How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video

How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video When the house is built, you should take care of the facade decoration, which should be not only beautiful, but also functional ... Today there is a huge variety of materials that protect the walls of a frame house from moisture, natural precipitation, and wind. The most common material today is facade panels.

[contents ]

Their advantages

These are: How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video

  • aesthetic qualities: due to the imitation of various textures and a large palette of colors, they allow you to make your home stylish and beautiful;
  • long life and ease of use (it is enough to wipe the panels with plain water and they already look like new);
  • the low weight of the facade slabs reduces the load on the foundation;
  • good water-repellent properties;
  • reasonable price;
  • you can add insulation or use panels with insulation. How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video

Facade panels are facing material made of polymer sheets (usually expanded polystyrene or polyurethane foam) with perforation with the possibility of fastening with self-tapping screws to literally any surface (from foam concrete to wood).

Facade cladding panel

Installation and basic rules for working with facade panels

How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video

  1. Carefully check the panels and their latches upon purchase;
  2. Follow the instructions on the packaging;
  3. The panels are installed from bottom to top and from left to right;
  4. Do not start installing panels on another wall until you have finished the one already started;
  5. Do not use the clamps of the previous row for the top row of panels, otherwise it may cause deformation of the cladding;
  6. Leave a millimeter gap in the nail holes to allow the material to contract or expand as temperature conditions change; How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video
  7. If a nail needs to be driven through the face of the panel, drill holes at the joints so you can expand the panels, and the nail heads can be painted over later. Better, by the way, to buy aluminum or galvanized nails and hammer them in at a 90 degree angle to avoid rust. It is also recommended to drive them and other fasteners to a depth of about 10 mm;
  8. As an insulating layer, materials that allow air to pass through are optimal.

Installation of facade panels

 

The surface on which the facade panels are attached must be clean (without fungal and mold growth), and also smooth and without cracks - they must first be eliminated.

A crate made of wood treated with an antiseptic or metal treated with an anticorrosive spray, for example, zinc, is mounted around the perimeter.How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video

Next, the frame is installed: horizontally for the starting profile, J-profile and horizontal sections for fixing the panels; or vertically - under, respectively, vertical sections and corners.

The formed frame creates a ventilation distance and provides a level surface. Insulation or waterproofing is added to the resulting voids.

This is necessary for the so-called heat shield effect, it effectively retains heat inside the room.

Installation of the first front panel

C How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video The tarp is fixed in the lowest point of the building, it is necessary to leave 10 cm from each edge of the wall in order to mount the outer corners there. It is important that its position remains horizontal, as the rest of the panels will be oriented towards it.

Sometimes it is necessary to cut the panels of the 1st row, for this you can use a circular saw, in such situations the starting profile is not used: the panels are only fastened through the front side with 5 nails or more, if necessary. A separate hole is drilled for each nail.

Subsequent rows of facade panels must be installed with a small distance so that the material has room for expansion.

Often the top row also needs to be trimmed, do not violate the integrity of the protective layer in this case, otherwise the front panels will not only look ugly, but their technical characteristics will deteriorate.

Types of facade panels and the specifics of their installation

  • Fiber panels and Japanese fiber panels

Consist of cement , reinforcing fibers and mineral fillers. They are distinguished by a high level of resistance to external influences and good flexibility.

How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video Such panels are attached to the already attached frame (if we are talking about 14 mm panels), on the wall or the supporting frame of the building (panels 16mm and more).

Thin panels are fixed on galvanized self-tapping screws, thicker ones are fixed with clamps.

Fiber panels are installed on a frame, which, in turn, is fixed to the wall on brackets through paronite (it will help to minimize the load on the frame structure at the time of upsetting). Insulation is placed between the cells of the frame, on top of which a vapor barrier film is laid.

Additional levels of the workflow: a basement ebb is fixed to the frame (5-10 cm above the blind area);

Climbers for installing slabs are placed on all vertical guides.

A seam strip is made to correctly position the boards relative to each other.

Fiber plates are put on the clamps located at the bottom and fixed with fasteners. All joints are treated with a sealant and painted with paint in the color of the panels.

  • Installation of plastic panels.

How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video To install them, it is also necessary to remove the previous decoration of the house, remove irregularities.Then the walls need to be marked with lines clearly vertically and horizontally at a distance of 50-70 cm.

The lathing can be wooden or metal, it is reinforced in the area of ​​windows and doors. The lattice cells are also filled with insulation and a vapor barrier film.

The specificity of the work lies in the fact that plastic panels are mounted from the corner of the building and from the bottom row, by connecting the locks and attaching them to the crate with self-tapping screws.

  • Installation of metal panels. Facade (siding)

How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video They are distinguished by an increased level of strength and a polymer protective coating.

Siding requires a metal lathing that is attached to the walls with perforated hangers.

Insulation is laid in the cells, but it is necessary to provide for such an aspect as the possibility of ventilation of the facade, otherwise the condensation formed under the metal will begin to destroy the wooden surface.

Siding is mounted from the bottom corner.

  • Installation of front panels: thermal panels. How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video

They contain a layer of insulation, therefore, the insulation is no longer in the crate cells put.

One thermal panel is attached with three supports and a starting profile.

Installation starts from the left corner into the starting profile, the clamps are fixed on the pins, to which the next thermal panel is attached.

  • Sandwich panels. Mounting. Facade of a frame house

How to make the installation of facade panels on a frame house in detail in detail: Step by step instructions + Video This name is no coincidence, since the panel contains 3 layers, one of which is insulation.

Such panels are not easy to install alone: ​​first, the U-profile is attached, where the 1st panel is inserted, and the frame from the corner of the building. Everything is leveled, the slab is attached directly to the frame.

For longitudinal joints you will need a sealant, for transverse joints - mineral wool and polyurethane foam. Subsequent panels are attached from above with locks.

( 1 grade, average 1 of 5 )

.