Life hacks with self-tapping screws and other unusual ways of using them

Life hacks with self-tapping screws and other unusual ways of using them Life hacks with self-tapping screws and other unusual ways of using them

Self-tapping screws are fastening elements familiar to every person. There are also many life hacks with self-tapping screws, but first we propose to briefly consider what these elements are. The word "self-tapping screw" is on everyone's lips and many know what it is.

Craftsmen use them in repair, construction and even just in everyday life, and in stores such fasteners are sold by weight and by the piece.

In construction markets there is an incredibly large selection of self-tapping screw elements that differ in purpose, size, material of manufacture.

When buying self-tapping screws, competent buyers are guided by…

… certain tasks that such items should solve. Initially, you can trace a logical parallel - for metal, you need to use self-tapping screws for metal, for roofing, roofing, and for wood, those that are adapted for work on materials of natural origin.

Please note that there are several varieties of self-tapping screws, and the choice will depend on the specific purpose. The main parameters by which this type of fastening can be determined are the manufacturing method (which will determine the resistance to corrosion), as well as the pitch of the threaded spiral (it differs for different materials) and dimensions.

Details

Types of self-tapping screws according to the manufacturing method

Regardless of the type of product, they are made of brass, stainless steel, or carbon steel with an increased degree of strength:

  1. Life hacks with self-tapping screws and other unusual ways of using them Phosphated - these types of fasteners have a matte black color due to phosphate treatment.

    Black self-tapping screws have minimal resistance to corrosion, but they can be easily screwed into any material. They are the cheapest of all. They are used for both wood and metal, but in the second case, only where they will not be threatened by a high level of humidity, for example, in a room where partitions are made of drywall sheets.

  2. Oxidized - they are also black, but with a shiny surface, and due to the presence of an oxide film, such screws are more resistant to corrosion.
  3. Chrome plated - they are treated with chrome acid, and they also have a silver color.

    Chrome-plated stainless self-tapping screws are scratch-resistant due to the protective film, and they are also decorative and are used in a conspicuous place.

  4. Galvanized are self-tapping screws for wood, which have a yellow or silver color, depending on the type of zinc alloy that will cover the product. The zinc layer will provide high resistance to rust, and such self-tapping screws can also be used for any premises and structures, however, and they are much more expensive.

  5. Yellow passivated - in addition, in addition to galvanizing, they have another layer of protection, which is formed by processing with chromic acid.This type of fastening is resistant to mechanical damage and corrosion.

    Self-tapping screws of yellow color for wood are used in cases where fastenings with decorative qualities are required, for example, for assembling pieces of furniture (with fittings of the color you require).

Please note that when choosing self-tapping screws as fastening elements in order to connect wooden structures, you should take into account the level of humidity that will affect them. For service in an open space or even in a damp room, it is worth buying a chrome, galvanized or even yellow passable version.

Little-known life hacks

Yes, homework is definitely not complete without fasteners, screws and even self-tapping screws. Hardware can be useful for any process - repair, decoration, fixing elements, as well as for cladding.

And in order to simplify the work and make it a little easier for the masters, we will reveal to you some tricks, or rather life hacks with self-tapping screws.

When the self-tapping screw falls out

If the hole is large and the self-tapping screw falls out of it, then insert a pair of toothpicks or even matches into the hole. Next, they should be broken off at the level of the surface of the die, and then screw in the self-tapping screw so that it holds tightly. To prevent the matches from popping out on the other side, the hole should be better covered with chewing gum or even insulating tape, and after the end of the work, you can peel everything off.

If the hardware falls off the screwdriver

Life hacks with self-tapping screws and other unusual ways of using them When screwing self-tapping screws into difficult zones, self-tapping screws often break off from a tool such as a screwdriver.

To securely fasten them, a small piece of insulating tape is enough for you - wrap the hardware to the working surface of the screwdriver, and after that they will definitely not go anywhere.

Interestingly, magnetizing the bit head is a more complicated option. To do this, you can use small magnets from old headphones, and all that remains is to fix it on the bit, and then attach the hardware to it.

Screwing into wood

When you need to screw self-tapping screws into solid wooden dies, but nothing goes or there is simply not enough drill length for drilling, not use a long drill immediately. A candle or soap will help you here - rub the foot of the self-tapping screw, and it will enter dense wood like clockwork.

Life hack with a soap dish

To prevent the soap from popping out of the soap dish, screw 2 small screws onto the bottom of the container. After that, a piece of soap will be conveniently held on the tips of the legs, and it will not slip out of the small container.

Hide the head of the element

To prevent the self-tapping screw from looking out of the finished product, it must be bitten off or even cut down. And if there is no saw or wire cutter at hand, then it is better to hide it. To do this, use a broken drill to enlarge the hole for the self-tapping screw, and then drown the hardware a little deeper into the die.

Thanks to such simple actions, the hat will not be visible, and the hole can be covered with putty or even covered with a cork.

Unscrewing a self-tapping screw with a torn off head

A completely torn spitz will need to be reinforced. To do this, you need to drip melted solder onto the cap, let it grab and unscrew it with a straight-head screwdriver. The cross will definitely not work here, and the solder will begin to soften, but the straight line does it perfectly.

We clean the fish

If you need to quickly clean the fish from the scales, and there are no kitchen accessories at hand, then you should take about a dozen self-tapping screws from which is a small leg.

After that, the hardware will need to be screwed in random order into the plate, and it will be possible to clean the fish. Hats are able to remove even very dense scales, and the length of the legs will not cause inconvenience, and you will definitely not hurt your fingers.

Excellent protection against ice

We offer you another interesting life hack with a self-tapping screw. Walking on ice is still a pleasure, and if you screw a couple of short self-tapping screws into the sole of your boots or boots, then walking will become much more pleasant and safer. By the way, it is best to practice on unnecessary winter shoes so as not to spoil the "running" pairs.

And one more trick

To fix the profile sheet with self-tapping screws, or attach roofing material / thin flooring, the installation area should be grease with oil, and then the coating will definitely not crack. And to strengthen the hardware, we put a piece of leather under the hat, if you don't have thin washers.

How to put self-tapping screws in a row

Small-sized hardware is convenient to hold with nippers, but it will be difficult to screw in. If you need to work with self-tapping screws and install them with precise steps in a row, then a comb is perfect. The distance between the teeth is the same, and it will be possible to read the step of fastening the elements from it.

And so that the comb does not move, you should fix everything on the surface with extreme screws.

Conclusion

Such simple recommendations when carrying out repair, construction work, creating furniture and home improvement will definitely be useful. And one more bonus for you - so that the fasteners are always nearby, you should throw a magnet into your pocket, stick fasteners on top, and they will literally be always at hand.

( 12 marks, average 2.67 of 5 )

.