How to remove mold from a bathroom curtain

How to remove mold from a bathroom curtain How to remove mold from curtains in the bathroom , plaque and rust with your own hands

The curtain, which is twisted in the bathroom, requires regular maintenance, as it begins to change color from contact with water, and plaque, fungi and even rust appear on it. For each of the described contaminants, there are certain cleaning methods, and during cleaning, the material from which the product is made will play an important role. Let's take a look at how to remove mold, rust and white deposits from your bathroom curtain.

Reasons for the appearance of various pollution

First, it is worth considering what pollution the curtain in your bathroom is subject to, we will also find out the reasons for the formation,

so that in the future you can to prevent the appearance of unwanted dirt:

  1. How to remove mold from a bathroom curtain Yellowness. It usually appears at the bottom of the curtain, due to the fact that it comes into contact with foam or soapy water.

    In order to prevent the appearance of an ugly yellow tint, after taking a bath or shower, rinse the curtain with clean water and then dry it well.

  2. White stains (plaque). Due to the high content of magnesium and calcium salts in the water, it becomes hard. This is the reason why white marks appear after the water dries on the curtain.
  3. Rust.

    While it seems odd that rust does not appear on the metal, but on the shower curtain, it does occur. Red spots are very difficult to remove, and it is likely to get rid of them if they are not old. Most often, such spots appear on the bottom of the curtain, because it is this fragment that is constantly in contact with water.

  4. Mold. Very favorable conditions for its emergence and reproduction are the increased level of humidity and heat, the environment that is found in the bathroom.

    Also, most often the fungus can be seen precisely in the folds of the shower curtain. Removing moisture from the surface of the curtain and a good ventilation system that will always function will help prevent the formation of mold stains on the surface.

Now that we have figured out the reasons for the formation of dirt, it is worth finding out what products can and should be used to wash the curtains.

How to clean the curtain

What agents can be used for washing and cleaning

To remove different types of stains, it is worth using special solutions that created for this very purpose:

  • Vanish.
  • Domestos.

  • Comets.
  • Sanita.
  • The rest of the household products that are used for folk methods of washing, and these include baking soda, citric and acetic acid.

Which type of product to use will depend on the fabric of the curtain.When choosing curtains for bathrooms, you should remember that they differ from each other not only in design and size, but also in the material of manufacture.

Shower curtains can be both plastic and textile. Below are the main varieties that will help you figure out how to remove mold from the curtain in the bathroom.

  1. How to remove mold from a bathroom curtain Plastic. This type of material is quite thin, which is why it is short-lived. It is usually not washed.

    Since such curtains, made from ordinary film, are changed for new ones every 6 months, it is not necessary to wash it, moreover, the products are of low cost. But if you still really need it, you can very carefully and carefully clean the surface with a dishwashing sponge and a non-aggressive chemical. You can use dishwashing detergent or washing powder.

  2. Polyester. This is the most popular and also the most practical material that can be washed, both by hand and in a washing machine, but the temperature should not be higher than 40 degrees.

    When washing, it is allowed to use washing powder, bleach, soda, vinegar and citric acid.

  3. Textile curtains. Fabric curtains are usually made from a mixture of natural and synthetic material, which is impregnated with a special composition that can repel water. The fabric requires scrupulous attention when choosing. Usually, all care information is indicated on the product label.

    You can wash such curtains even in a washing machine, but only on a delicate mode and a temperature not exceeding 30 degrees. If the fabric is linen or cotton, then it is possible to boil it in water, where boric acid will be added. For machine and hand wash, it is best to use a detergent / gel and fabric softener to eliminate any unpleasant odors.

  4. Polyvinyl chloride. Vinyl products are attractive because they are inexpensive and easy to care for.

    They are generally not able to absorb moisture, it will be enough after bathing or taking a shower to wipe the curtain with a dry cloth. Use baking soda, scouring powders (whatever), bleach and lemon juice to remove dirt from the curtain.

Let's take a look at three ways to clean the curtain.

TOP-3 effective ways to clean the curtain

Local cleaning

It is not necessary to wash the entire curtain especially if the dirt is at the bottom of the web. You can remove stains with a regular brush and detergent to match your type of curtain.

If, for some reason, the stains are not washed off, then take a handful of baking soda, apply to a dishwashing sponge (rough side) and rub the product thoroughly. Then it remains only to rinse everything with clean water and wipe (or hang to dry).

Hand wash

To manually remove various stains, add 1 tsp in a bowl of warm water for 3 liters of water ...

baking soda and 1/2 tsp. citric acid, and then soak everything for 1 hour. Agree, nothing complicated. When the allotted time is up, wash everything with your hands and rinse well in clean water. If the curtain was heavily soiled, then the procedure should be repeated with soaking, but now in a new solution and reheated water, then rub all dirty places with a brush, and only after that you can start rinsing and drying again.

For a delicate hand wash, you can use baby bleach and a little essential oil for a pleasant scent that will clog mold aromas. This method will help to gently remove stains, disinfect the product and leave only cleanliness and a pleasant aroma.

Please note, that it is strictly forbidden to wash the shower curtains in the bathroom from mold and other contaminants in hot water, as due to the effect of high water temperature the curtains can start to deform.

Machine wash

To wash bathroom curtains and clean them of mold, mildew and rust , follow a number of recommendations:

  • The washing mode should be selected depending on the symbols indicated on the product label. If there is no tag, it is better not to risk it and put on a delicate wash cycle, as well as a temperature no higher than 30 degrees.

  • The temperature should not be more than 30 degrees, although for some products it is allowed to use all 40 degrees.
  • If allowed, add chlorine powder for washing.
  • Turn on the Extra Rinse mode, but do not use the Spin and Dry mode.
  • In order to increase the efficiency of washing, additional terry towels should be thrown into the drum of the washing machine, which will act as brushes for gentle and gentle cleaning.
  • Before washing the machine, use an extra wash for stubborn stains.

    Depending on the type of stain, use different recipes to remove unwanted stains.

Important! Bath curtains should never be wrung out as they may crease and bruise. Also, in no case should you iron the product with an iron, even if it is textiles.

How to remove the yellowness from the curtain

In order to rid the curtain from the ugly yellowness, in every house there are improvised means, and you probably have them too.

Whiteness

So, for machine wash, add whiteness to the powder receptacle (about 100 ml), and then set the long wash mode with preliminary soaking.

If the manufacturer of the product has indicated on the label that it is forbidden to use bleaches that contain chlorine, then there is an alternative - oxygen bleaching agents. These include the popular Vanish remedy, which should also be added to the powder receiver in the amount recommended in the instructions for the product. If the dirt is heavy, leave the product overnight in a bowl with a diluted bleach solution.

Folk methods of struggle

The popular method of eliminating yellow plaque familiar to everyone consists of the following stages:

  1. Wipe the surface with a dishwashing sponge, which should be moistened with hydrogen peroxide.
  2. Next, dip the composition into a solution, in which for every 1/2 liter of heated water there are 200 ml of vinegar.

  3. Finally, rinse the curtain in cold water.

An equally effective way to combat mold on the bathroom curtain is to use ammonia and table salt. The ammonia will neutralize the magnesium salts that make shower products yellow. To do this you need to take 250 ml of water, 1 tsp. salt and 1 tsp.

ammonia, and then mix everything until the salt is completely dissolved. The dirty area of ​​the curtain should be lowered into the liquid and left for about 1 hour. After that, wash the curtain as usual and rinse it by hand. And the last popular way is to add 2 tablespoons of boric acid to warm water. Leave the curtain to soak for 5-6 hours, and then you need to wash the curtain in any way convenient for you.

Removing rust stains

Recipe # 1

To remove fresh stains from rust, use a mixture of ammonia and hydrogen peroxide, and the first substance should be 3 measures, the second 1. The resulting solution should be applied with a brush, left for a couple of minutes, and then rubbed well. If you cannot remove the rust, then you should take a cotton pad, moisten it in the solution and apply it to the stain, and then leave it for 15-20 minutes. Next, hand wash the curtain.

Recipe # 2

There is also a second way to fight rust, and for it you should take 1 tsp.

acetic acid, and then add to a glass of water. Next, the liquid must be heated, but not brought to a boil, removed from the heat and add a little ammonia and 1/2 tsp. baking soda. In this mixture, dip the part of the curtain that is damaged by rust. If the destruction of the red spot did not work out the first time, then repeat the procedure.

To remove rust, use chemicals such as Sanita or Adrilan. Treat the stains with a substance and leave for a couple of minutes, and then remove everything with wet wipes. Note that when removing stains from chemical composition it is better to use rubber gloves.

How to remove mold and mildew from curtains

Fungi are very susceptible to alkaline and acidic environments, so it is better to use baking soda and vinegar to destroy it, as well as lemon juice or acid.

To remove mold from the bathroom curtain, use this method:

  • Place the curtain in a basin and rinse it in warm water.

  • Next, sprinkle baking soda on the spots where there is fungus and rub it all with a brush or dishwashing sponge.
  • When all dirt has been removed, rinse the curtain with a large amount of heated water, in which a sachet of citric acid will be dissolved beforehand.

There is also another effective method for removing fungus from curtains. For implementation, add 100 grams of baking soda and 100 ml of vinegar to the drum of the washing machine, do not forget to additionally turn on the pre-wash mode. Another way is bleach, which will be added to a bowl of water (1-2 caps).

In such a solution, the product should lie for at least 1 hour, and then rub the stains with a brush, rinse with plenty of water and dry.

Removing limescale

When combating lime-type deposits, bleach, which contains chlorine, is ideal. The curtain must be soaked in warm water, and pour 50 ml of bleaching agent into it and leave it for half an hour. Then everything should be washed, it is possible both by hand and in a washing machine. When rinsing, be sure to add fabric softener to remove odor and soften water.

Features of cleaning curtains of polyvinyl chloride (PVC)

Vinyl curtains are unpretentious in maintenance. There is only one peculiarity in caring for such products - they cannot be washed either by hand or in a typewriter. These curtains can only be washed, and for this use a dishwashing sponge that will be moistened with soapy water. If the curtains have white spots, mold or rust, use bleach, cleaning powders like Comet, or gel products like Sif to remove them. The product should be applied to the product with a sponge and left for 5-7 minutes so that it has time to act, and then thoroughly rinse everything off with water and wipe it with a dry cloth.

For popular methods of caring for vinyl curtains, use ammonia, baking soda and citric acid.

How to dry a bathroom curtain

Do not dry the curtain or wring it out in washing machines, as this may damage the appearance of the product. It will be much better if you lightly squeeze it with your hands and let the remaining water drain over the bathtub. Next, we hang the product so that there are no folds in the fresh air (street or balcony with open shutters) until it dries completely. If it is not possible to dry the curtain on the balcony, hang it on the cornice, and then wipe it with a dry rag and leave the bathroom door open to allow air access.

Please note, that drying curtains near heaters sometimes leads to yellow spots.

Preventive Measures

To prevent stains on the shower curtain, special products are simply needed. For example, water-repellent products will help prevent limescale build-up, and an anti-microbial spray will help keep fungal spores out. After you finish showering or bathing, wipe dry the curtain so that moisture does not remain even in the folds. Leave the bathroom to ventilate.

For weekly maintenance, it will be correct to use a spray bottle and a special solution. To prepare it, you will need 200 ml of water, 5 drops of essential oil with your favorite aroma and 50 ml of table vinegar. Spray the composition onto the curtain and wipe with a sponge. Once a month, the curtain must be washed by hand (you can also wash it in a typewriter). The main condition is proper care of the product, and in this case it will retain its original appearance for a long time.

( 2 marks, average 3 of 5 )

.

selection and installation- Overview + Video
selection and installation- Overview + Video

Posted By: Work Style |04, Nov 2020

Calculation of heat loss at home: formula, calculator
Calculation of heat loss at home: formula, calculator

Posted By: Work Style |11, Nov 2020

How to degrease the surface before painting
How to degrease the surface before painting

Posted By: Work Style |09, Nov 2020

Wall primer for decorative plaster and types
Wall primer for decorative plaster and types

Posted By: Work Style |08, Nov 2020