Standard dimensions of polycarbonate sheet: width and length
At the moment polycarbonate is one of the most modern materials for construction, which is mainly used for building fences, greenhouses, canopies and awnings. There are several product variations that differ in design from each other.
When shopping, it is recommended to pay special attention to the standard size of a polycarbonate sheet, namely its thickness, length, width and weight.
At the moment, you can find several types of sheets on sale polycarbonate:
Each option has certain characteristics that must be considered before making a purchase.
Such kind of material as cellular polycarbonate is actively used in order to erect structures for various purposes. As practice has shown, the dimensions of cellular products for construction and their reasonable price make it possible to use this type of building material not just for building unheated and heated greenhouses, but also for facing facades of buildings and structures, which will be facilitated by a beautiful appearance and a wide range of colors. Due to the low weight of the product, the load on the metal frame will be small, moreover, the building of the greenhouse will have a high strength level.
This demand for material for construction is due to the fact that honeycomb-type products, unlike other varieties, have stiffening ribs and cells, which makes it possible to give the finished product a high degree of strength and make it as light as possible. It is very important that the width of the polycarbonate roll fully corresponds to the standard dimensions of the sheet-type material.
If you consider the standard sizes of monolithic polycarbonate, it is important to note the fact that the sheets will go on sale in size 2 . 05 * 3. 05 meters.
The thickness of the products used can be varied in this case from 0.2 to 1.2 cm. Moreover, a feature will be the fact that the monolithic version has a much higher light transmission capacity than the cellular type products. It should be remembered that the monolithic version of the product will cost much more, but at the same time its visual appearance is much more beautiful.
In addition to the usual sizes, the number of layers is also required. Thus, this type can be marketed as a single-layer or multi-layer type. On the construction market, you can find tinted, colored and even embossed building material of this type. As practice has shown, the embossed look is perfect as an element of a decorative type when creating a room design, or a piece of land.Among the technical parameters, the following points can be noted:
As you can see, monolithic materials in a standard size are perfect for decorative building materials. Please note that the dimensions of monolithic type polycarbonate (1 cm) are 2.
05 * 3. 05 meters.
The length and width of polycarbonate can be different. When choosing a suitable option, it is required to take into account the fact that the profiled variety has higher technical parameters than the monolithic and honeycomb. As practice has shown, the structure of profiled type products will fully correspond to the monolithic one.
A distinctive feature is the wavy shape, as a result of which the building material acquires an additional strength level due to the presence of stiffeners. This option will be an excellent choice in order to equip roofs and awnings. Due to the fact that the waves on profiled products fully correspond to the waves on metal tiles, which, if necessary, these types can be combined. It is extremely important that the thickness of the polycarbonate and its other dimensions fully depend on the purpose.
At the moment, this type of construction products is actively used for construction and construction.
On the market for services and goods, you can find cellular polycarbonate of a standard size. Usually in such situations the width can be 2.1 meters, and the length of the used building material can be 2-12 meters. Most experts recommend that during the acquisition process pay special attention not only to such parameters, but also pay special attention to the thickness. Moreover, it is required to take into account that the selection of a suitable material fully depends on where exactly it will be used, in what conditions it will be used.
If we consider the most popular sizes, then in this case it should be noted that the most popular are the sheets of products with a thickness of 0.4, 0.6, 0.8 and 1 cm.
Which width can be polycarbonate
When choosing a building material, it is necessary to take into account all dimensions, including the width of the polycarbonate sheet.
In this case, everything is as simple as possible and there should not be any special difficulties. This is due to the fact that the indicator will be fixed, and the width of the sheet is 2.1 meter. Most people wonder why these sizes were chosen.The reason is that in the operational process, sheets tend to expand if the air temperature starts to rise, and when the temperature decreases, the material will return to its natural form.
If the width is much larger, then the difference in size during the expansion process will be quite noticeable. Moreover, narrow sheets are not so convenient during the installation process. Thus, 2.1 meters is the optimal polycarbonate width because it is quite easy to install.
How thick can polycarbonate be
Another size of the honeycomb-type polycarbonate sheet that must be taken into account in the purchasing process is thickness.
The most popular steel sheets, which have a thickness of 0.4 and 0.6 cm, as a rule, this option, and this option is perfect for building greenhouses and single-pitched roofs. If you make a choice of finished products from the manufacturer with a thickness of 0.8 cm, then it can be used to build gable and pitched roofs.
When it is planned to build a greenhouse, which will be used even in the winter season, then you should make a choice in favor of a material with a size of 1 cm.For buildings of a serious type, for example, verandas or gazebos, on which there will be a lot of snow on top in the winter season, you should choose finished products with a thickness of 1.6, 2, 2.5 or 3.2 cm.
How long can polycarbonate be
If we take into account the usual dimensions of cellular polycarbonate during the purchase process, then it should be noted that this type of building material will enter the commodity market for sale in several variations. Thus, the length can be 6 or even 12 meters. It is important to understand that the dimensions of the widths in each individual case will be identical and amount to 2.1 meters. Although the manufacturer ships material in a standard size, often other sizes may be required that are very different from the standard ones.
In such situations, you can order material cutting to individual sizes, which makes it possible to obtain sheets of the required width and length.
We have considered the standard size of a polycarbonate sheet, but it's worth talking about weight separately. Most experts advise to take into account the fact that the dimensions of cellular products are not a single parameter that must be taken into account when buying. All dimensions and weights should be clarified, and this is due to the fact that in the process of creation, manufacturers can melt products in finished form in such a way that ultimately, the internal types of partitions are as thin as possible.
As a result of this approach, the cost of materials for construction is greatly reduced, the market price for finished products from the manufacturer will also be much lower.
But here one should take into account the fact that products with these dimensions will have a lower strength level when compared with similar materials with a standard size. These types of building material are not recommended in the future to be used in order to erect structures. A product with thin walls is perfect for southern countries, where in winter there will be very little snow on the structure and the load will be minimal. As practice has shown, the weight of a finished type of product fully depends on the thickness of the products used.
If required, standard conformity of dimensions, or rather, thickness in relation to weight per square meter, can be considered:
- Polycarbonate with a thickness of 0.
4 cm has a weight of 0 .8 kg per square meter.
- Polycarbonate with a thickness of 0.6 cm has a weight of 1.3 kg per square meter.
- Polycarbonate with a thickness of 0.8 cm has a weight of 1.5 kg per square meter.
- Polycarbonate with a thickness of 1 cm has a weight of 1. 7 kg per square meter.
If required, you can buy lightweight polycarbonate sheet. In this case, there will be a special marking on its surface.
Good advice! Since not all manufacturers are honest, in the process of buying polycarbonate, it is required to carefully study all sizes to the maximum, then that production standards may be violated, and the material sold will not correspond to the usual dimensions.
As practice has shown, very often unscrupulous manufacturers, as well as sellers try to issue material with low quality as a clothed version with high parameters of a technical type. In order not to be deceived, it is recommended to select well-known manufacturers, and it is natural that the price of this material will be slightly higher, but in this case, you will be sure that the declared characteristics fully correspond.
Moreover, the warranty period is of no small importance, and it is best if the warranty becomes 10-15 years.
It still does not hurt to ask to get acquainted with the certificates of conformity of product quality in finished form. You can find out in advance how the manufacturer protects his goods from counterfeiting. Please note that the optimal thickness of monolithic material for roofing is 1 cm.
The usual size of a polycarbonate sheet is what you need to take into account at the time of purchase .
.. This is due to the fact that in the market for services and goods, you can find unscrupulous manufacturers who indicate the wrong sizes, thereby misleading potential customers. Most experts advise you to first understand what exactly polycarbonate will be used for, how it will be used in the future, and only after that take into account the dimensions that the building material should have.
Posted By: Work Style |09, Nov 2020
Posted By: Work Style |09, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |04, Nov 2020