Latex wall putties: advantages and disadvantages

Latex wall putties: advantages and disadvantages Latex putty for interior use - pros and cons

Putty is one of the most popular materials used for leveling ceilings and walls. Among the incredible variety of putties, latex-based formulations are especially popular. This material has high technical properties and is also easy to use.

We suggest considering the advantages and disadvantages of the finished latex putty in more detail in article

General information

Features

As in all mixtures for putty, the latex composition contains:

  • Specialized substances that will give plasticity and elasticity to the material.
  • Additional additives that will give the material certain qualities.

  • All kinds of fillers.

An emulsion of dispersed polymer particles in an aqueous solution is used as the main component in the manufacture of latex-type coating. There are several varieties of latex, depending on which type was used in the manufacture of the composition, and the characteristics as well as the properties of the enamel will depend. Specialized ingredients such as antiseptics are often added to latex formulations. Such additives make it possible to use this material in a room with a high level of humidity, because the resulting coating will be resistant to the appearance of mold and fungal colonies.

Varieties

There are no big differences in the latex mixtures produced. Certain qualities of the material may differ depending on the composition and the manufacturer. According to the form of release, the following types of products are distinguished:

  • Ready solution that can be applied immediately.
  • Mixes in dry form, from which you want to make a solution with your own hands.

Latex formulations are available in a wide range of colors, making it easy to choose the perfect shade.

In addition, latex formulations differ from each other in terms of product output. According to the field of application, the following compositions can be distinguished:

  • Latex wall putties: advantages and disadvantages For wet rooms.
  • For dry rooms.
  • Mixes of universal type.
  • For construction outdoor work.

  • For interior decoration.

Now about the pros and cons.

Advantages and disadvantages

As with all types of putty mixture, the latex-based composition has certain positive and negative sides. The advantages of the composition include the following characteristics and properties:

  • Coatings can differ in the minimum degree of shrinkage.
  • Certain varieties of latex coatings are incredibly resistant to temperature extremes.

    This quality makes it possible to use the material not only for interior, but also exterior wall decoration.

  • Resistance to atmospheric precipitation.
  • Large color palette.
  • High levels of adhesion to surfaces of various materials.
  • Due to the viscous consistency, the mortar will easily penetrate and fill cracks on the surface.

  • When dry, a highly durable coating appears.
  • Excellent elasticity.
  • Ideal as a base for staining. Such a coating will not absorb paints and varnishes, which makes it possible to reduce paint consumption during final finishing.
  • Ease of construction work.

  • The resulting coating will not crack or peel off.

Despite the many advantages of latex material, it has certain disadvantages. Let's consider the main disadvantages of latex wall putty:

  1. The mortar made cannot be exposed to low temperatures. When frozen, materials will lose certain qualities, and therefore even if the solution is thawed, it will no longer be suitable for use.
  2. The cost of such a coating exceeds the price of most types of putty composition.

    But such material can be applied in a layer with a thickness of 0.1 cm, in contrast to cement or acrylic putty, which makes it possible to significantly reduce consumption.

Now let's talk about the scope.

Scope of use

Latex compounds can be used for both exterior and interior construction work. The mixture has excellent adhesion to almost all other materials.

In this case, metal surfaces are an exception - it is not recommended to putty them with latex compounds. These products are ideal for the following materials:

  • Brick walls.
  • Plastered surfaces.
  • Concrete.
  • Plasterboard sheets.

  • Tree.

The scope of the latex material is not limited to leveling surfaces. A similar mixture is used for the following purposes:

  • Making a base for painting with alkyd enamels, oil compositions or water-dispersible compositions.
  • Sealing joints from drywall sheets.
  • Elimination of cracks and various flaws on the surface.

  • Puttying the slopes of window openings.
  • Repair and restoration work for wooden structures.
  • Creation of different textures on surfaces.
  • Decorating papier-mâché items.

Now about the manufacturers.

Details

Manufacturing companies

Before buying latex formulations, you should pay attention to simply characteristics and composition of the mixture, but also on the manufacturer. To buy high quality materials, you need to get acquainted in advance with manufacturers who have proven themselves well in the finishing coatings market, as well as study product reviews.

"Tex"

This company is one of the largest Russian manufacturers of building materials. The company offers high quality products at reasonable prices, including latex compounds for puttying.Latex-based mixtures are produced in two types:

  • "Universal".

  • "Tex Profi".

The second type of putty is intended for interior wall and ceiling finishing for leveling before applying the topcoat. The material is ideal for application to plastered walls, concrete, plasterboard and fiberboard. It comes in white with a gray / cream shade. The mixture is sold ready-made for application in containers with different volumes (1.

5, 5 and 8 kg), and even in large buckets of 16 and 30 kg. The universal mixture is intended for indoor finishing work. the solution is applied to the surface before painting or wallpapering. This type of plaster has a high drying rate. Drying time at a pleasant temperature is 4 hours.

The mixture can be applied to the surface with a layer with a thickness of 0.1 cm. The quality of the finished latex putty was appreciated by buyers who did not have experience with putties, as well as by masters of finishing construction work. Among the advantages of the material, we single out the following qualities:

  • Latex wall putties: advantages and disadvantages There is no unpleasant aroma.
  • Elastic soft consistency.

  • Creates a highly durable coating.
  • Economical consumption.
  • Convenience of application.
  • Low cost.

Certain buyers note that the mixture will be difficult to tint, which is the main disadvantage of the material.

"Profilyuks"

TM Profilyuks is a part of the German concern Meffert AG Farbwerke. High quality finishing materials are produced under this brand. latex putties are manufactured under the name Profilux Profishet. Such material is produced ready-made for application. It is used to level various indoor surfaces.

This makes it possible to obtain a perfect snow-white coverage. After drying, the mixture forms a high-strength coating that is resistant to moisture and mechanical stress. Such a putty can be used to create a finishing type of coating. The mixture perfectly closes various flaws on the surface, small seams and cracks. The drying time of the solution can be from 4 to 6 hours.

Buyers highlight the following product advantages:

  • Drying speed.
  • Ease of application.
  • Excellent grip.
  • Smooth, level surface.
  • The resulting coating is easy to sand.

Consider one more firm.

"Lacra"

The company has proven itself in the Russian market as a manufacturer of high quality paints and varnishes. all materials that are produced under such a brand meet world standards and are environmentally friendly. Latex formulations from the Lakra company are produced under the name Master's Choice. In the composition of such material, in addition to the main components, there are antiseptic additives, which will make the coating resistant to the formation of mold and mildew.

The mixture is needed for interior wall and ceiling decoration prior to application of the final coat. Buyers highlight the following advantages of the material:

  • No unpleasant odor.
  • Low price.
  • Dries quickly.
  • Convenient consistency for application.

  • Perfectly levels wall surfaces.

The disadvantages include not the most economical consumption of the mixture.

"Optimist"

This is also a popular Russian manufacturer of paints and varnishes. The company offers many high-tech building materials. The company also produces a latex water-dispersion mixture, and such a composition is intended for interior decoration in a dry room.

The mixture is used to repair cracks and irregularities in the surface before applying the final coat. In the role of decoration, you can use wallpaper, paints or other decorative mixtures. This putty is available in white and is immediately ready for application. The material is slightly resistant to frost and can withstand up to 5 freezing cycles at a temperature of at least -25 degrees. This quality makes it possible to transport the mixture at a low temperature.

Buyers highlight the following advantages of latex wall putty:

  • The resulting coating can be easily sanded.
  • Excellent grip.
  • Fire safety.
  • High degree of plasticity.
  • Health safety.

  • Low consumption per square meter.

The disadvantages of a solution usually include a high price.

How to dilute

Ready-made mixtures are easy to apply in application, because they do not need additional efforts and time spent on creating a solution. But dry mixes are much cheaper and are no less popular. Putty in the form of a powder is diluted in plain water in a ratio of 1 to 1.

It is not required to make a solution from the entire amount of plaster in the package. It is required to pour a little dry mixture into the container, and then add water, while stirring all the time. After perfect mixing of the mixture with water, you can start finishing, and the finished composition can be applied within 1 hour, and after that it will harden and become unusable.

Application Recommendations

Before starting repair work, it is necessary to prepare the surface to be treated as best as possible. Remove all dirt from the base under the putty, and then the surface needs to be primed.

It should dry out completely, and only after that it will turn out to start filling the surface. Latex mixtures are not toxic, but sometimes people have an intolerance to some component of the composition. Take care of safety measures before starting work. Avoid skin contact with the putty, and therefore work best with gloves. When doing interior work, the room must be checked.

Before applying the putty to the surface, it is required to stand a little indoors. It is advisable to bring the solution into the room a couple of hours before starting work so that the temperature adapts to room temperature.After a little putty, pour it into a separate container. Dilute a very thick mixture with water, and cover the bucket with the finished composition tightly with a lid so that the mixture does not dry out.

The material must be applied with a metal spatula.

the thickness of the layer should not be more than 0.3 cm. Due to the fact that the mixture has excellent plasticity, almost any person can handle it, even without work experience. If you need to do several layers, wait for the previous one to dry perfectly before applying each further layer. This time may differ for mixtures from different manufacturers, and therefore it is required to see such information on the packaging.

Typically, the coating dries out in 2-6 hours. Outdoor work requires certain weather conditions. Do not putty the outer walls in case of rain or exposure to direct sunlight. Smoothing the surface to make the coating smooth with a sponge float. You will find other useful secrets in the following video.

.