Laying siding on the ceiling - instructions, nuances, photos

Laying siding on the ceiling - instructions, nuances, photos Laying siding on the ceiling - instructions, nuances, photos. The main purpose of siding is to use it for finishing roofs and facades of buildings. But due to its unique qualities, the material is also excellent for indoor use. Ceiling siding is currently quite popular and is used even more often than slatted or plasterboard structures, since it is more resistant to mechanical damage, heat resistant, has a long service life, and is also attractive in variety colors and textures.

How to choose siding

This type of material is made in the form of plastic panels.

Such a base makes it possible not only to qualitatively level the ceiling surface, but also to obtain a seamless coating. When choosing siding, pay attention to how much the panels weigh, since most of them are intended for outdoor use and using on the ceiling will not be the best idea. Therefore, they contain metal, which is a significant weighting agent. As you can see, a material with a large weight is not suitable for a ceiling. In modern production, more attention is paid to the production of two types of siding - vinyl and wood.

But note that wood-based material does not tolerate moisture and high temperature well enough, therefore, it is also better not to use it for the ceiling. Vinyl siding, on the other hand, has high performance characteristics - it is lightweight, non-flammable, and easy to maintain. The appearance of vinyl panels is presented as strips with a solid surface or one with microscopic perforations that provide good ventilation for the ceiling.

Advantages and disadvantages

Siding has become so popular with consumers, as it has a number of undeniable advantages:

  1. Laying siding on the ceiling - instructions, nuances, photos The material is heat-resistant and moisture-resistant. It can be safely used for any type of finish, even for bathroom ceilings.

  2. It does not lose its original color over time.
  3. Steel or metal siding will not corrode.
  4. The material is fireproof, therefore it is often used for finishing kitchens.
  5. Environmental friendliness. The composition of the material used in the manufacture of panels includes only safe components that will not harm human health.

  6. Easy to clean, because siding can even be washed.
  7. Easy to install siding on the ceiling, you can do it yourself without any help.
  8. High resistance to external factors, which is why ceiling decoration with siding on an open veranda or balcony is often used.
  9. Has a wide range of colors. The products are sold in about 12 shades, and the lighter you choose the tone of the coating, the higher the ceilings will appear.

  10. Siding helps to hide the imperfections of the ceiling.
  11. Any type of luminaire can be installed in a panel structure.

But it's worth talking about the shortcomings. The main and significant thing is that the siding ceiling has a large coefficient of expansion due to the effect of thermal factors, as a result of which the panels can begin to protrude from the system. But, this defect can be easily corrected and even prevented by leaving 2 cm of free space between the suspended structure and the rough ceiling.

Also, the rooms where the siding ceilings are made become slightly lower, so this method will not be appropriate for rooms that are no more than 2.5 meters in height.

How to trim the ceiling

Choice of material

Before starting the sheathing, you should select the finishing materials for the ceiling and elements from which the future frame will be made. Depending on your preferences, you can buy different types of panels that differ in width, thickness, shade and other parameters. Vinyl siding is the most convenient and practical to work with, is lightweight.

This material is available in smooth or perforated panels.

Note! When choosing a siding for ceiling installation, do not confuse it with wall cladding panels, although both options can be used for ceiling decoration.

Also note that each panel is evenly painted over and that the coating itself is uniform. Each plank must be flawless, even and free from an unpleasant odor.

To install the frame, you need:

  • Laying siding on the ceiling - instructions, nuances, photos Profiles - ceiling and runners.

  • Elements for fasteners - screws and dowels.

It is impractical to install a frame wooden base, since over time it will be deprived of strength and will bend. In addition, the tree is afraid of high temperatures and humidity. But if you still need a wood base, buy a bar with a section of 0.4 * 0.

4 meters. Use bars with the same parameters or with a section of 0.4 * 0.6 meters as guides. Before starting the interior work, try to think through the lighting in the room and buy all the lighting fixtures right away.

It will be better if all the components and panels are bought in a slightly larger quantity, for a reserve, since there are often situations when, with a shortage of materials, it is almost impossible to find an analogue.


Before starting the installation of siding on the ceiling, surface preparation should be done.

The stages of preparation are as follows :

  • The room should be cleared of accessories and furniture, remove lighting fixtures, remove curtain rods.
  • Peel off the old trim layer from the base base.
  • Seal gaps and deep cracks with putty.

    A siding ceiling will help to perfectly hide all the shortcomings of a rough ceiling, so you do not have to deal with careful alignment.

  • Remove traces of mildew, rust and mold with special compounds.
  • Apply acrylic primer in one coat to the ceiling.

If you make a wooden crate for siding, the beams should be kept in the room for a certain time before installing them on the ceiling, so that they have time to adapt to the room's microclimate.

Also note that you will need the following tools for the job:

  • A hacksaw for sawing wooden beams or scissors for metal.

  • Screwdriver.
  • Punch.
  • Building level.
  • Hammer.
  • Upholstery cord.

  • Pliers.
  • Roulette.
  • Marking pencil.


The key to successful work is a correctly drawn up drawing and markings applied to the ceiling. For this reason, take this stage with full responsibility.

Perform the following algorithm :

  • Measure all walls so that you have data on the length of each wall and the height of all corners.
  • Transfer all data to a paper sketch.
  • Mark the distance between the suspended siding structure and the sub-surface. In order to determine, be guided by the communications that are laid under the ceiling and lighting devices that you will build in in the future.
  • Draw a diagram on a sketch, while taking into account the distance between the ceiling profile - 0.

    8 meters and the fixing step using the self-tapping profile screws - 0.3 meters.

  • At the lowest corner, mark the distance from the base of the structure to the ceiling.
  • Transfer the marks to the other corners using a laser or building level.
  • Connect each point with a horizontal line, using an upholstery cord for this purpose.

  • Transfer the diagram drawn in the drawing to the ceiling so that it is clear where to install the supporting profiles.

Installation of the frame

After that, to the line obtained along the horizon along the entire perimeter, fasten the profiles or bars on the dowels. To do this, you first need to drill holes in the profile using a perforator, and then make recesses in the wall, in which the dowels will be hammered. Now it remains to attach the guide screws.

Important! Correct splicing of the starting profile should be done in each corner of the room.

If this is your first time doing this, practice on the unnecessary pieces of material first.

Now you need to be the direction of the panels for laying the siding on the ceiling. The lathing from the profile should be mounted across the location of the siding strips, and the distance between adjacent profiles should be no more than 0.4 meters. For the reliability of the suspended structure, use special hangers that will be attached to the rough ceiling.

Using a nylon thread or fishing line, control the evenness of the system, for this you will need to adjust the height with the suspensions.

Panel installation

Before you start fixing panels, you should prepare them for further installation under lighting fixtures. To do this, cut holes of the required size with metal scissors. When laying the first panel on the frame, insert its edges into the grooves of the starting profile. The next part should be well measured, and then attached to the structure.

Then repeat everything over and over.

Please note that you should not save time and measure carefully. If all panels are cut to the same length, they may simply not fit into the profile, or even be shorter than the distance between the opposite walls.

Before installation, the last panel should be cut not only in length but also in width. In this case, the cut side should be attached to the bearing profile, and pressed whole against the adjacent element.

We considered the option of fixing panels in a room with a width of no more than 3 meters, that is, with a standard length of vinyl siding panels. If you have a larger room, you will need to nail a wooden bar made of wood in the center of the ceiling, and it must be located perpendicular to the panels. On the ceiling, the siding must be attached with screws, nails or staples from a construction stapler. So the structure will be reliable and will not sag over time.

How to attach siding - recommendations

We recommend that you take into account certain recommendations, and then you can avoid mistakes that are associated with the choice material and its setting:

  • Laying siding on the ceiling - instructions, nuances, photos Choose light colors for the panels if the room has a low ceiling.

  • If you decide to install a frame made of beams under the siding, then before starting work they should be treated with an antiseptic and fire retardant so that the material is protected from fire and decay.
  • Leave a small gap (about 0.5 cm) between the wall and the panels on each side. In this case, the material during use will not sag and deform due to exposure to high temperatures.
  • Measure each panel of siding carefully, do not use standard cutting templates.

    Even with a deviation of 0.1 cm, the construction may be uneven.

  • To insulate the ceiling space, use rolls of insulation material that will be firmly fixed to the rough ceiling. In this case, the load on the panels will be minimal.
  • In rooms that are characterized by a high level of humidity, use only plastic dowels as fasteners.

    They are not afraid of moisture, unlike metal or wood.

  • Cut siding only with a grinder. In this case, the material will not crumble and break, and the cut will always be neat and even.

All of the above tips and tricks will help you create a beautiful, strong and high-quality siding ceiling covering. At the same time, you will not need to spend a lot of money and time on work, and care for the ceiling will be extremely simple - wet cleaning.

( 1 grade, average 1 of 5 )