Ideas of what can be made from wooden pallets: Review + Video

Ideas of what can be made from wooden pallets: Review + Video Ideas of what can be made from wooden pallets? Pallets, or wooden pallets are an excellent consumable material for creating various types of buildings, crafts and structures on the territory of a summer cottage. And this material has become so excellent due to the low price, the ability to independently collect them from all kinds of materials or even find them for free and use for their own purposes. For pallets on a suburban area, you can find a lot of ideas for use. What can be made of wooden pallets?

A pallet consists of several boards fastened into a single structure. They are usually used as a stand.

The boards are made of wood and this helps define the performance of the pallet.

General information

What can be used for pallets

Products made from pallets for a summer cottage can be divided into two large groups, namely decorative and practical. The latter include various crafts that can be useful for everyday life, for example, it can be a bench made of wooden pallets, on which several people can sit at the same time. But the decorative items include products that are required to decorate a suburban area or house. For example, it can be a great fence for a flower garden.

Such products do not have a protective function, but they will become an excellent decoration.

Assembling a pallet from wood at a summer cottage

Assembling a pallet from wood at a summer cottage will not be difficult. To do this, you may need a certain number of planks, a planer, uneven bars, a saw, sandpaper, hammer, nails, pliers, or a nailer. The standard dimensions of the pallet according to GOST are 1.2 * 0.

8 * 0. 14 meters.

Ideas of what can be made from wooden pallets: Review + Video But these data are not so important for manual assembly, since they can go to a smaller or even larger side. The main thing is that the structure as a whole is flat, and there are no protrusions of the boards. To design a pallet in the country, you will need to prepare 11 boards.

Eight of them must be size 1.2 * 0. 14 meters long and the rest of the boards should be 0.8 meters long and 0.14 wide.

The thickness should be at least 1 cm, and it is desirable that it be the same everywhere. In addition to the boards, you will need 9 bars of size 0. 14 * 0. 14 * 0. 1 meter.

Next, you need to adjust all the bars and boards to one desired size, get rid of irregularities and chips, and if necessary, even paint in advance. Then you can start assembling the pallet. Next, take one of those smaller boards in your hands and make 5 notches on it so that they can divide it into equal segments. In such places, the ends of five long boards should be driven end-to-end with nails. They will be the very front side of the pallet, and two more small boards need to be nailed to the other end and middle of the long ones.

All protruding nails should be removed with a hammer directly inside the structure.

Next, let's move on to the next stage, namely, the connection of wooden blocks. They should be placed evenly on small boards, in the middle and at the corners. At the end, three small boards should be nailed from the bottom of the beams, parallel to the top three. On this, a wooden pallet with your own hands will be ready and it can be used for any products in the summer cottage.

Use such a blank for any ideas, and then you will be able to create wonderful crafts.

Interestingly, h that wood pallets may be required precisely at those moments when they are not on the site. Instead of buying or looking for the required product, you can make it yourself from the materials that are available. This is done quite simply due to the lightweight design of the pallet. A few cuts, measurements, hammer and nails will be enough.

Making a pallet with your own hands will help you save a certain amount of money.

Creation of products from wood pallets

The manufacturing process itself can be safely divided into three stages, namely the idea, assembly and preparation of pallets. At the first stage, it is worth deciding what exactly you are planning to use this product for, to think over the design and appearance features in advance, and in special cases even to perform the necessary measurements and calculations.

It is not difficult to make a wooden pallet, and at the second stage you will need to prepare the required number of pallets for subsequent assembly. First, you need to get rid of various defects, and thus you will be able to secure the pallets.

Next, take on the shaping. If necessary, you can additionally paint, varnish or even decorate in another suitable way.

The place of the saw cut must be smooth so that it is impossible to catch on and drive a splinter under the skin. At the final stage of the assembly, you need to collect all the pallets into a single structure and fasten everything together. Much in the connection will depend on the shape of the future product.

Let's look at some really interesting ideas for using pallets at their summer cottage, both practical and decorative.

Country loungers

One of the most useful and at the same time simple household products that can be made from pallets is a low lounger. It will require three pallets at once. First, you should perform processing, coloring and varnishing of the components for the future product. Then fold everything in a row so that the width of the structure is as large as possible.

Further, everything should be fastened together in such a way that the pallets do not creep. For this, you can use screws, nails or other types of connections. On this, the manufacture of the lounger can be considered complete.For the design, you can even use the fourth pallet, and for it you will need to add a tilt angle for greater convenience, or make beautiful comfortable armrests. After that, put the lounger in the place chosen for it, cover it and use it with pleasure.

Coffee table

A practical and at the same time quite simple product would be to use a wooden pallet as a small table for the living room. For its manufacture, you can use two pallets, a tabletop and four legs, and for its manufacture you will need very few tools that every home craftsman has. First, clean the pallet, remove all excess nails, scratches and small chips should be processed with sandpaper. This is followed by staining and varnishing. Since parts of one pallet will not be visible, only the side panels should be changed color.

For the second pallet, you do not need to paint the bottom. Glass, heavy plywood, or even something similar can be used as a countertop for a coffee product. It should be slightly larger in size than the pallet. Make the legs from small blocks. You can also simply place linings under the makeshift table so that the pallets do not scratch the floor of the room.

There is no point in connecting wooden pallets to each other, because the structure will be lighter in a collapsible state. It will be enough just to attach to the lower part of the leg linings that will be prepared or underlay. Next, place one pallet on the second. If the tabletop is made of glass, then you should attach it to the wood using double-sided tape, a special adhesive or liquid nails. If it is a thick plywood plate, then it will be enough to screw everything onto the screws.

As a result, you will have a beautiful and neat coffee table that will really decorate your living room at home.

Fencing for a flower bed

We looked at how to make a wooden pallet with our own hands, and now we will consider another option that make direct from it. A rather interesting example of the use of wood pallets for decorative decoration of a suburban area will be a small flower garden fence.

Ideas of what can be made from wooden pallets: Review + Video There is practically no practical benefit from it, but everything will look very good. A certain number of pallets will be required for the construction, and in many respects it will depend on the future size of the fence.

The plan described below is created for dimensions 3.6 * 3. 6 * 0. 6 meters. The length for each fence is 3 pallets.

First, prepare 9 wood pallets that are standard sizes. Saw off 0.2 meters from the width of each element and lay the first side of the fence face down so that the smaller sides can touch each other.

It is required to fasten everything together using the remnants of pallets, for two large ones, use one that is smaller. Here you can use screws or bolts, and it doesn't matter at all, because the fastening points will not be visible, because they will be located on the seamy side.

A similar action should be performed with the other three parties. Next, start fencing the flower bed.

Each side should be buried halfway (0.3 meters) under the ground so that the structure is stable and strong. Their ends should touch each other.

Between each other, it is best to fasten the sides using metal corners with grooves that are installed at the junction. If for some reason they are not there, then you can take a small block, set it in a corner along the fence, and then drive 3-4 nails from the front side of each side. This can be done with each of the joints, of which there are only four.

As a result, on a suburban area, you will be able to make a decorative type of fence for a flower garden or flower bed, the dimensions of which will be 3.6 * 3.

6 * 0. 6 meters. It can be made both in height and in width by using an additional number of pallets. But if you plan to make a large-scale fence, then it is worth creating a through hole in it for the entrance, and it will also be possible to install doors or wickets there. Above you can see in the photo examples of product designs that are created from pallets at their summer cottage.

You can take these ideas as a basis for future products from materials that are always at hand.

When creating, be sure to take into account the fact that everything is based on a clear product plan. Otherwise, you may end up with something crooked, unreliable. The most important thing is that the product meets safety requirements. Interaction with it should not cause any injury to adults and children.

Fulfillment of all the necessary requirements, and also knowledge of the general principle of the production of such products will make it possible to fulfill almost every practical or decorative idea from pallets on the territory of the summer cottage.

Gazebo

How to make a gazebo from wooden pallets? To begin with, you should carefully inspect all pallets and, if necessary, repair or clean them. Further, according to the project, divide the pallets into several drawings. Due to the fact that pallets are made of non-planed boards, everything must be sanded before use. To protect against bacteria or fungus, all materials should be coated with an antiseptic impregnation before creating a gazebo.

After the product is completely dry, you should paint the pallets in the paint of your chosen shade.

Now the next step. A pallet gazebo can be installed on compacted soil, but it is better to make a foundation under it. It can be piled, that is, screw piles or asbestos-cement pipes will be used for it.When choosing this option, you can do everything quickly enough, and after installing the supports, fix the strapping made of timber or metal on which the floor will be laid.

Before creating a gazebo, it is worth deciding in advance on the required number of piles. If there is a strip base, then a trench will be needed and after installation it should be poured with a cement-sand mixture.

Please note that the pallet gazebo is light in weight, so you can make a shallow base, and at the same time its width should be 0.1 meter more than pallet thickness.

If you will not make the foundation, after the sand cushion, waterproofing should be laid to protect the wood from moisture from the ground:

  1. Ideas of what can be made from wooden pallets: Review + Video First, make a frame from beams.

    The distance between them must be equal to the width of the pallets used. In addition, be sure to make sure that the materials used are definitely free of cracks or rot. It is important to pay attention to chips, because because of them, the frame simply cannot withstand the load.

  2. The posts are attached using self-tapping screws and metal corners. If you made a strapping of metal, then "ears" should be welded to the channel.

  3. At the ends of the uprights, install a top rail of the same section. Note that pallets can be installed in 1-3 rows. When choosing a design, it should be remembered that the walls, standing in a single row, will perfectly transmit sunlight, but they will not protect well from slanting rain. If you want to make solid walls, then attach the pallets with a slight offset relative to each other.
  4. After the selection of the type of construction, the pallets are fixed to the racks using screws or anchors.

    The connection is carried out using nails or self-tapping screws.

If you follow the instructions step by step, then you can definitely make a reliable gazebo. Remember that to create a light structure, one row of pallets is enough, and for a massive and protected gazebo, you will need to fix 2-3 rows of products. Now a little about the roof.

What can be made from wooden pallets? The gazebo - yes, but the roof for it - no.

In their usual form, they do not fit well, so you need to disassemble everything into boards and make a crate.

The following materials may be required for manufacturing:

  • Polycarbonate - such a material perfectly transmits sunlight and is resistant to drops temperatures. When choosing a material, you can choose any shade.
  • Ondulin - it is quite popular because it has a moderate cost, and is also perfectly mounted on the crate. In addition, it has a long operating period.

    If you choose a green or brown material, you can make a gazebo that fits perfectly into the landscape.

  • Soft tiles - this material is more expensive, but note that it goes well with wood. If you wish, you can choose a coating with different shades and patterns.It should be noted that such material requires the creation of a continuous flooring for itself.

The shape of the roof can be different, and when creating a gazebo from pallets, it is important to choose the right shade of roofing material.

For the gazebo floor, use materials that are intended for outdoor use, such as decking, deck boards, stone or terrace tiles. All of them are resistant to moisture and abrasion. In addition, they are not afraid of low temperatures and have a beautiful appearance. If you plan to create a floor from boards, then cover everything with a protective compound and varnish.

In order for all the elements of the gazebo to be combined with each other, the described products can be used to decorate the structure from the inside.

Of these, for example, you can make a wide sofa and a beautiful table, which will be located in the center of the building. Remember that coating with paint and varnish is required not only for decoration, but also to protect the material from negative environmental influences. Electricity can be supplied if desired.

Conclusion

To determine which design and product is most suitable for your summer cottage, you should definitely consider a photo of ideas for products made by yourself. If you follow the step-by-step instructions, everything can be done easily in a short period of time.

.