Length, width and thickness of siding- Types and sizes + Photo and Video

Length, width and thickness of siding- Types and sizes + Photo and Video Length, width and thickness of the siding. The selection of material for outdoor decoration is often based on savings, maximum presentability and efficiency of decoration. From this position, the ideal choice would be to clad the house with siding, the thickness of which gives a relatively inexpensive and even reliable in terms of performance coating, which has a rather spectacular appearance.

When planning the decoration of a house with siding, find out all the questions that concern you - operating parameters, properties, and also as much as possible clarify everything that concerns the material itself. This will make it possible to buy exactly the material that is best suited for your case, and in the amount that is required.

This will help avoid additional costs and help reduce installation time.


There are many types of material such as siding.

First of all, the main types of siding should be distinguished:

In addition, in the category of wall panels there is a division into:

  • Horizontal. The most commonly used type of panel, which has a horizontal arrangement and is fixed from bottom to top. The main type of imitation is wood, as it is the noblest natural material.

  • Vertical. Panels are placed vertically and positioned from left to right or vice versa. Most often they are performed with imitation of masonry.

Please note that facade siding is most often made in imitation of walls that are made of wood (logs, timber, ship board), and basement panels are most often made in the form of stone or brickwork.

The most important division of material is its type.

At the moment there are samples from the following types of material:

  • Metallic.
  • Fiber cement.
  • Wooden.
  • Plastic.

With all this, the materials have their own subspecies - for example, wood siding makes them stabilized or pressed wood, and plastic can be of acrylic or vinyl type and so on.

But all the properties of panels of the same type are the same, which makes it possible to speak of them as a single group.

Siding dimensions

Vinyl siding panels

Are the most demanded among buyers.The reason for this was the relatively low price, simplicity and ease of installation work. But the disadvantages include the fact that the material is quite fragile when freezing and has a high coefficient of thermal expansion.

At the same time, the specificity of use makes it possible to come to terms with the obvious shortcomings, and the high level of imitation of wood - panels for timber, brick, log, "herringbone" and "ship board" - create a magnificent appearance of home decoration.

Dimensions, and especially the thickness of the siding panels, may vary slightly depending on the selected manufacturing company, and the average is:

  • Length - from 250 to 380 cm.
  • Thickness - from 0.07 to 0.12 cm.
  • Width - from 20 to 30 cm.

  • Profile thickness - from 1.2 to 4 cm.
  • Weight - from 1.5 to 2 kg / panel.

There are single, double and even triple panels that are marked with the letters S, D and T, respectively.

The numbers next to it represent the width in inches.


Metal sheathing was unanimously recognized by experts as the most stable and durable, but high prices (which are about twice as high as similar vinyl panels) significantly reduce demand.

In general, vinyl and metal samples have quite similar parameters, both in relation to the profile and in size, because vinyl materials are often duplicates of metal products.

Sizes :

  • Length, width and thickness of siding- Types and sizes + Photo and Video Length up to 800 cm.
  • Thickness - from 0.

    05 to 0.11 cm.

  • Width - from 21 to 37 cm.
  • Weight - about 4-5 kg ​​/ m 2 .


Basement panels (sometimes they are even called facade, which can create confusion) were originally intended for cladding the lower part of the house, but quickly enough they have become a specific finishing agent for both indoor and outdoor work.

In aesthetic terms, such material can give odds to any other sample, and the features of the shape of the material to some extent help to facilitate the installation work. Types of basement siding are available both in vinyl and in metal, although initially it was only metal.

Basic parameters :

  • Length - from 79 to 125 cm.
  • Width - from 45 to 60 cm.
  • Thickness - 0.

    1 to 0.3 cm.

  • Height - 2.6 cm.
  • Weight - 1.

    8 to 2.5 kg / panel.


Length, width and thickness of siding- Types and sizes + Photo and Video The ceramic type of siding came to Russia relatively recently from faraway Japan, where it has been successfully used for about 50 years. The material has a porous structure, in particular due to the cement composite, which has been hardened in an oven.

Interestingly, given the thickness of the ceramic type siding, according to the manufacturer, the service life is 30 years.

The panels are of really high quality, but for this type of cladding the price is up to 8 times higher than for other types, therefore, in practice, the use of ceramic samples is very limited.

There are different types of imitations - stones of all kinds, as well as bricks and wood. The installation of such material has a certain specificity and is recognized as difficult, which does not make it possible to carry out all the work with your own hands. You can run into problems "tightly" when installing on higher floors, in particular due to the heavy weight of the material.

Basic parameters:

  • Width - from 45 to 90 cm.

  • Length - 300 cm.
  • Thickness - 1.4 cm.
  • Weight - from 18 to 20 kg / m 2 .

Ceramic siding is a novelty, therefore there are few reviews about it, and statistics of use in the climatic conditions of Russia are not collected.

Fiber cement

Cement panels are a kind of ceramic, but with a slight difference in the manufacturing method. Fiber cement panels contain cement, sand, cellulose fibers and water, and the fibers are used as a reinforcing additive.

The material is very similar to ceramic samples and has practically the same properties. At the same time, the choice of forms is rather scarce - most often such panels are presented in the form of oblong narrow panels for horizontal mounting, which are decorated in the form of wooden slats.

Basic parameters:

  • Width - 19 cm.

  • Length - 360 cm.
  • Weight - 10 kg /panel.
  • Thickness - 1 cm.

The demand for fiber cement siding is relatively small, the reason for which is the lack of awareness of buyers about this type of cladding. Nevertheless, you will be able to predict and understand that low demand is a consequence of high prices for this material, and most often people are forced to look for cheaper options.

Wooden siding

Length, width and thickness of siding- Types and sizes + Photo and Video The second name of the wooden siding is "Canadian" - it the progenitor of all existing types. Siding was originally invented in Canada and made from wood (hence the name). Today, wood siding, the thickness of which inspires confidence in everyone, is panels made of stabilized (compressed) wood.

Such a tree has been treated with special means that will help stop the shrinkage or stress build-up of the material. Wood siding has several types of profile and installation methods - from the usual lining to overlapping.

The material is rather capricious, prone to mold, various insects and so on can grow in it. It needs regular staining and treatment with antiseptics and fire retardants.

Demanding wood panels for timely maintenance and a large price difference depending on the type of wood are the weak points of wood panels.In addition, this type of material is combustible, which significantly reduces the competitiveness in the building materials market.

Main parameters :

  • Width - 15 cm.

  • Length - from 330 to 350 cm.
  • Thickness - from 1.5 to 4 cm.

Important! The dimensions of wood siding can be with a wide range of values, depending on which manufacturing company was chosen. Experts advise using wood panels with a thickness of no more than 2 cm and a maximum width of 15 cm.

This limitation was set in order to reduce the risks of warping of the material, which, despite all precautions, is a common problem with any type of wood cladding.

Steel / Aluminum

Galvanized (steel) siding has high strength and resistance to such a negative factor as corrosion. Operational qualities make it possible to rank it among the most durable and stable types of cladding, but the picture is spoiled by a rather high cost. And nevertheless, according to a certain demand for the material, as well as from the advice of a professional, one can understand why the demand is stable.

Aluminum panels are many times more expensive, which greatly reduces the percentage of sales and use.

It will be too expensive for private traders, mainly this type of material is used in commercial and public buildings.

Basic parameters:

  • Length - from 50 to 600 cm (galvanized), up to 600 cm (aluminum).
  • Width - from 20 to 25 and in the second case 30 cm.
  • Thickness - 0.1 cm (steel), from 0.

    05 to 0.06 cm (aluminum).

  • Weight - from 2.4 to 3.5 kg / m 2 (aluminum), and up to 10 kg / m 2 (steel).

Please note that metal siding remains the best option among consumers, but the need to save parts reduces this issue and neutralizes the positive qualities of the material.


The use of siding implies careful calculations of the required amount of material, since with late additional purchases there is a danger that the panels will not will match each other in color. The data presented in the article are averaged, and they may differ greatly from the materials offered for sale due to the constant updating of the assortment, as well as the appearance of new models or technological nature from the manufacturer.

In order to eliminate mistakes, we advise you to know the total area for cladding the walls of the house when buying, so that you can immediately calculate the required amount of material on the spot. Also, do not forget about a certain margin in case of errors during cutting, changes in design data or accidental damage.