The first thing a person turns to when entering a room is the ceiling. This is beauty, lighting, comfort, height, total volume.
The upper tier concentrates on many factors. Sometimes it takes more time to create a masterpiece than to arrange the rest of the room. One of the solutions to these problems is the option of installing a two-level stretch ceiling.
The process is complex and it is better, for a good result, to entrust the work to professionals.
The article describes the characteristics of a two-level stretch ceiling. Describes the main materials used for the manufacture of ceiling structures. The nuances and features of decorating a room with the help of upper-level lighting options are revealed.
The basic elements can be conditionally divided into solid and elastic parts.
When installing multi-level ceilings, at least two different types of materials must be present:
First of all, a design project of the future ceiling is developed in accordance with the general arrangement of the room.
Then the surface is prepared.
Dust free with a deep penetration primer, if necessary, plaster or paint to prevent rust spots from reinforcement. The marking of the ceiling pattern is applied.
The next step is to arrange a frame for solid elements from special galvanized metal U-shaped profiles. They bend easily along the contour of the drawing.
Several options can be attached to it.
When using drywall. Only waterproof is taken, it is green in color.
The thickness must be at least 10 mm.
Positive sides of gypsum board:
Polyurethane panels with foil interlayers. They are mounted according to a similar principle, but since they have conductive layers, only special fasteners with an electrical insulating shell are used.
Before fastening, a hole of slightly larger diameter is drilled than the self-tapping screw.
These panels have different surface colors, they can be matte or glossy. They can be used to mount conventional lamps for gypsum board.
Their feature is the ability to connect special small LEDs directly by puncturing through the surface to the conductive layers of metal foil. The LED legs are of different lengths and are designed for contacts in the right place.
This function can produce various light figures on the ceiling. LEDs come in a variety of colors. These patterns can be changed frequently at will.
It is possible to use dimmers and use them to regulate the intensity of illumination of different LED tracks.
The voltage across the layers is 12V or 24V. By the number of possible connection of 800 fireflies.
Polystyrene is rarely used as a material for a multi-level ceiling, but it is worth considering.
Sheets are light, delivery to the object is not difficult. It is mounted directly to the ceiling using special adhesive mixtures.
Despite its simplicity, only experienced professionals can work with this material. It is easy to handle but very fragile.
If you are careful, the result will amaze you with its graceful forms.
The lighting is installed with such a ceiling only away from the details, but this is usually thought of in the designer's project.
It can be serviced with care in the future.
Such material does not allow moisture to pass through, provides increased sound insulation, is a good heat insulator.
All of these materials are used to produce the protruding parts of the two-level ceiling.
In combination with them, materials for stretch ceilings are used. They are mounted as elements of the second internal level.
The material is fastened using a special flexible molding, fixed to the details of the previously mounted hard ceiling level.
Then, under the action of high temperature, the material acquires increased elasticity and is attached to this profile.
When the PVC cools down, the film shrinks and acquires a flat surface.
According to its external characteristics, the material is produced in different colors. Matt and glossy.
With the help of holes and special parts in such a ceiling, you can organize the lighting.
Attention! Installation of a PVC ceiling with polyurethane parts is not possible. Polyfoam will not withstand high temperatures.
In this case, only fabric tensioning materials can be used. The heat gun is not used in this case.
There is no single sample for the combination of materials for the production of a two-level ceiling.
With the right choice of color and surface quality, you can visually raise and expand the room.
Give it a unique flavor.
This design is convenient in that it is always possible to change the design until the project is completed.
Posted By: Work Style |01, Nov 2020
Posted By: Work Style |13, Nov 2020
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |09, Nov 2020
Posted By: Work Style |01, Nov 2020