes with different thicknesses - from 0.

3 to 2.1 cm.The thickness will be provided due to the number of layers veneers that always remain odd. The finished material differs among themselves in grade, as well as in surface quality and adhesive impregnation.

General information

All produced plywood can be divided into five main types:

  1. Elite (E-marking) - the best surface quality of the plywood sheet, free from defects.

  2. Small cracks , holes from small knots, veneer patches - plywood of this type can be attributed to grades 1, 2 and 3.
  3. Plywood grade 4 h Most often it is used only for concreting, as well as creating formwork, making a rough coating for the finished floor. Despite the fact that the appearance of the material is unattractive, the quality characteristics of grade 4 plywood boards are no worse than the first grade plywood.

In addition, one should consider in advance another rather important parameter in the characteristics of plywood sheet as a building material, namely surface grinding.


According to the type of surface grinding, plywood sheets can be marked with letters:

  • How to make do-it-yourself floors inexpensively? Review + Video Ш1 - only one side of the plywood board has been sanded.

    A material of this quality is used for interior decoration and decoration, as well as for interior decoration of premises.

  • Ш2 - as is clear already from the designation, both sides of the plywood sheet are subjected to grinding. Basically, this material is used only in furniture production.
  • NSh - the material is excellent for roughing and preparatory work, since plywood is used, which has an unpolished surface.

In the production of plywood sheets, only coniferous and birch veneers are mainly used.

Please note that birch wood is light, and therefore products from it have warm and light colors. But coniferous veneer gives the surface of the plywood sheet a dark shade, and this should also be taken into account when choosing a material for finishing the floor.

The conclusion is as follows - to install an unusual plywood floor, you should buy sheets of the standard type.

Let's look at how to make inexpensive floors, but at the same time so that they are of high quality and beautiful:

  • FC brands - veneer glued using urea-formaldehyde resins, which are environmentally friendly for human health.
  • 1st grade - the number of small defects will not affect the overall appearance of the floor.

  • Ш1 - ground on one side.
  • Birch light, coniferous dark, or both can be combined.
  • The size of plywood boards and their number - everything will depend on the area of ​​the room. The size of the sheet in this case will not matter, since the waste will be the minimum of all possible.
  • Thickness from 0.

    5 to 0.7 cm.

Plywood is rightfully considered an environmentally friendly and natural building material, and for this reason it is better suited for interior decoration Total. A plywood floor will not be difficult to assemble with your own hands, and if you have a minimum set of tools, you only need a hammer and a circular saw. At home, you can even use an ordinary drill, if you are smart.

So, we present you with detailed instructions:

  1. How to make do-it-yourself floors inexpensively? Review + Video Use a circular saw to cut solid plywood sheets into strips of the desired size.
  2. As you can see, strips of plywood of this size will strongly resemble a floorboard in appearance. The size of "boards" made of plywood for the floor will be limited only by your imagination.
  3. If you do not have a circular saw, you can unfold the sheets with an electric jigsaw. The matter, frankly, is thankless - the cuts are not always smooth and are very noticeable during installation.

  4. The next step will be sanding, namely finishing the surface of our plywood "boards". Plywood should be sanded with an electric tool, but you can do everything manually.
  5. Be sure to chamfer the chamfer - this will help give the plank integrity.
  6. Prepare the base - for the rough leveling layer, use grade # 4 plywood that is not sanded. For flooring on logs, the rough layer of material should be more than 1.

    2 cm thick. The concrete base can be leveled with plywood with a thickness of 1 to 1.2 cm. Laying plywood will not differ in any way from laying a board.

  7. It is advisable that you start laying the floor from the center and to the sides, as shown in the photo.

  8. Be sure to leave a small gap between the boards.
  9. Glue or nail plywood boards to the subfloor.


If you are a fan of parquet, then you can lay the plywood floor with a herringbone pattern. As you can see, there is nothing difficult in arranging plywood flooring, but in the end you will be able to make the floor expensive in appearance and not go broke. A little financial cost, a little effort and the end result is a "rich" flooring made of natural wood.