Glue the tile on liquid nails - when to do it
Tiling in the bathroom is usually done with special building mixtures or cement. But in most cases, glue the tiles on liquid nails will be the right solution, because this is a special composition that has a high level of adhesion, durable and reliable.
When choosing tile adhesive, experts often give preference specifically to liquid nails, because when using cement, a large amount of dust cannot be avoided, and it will take a very, very long time to wash the bathroom.
work with cement is laborious - the solution should be mixed in small portions, which is very difficult to do manually, and it is impossible to bring a concrete mixer into the house. Liquid nails in such a situation will be an excellent solution - with their help, the process of gluing tiles will be greatly simplified.
Please note that liquid nails are a polymer-based adhesive solution with the addition of white clay, chalk, other fillers, which help to level the porous surface of the base. The thick and dense glue mass will be placed in special tubes that are easy to use and required for filling the gun.
Liquid nails are a versatile tool - they will make it possible to glue a variety of materials, including glass, ceramics, artificial and natural stone. After hardening, the composition becomes very durable and does not lose its properties for a long time.
Nails will be available in a variety of colors, but the most commonly available shades are
For work with ceramics, white liquid nails are usually used, and transparent compositions, due to a decrease in strength, are mainly used as a sealant for plumbing.
Liquid nails are sold in two varieties, depending on the properties and compositions:
The level of adhesion of such adhesives is much higher than that of acrylic.
Liquid nails with solvents can quickly set to substrates, are capable of gluing glossy and smooth materials, and are durable. Neoprene adhesives are more suitable for working with tiles in the bathroom, because they are the most resistant to moisture and do not deteriorate from temperature extremes.
Liquid tile nails are becoming increasingly popular in kitchen and bathroom renovations.
They are great for gluing ceramic tiles because they have the following advantages:
There are few disadvantages of such a tool, but still there are. For a large number of compositions, the adjustment time is rather short, and therefore it is better to immediately lay the tiles evenly or try to quickly align their position. Already after 10 minutes, the glue will set, and it will not work to bring a large masonry to order without some experience. Liquid nails cost a lot more than cement-based mixes.
If there is a desire to renovate the entire bathroom, the costs will be serious. Adhesives of this type are sold in closed cartridges with a volume of 0.3-0. 5 liters, no more, and therefore will need to overpay even for packaging.
The scope of liquid nails is very large, and therefore they are considered a universal type of tool.
Adhesives are suitable for smooth and porous materials, although special compounds are often produced for tiles. Ceramics are perfect for gluing on nails, and at the same time not only for wall surface finishing, but also for flooring.
Fine-grained fillers will guarantee adhesion of even those parts that do not fit tightly to large and light weights.Most often, liquid nails are used for private repairs, because it is very expensive to completely paste over a bathroom on them. It is undesirable to use glue in places that will be located under water, and for this purpose it is worth using special cement compositions with an increased degree of water resistance.
Another option would be to use liquid nails, but the seams need to be covered with a moisture-repellent grout.
When tiling bathrooms, choose a composition that will perfectly withstand high levels of humidity. It is also important to take into account the size of the tiles to be attached - for porcelain stoneware and large elements, you should buy liquid nails with an enhanced degree of adhesion. If you need to glue the elements to brick or concrete, it is better to buy liquid neoprene nails, and acrylic compounds can be used for drywall.
Even when buying, you should pay attention to the following indicators:
- Drying rate.
- Suitable for outdoor / indoor use.
- Fire safety.
- Temperature mode.
How should the tiles be glued?
There are different ways to glue tiles on liquid nails :
Typically, the latter option will be used when the tile is large or heavy. Before starting work, an approximate scheme should be determined, placing the rows so that the minimum number of elements is required to cut.
Preparing the surface for work
First you need to prepare the base - clean it from dust, grease, dirt.
You should also remove any previous materials and their remnants, and irregularities should be repaired with cement mixtures (the floor is affected by the screed, otherwise it will lie crookedly). After that, the base should be primed once or twice in order to improve the adhesion to the tile material, and then wait for complete drying.
If the adhesive is toxic, install the tiles only with gloves or a respirator. A balloon with liquid nails is placed in a construction gun, the tip is cut off, and then the composition is squeezed out. Then proceed as follows:
To keep the same distance between elements, use dividing crosses. They can be removed three hours after all the work is completed.
Applying glue in work to different tiles
You can glue the tiles on liquid nails, because they are suitable for laying elements of different textures with different shapes and types. If the ceramic elements are small or medium-sized, spot application of glue around the entire perimeter is sufficient. Large-sized elements can be turned with a snake, and the applied layer can be leveled with a spatula.
When using liquid nails, you can attach mirror tiles, plaster pieces, tapes or mosaic stone to the surface of the walls, ceiling. The heavier the materials, the more thorough the application must be.
Consumption will strongly depend on a certain type of funds, and also on other factors:
If you squeeze the adhesive out of a regular tube of nails, the strip will be 34 meters long with a nozzle thickness of about 0.2 cm, although this joint width is not enough to hold the tile. The optimal thickness of the strip of glue will be 0.5 cm, for which you will need to properly cut the spout on the cartridge. Usually, in this case, one package will suffice from 10 to 15 linear meters of tiles of any size.
Ceramic falling off
It also happens that individual elements begin to fall off the wall after completing work. From that moment on, the remnants of the glue should be immediately removed, and the elements themselves should be well cleaned. Care should be taken because the material is fragile and the adjacent tiles may be damaged. New glue should be applied to the cleaned areas, and then the element should be fixed with hands on the wall surface. Seams can be rubbed only after the glue has completely dried (at least a week).
How to remove liquid nails
An adhesive of this type will stick tightly to the surface, and it is quite difficult to remove it. If there are several ways to remove materials:
- Cleaners and solvents - such products will be sold in building markets, and the base should be moistened with them, after 1/4 hour, wipe off along with the composition that has dissolved.
- Scraper - using a plastic or metal scraper, you can remove dried adhesive mechanically. Instead of a scraper, a metal spatula is suitable.
- Screwdriver - attach a nozzle to the device in the form of a brush, you can effortlessly remove the glue from the wall or tiles.
- Burner - glue spots will be slightly heated with a small burner to about +60 degrees, and then easily removed with a rag and spatula. Instead of a burner, craftsmen often use a hair dryer.
As you can see, there are plenty of ways.
Service life - how to extend it
Liquid nails are a durable material, and they can also last for several years from the date of application.
To increase the operational life, you should use the following tips:
Such methods will definitely help. If you need to replace some of the spoiled or peeled tiles in the bathroom, you will not find a better option than planting them on liquid nails. To begin with, the base should be cleaned of old glue, degreased, and also removed all types of dirt.
The mold should be destroyed, and the wall should be treated with a composition against fungi. The crumbling layer of plaster should be ripped off, and then the area should be leveled with cement mortar.
( 3 marks, average 1.33 of 5 )
Posted By: Work Style |06, Nov 2020
Posted By: Work Style |02, Nov 2020
Posted By: Work Style |13, Nov 2020
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |10, Nov 2020