linden or aspen, cedar or larch

linden or aspen, cedar or larch What wood is better to build the bathhouse from: cedar, larch or linden

Before the start of the sauna construction process you need to decide on the material, that is, from which wood it is better to build a bath - linden, aspen, cedar or alder. There are actually a lot of wood options for wall surfaces and finishes, and they are all attractive and interesting in their own way. Each tree variety has certain advantages and disadvantages, and therefore it will not be competent to use only one of the species, for example, only linden. Even if it seems that the wall cladding of the steamy aspen is no better than the cedar finish.

General information

How to competently compare materials

Naturally, time and financial resources and universal solutions.

For example, build a cedar bathhouse, preferably Canadian, and use African oak to decorate the steam room. Even with a properly drawn up project, steaming in such a bathhouse is not much more comfortable and better than in a simple one, but it will last 10 times more than an aspen frame or a larch building.

A different box will be extremely expensive. There is a possibility that it is better to build 4 full-fledged saunas made of linden and cedar pine with the money spent on the bathing arrangement. The wood that is used for the construction of a sauna can be roughly divided into the following 3 categories:

  • Wall block, or bars.

  • Material for arranging the wettest places in the sauna room.
  • Finishing materials for shelves, wall surfaces of steam rooms and bath accessories.

This division did not appear by chance, and usually a certain type of wood will perform best in certain conditions. For example, larch or oak are better suited than alder or pine for a bathhouse when it comes to building a log house or building box. At the same time, heavy acacia, oak or birch should not be used to decorate the walls of the steam room.

The denser the tree is, the more it will burn the skin, and birch boards are capable of emitting bitterness.

What you should pay attention to

When choosing a material for construction, in addition to the cost and tactile perception and wood surface when touching, you need to pay attention to such 3 important moment:

  • Decorative scent and quality.
  • Resistance of the material to high temperatures and moisture.
  • Wood machinability.

There are certain outsiders and leaders in all categories.

For example, aspen and linden have the best workability, and larch and cedar are considered to be resistant to moisture, and abasch and alder are the most beautiful and pleasant to touch. Naturally, there are universal tree species, and the qualities of which are no better than those of the leaders, but they can be applied to a certain extent for all bath details. These materials include larch, aspen and cedar.


Aspen baths, advantages and disadvantages

At first it may seem that aspen is no better than cedar, or, for example , beautiful alder. You can understand the choice at least by the fact that in ancient times most of the chopped-type baths were built from a special, selected aspen log.

In modern and comfortable steam rooms, aspen is used in those places where it would be better to lay expensive mahogany or plastic. At the same time, as the reviews showed, an aspen log house for a bath without processing could stand in a damp and swampy area, where only oak and larch would adapt.

Please note that aspen is a very capricious material that requires special attention and approach. Especially when harvesting a log and preparing it for installation in a bath box.

But with the right approach to materials, in the hands of an experienced craftsman it is better than aspen for building a bathhouse to be found.

Why is aspen better than other species in bathing conditions?

The best wood for a bath is aspen. Such a tree grows on waterlogged soil, and therefore its structure consists of intertwined thin fibers, very viscous and dense. To build a bathhouse, use tree trunks that are 40 years old, and they must be carefully selected and rejected. After the winter drying, the logs need to be cut and assembled into a log house, while they should be built quickly, joining the crowns in the corners "in the paw". Very quickly, a log house made of aspen for a bath shrinks, the tree becomes strongly compacted and hardens, it becomes extremely difficult to cut it.

The advantages of aspen include the following properties:

Please note that in this case, aspen will have a very high degree of strength, lagged beams, door frames, ceilings and window openings are made from bars and boards.

Quite often, the aspen blockhouse is not even revetted inside the additional decoration. Moreover, the craftsmen say that it is better to leave the aspen crowns open. It is believed that aspen heated from steam begins to secrete special substances that perfectly tone up breathing and skin. The popularity of the bathhouse made from aspen is so great that unusual medicinal qualities are attributed to its influence, while there is no resin and phytoncides, like conifers, there is no aspen wood.

Why is aspen inconvenient for bathing arrangement

The main disadvantage of aspen wood can be considered the difficulty in choosing high quality material. aspen, like no other material, must be carefully selected and rejected. The better the dropout rate, the longer the bath complex will last. If you come across a log with foulbrood, then there is a possibility of infecting the entire structure before the aspen becomes insensitive and dense to rot. The second disadvantage is considered to be the darkening of the surface under the influence of sunlight and air.

To restore the original light appearance to the aspen bathhouse, it is best to grind the surfaces or process with a sandblasting machine.

Linden and aspen baths

Both of these materials are considered the most affordable and tedious for interior decoration of the sauna, steam rooms and dressing rooms. Benches and shelves are usually made of linden, because under the conditions of a hot steam room, a linden soft bench will always feel even cooler to the touch than aspen, especially after several years of operation in a humid environment. How to distinguish aspen from linden? Quite a simple question, but very important when it is required not to confuse the materials used for finishing the steam room and the door sauna blocks. Freshly planed linden and aspen boards and slats are almost indistinguishable in texture and color.

Aspen has a more pronounced fiber pattern and a slightly lighter, even gray, surface tone. Linden can be distinguished by its specific aroma, and sometimes the masters check the maturity and dryness of the material with a honey drop. On the aspen, it begins to spread and absorb, on the linden it will remain in the form of a small droplet. Naturally, linden is useful only for cladding and pieces of furniture for the steam room, and it makes no sense to build a frame or frame of a bath from it.

In some cases, the customers of the bath are wondering which is better, linden or aspen in the steam room.

Both of these materials are almost equal, and they both begin to darken after dirt and water. Only linden will absorb everything that is washed off, but aspen begins to oxidize and become stained. In two cases, the texture and colors can be restored. If you need to make a choice between aspen and linden, it is better to remember the unique qualities of aspen wood to get rid of pathogens. In the old days, upholstery and tubs were made from it for clean drinking water, which did not bloom and did not grow cloudy.

Alder bath

If you think about what is better for a bath - aspen or linden, then it is worth considering another option. Alder texture, unusual and beautiful, can vary from pink-yellow to rich, almost orange shades and colors. Alder, along with aspen and linden, is beginning to be included in the TOP-3 materials that are most often used to decorate a steam room in a bath complex. According to user reviews, alder for a bath room is a difficult material:

  • Low degree of wood durability, but there can be no chips or cracks in the bath decoration.
  • Easily absorbs water, but after being stained for a long time in water, it gains strength, like metal or bog oak.

  • It is bad to tolerate overheating, but the aroma of a smoldering splinter or heated wood is considered very pleasant, partly even exquisite.

Fresh, sawn alder that is almost white in color, like aspen or poplar. After drying in air, the surface acquires an orange-red hue, and after treatment with an ammonia solution it obtains a very beautiful color and texture. Alder veneer is used in saunas as a method of imitation of mahogany. For decorative purposes, a well-crafted alder surface looks much better than real mahogany, walnut or chestnut.

If it is required to provide a pronounced effect of therapy, then black alder is better suited for the bath room. It, like aspen, emits many volatile substances, and also has a beneficial effect on the upper respiratory tract.

Bath room made of larch

linden or aspen, cedar or larch All conifers are considered to be the most suitable for building walls, ceilings and floors. A larch bathhouse can be easily distinguished from a cedar or pine structure by its darker woody color. The cedar bath looks light, with a yellow tint.

The larch tree is popular for its incredible resistance to mold and putrefactive pathogens. Boards and planks perfectly withstand alternating loads at a high temperature level, under conditions of high humidity, and therefore a larch log house will be the most durable and durable.

The construction of a bath room from larch, without additional processing, has the stability and strength, as in stained modified aspen. Larch is ideal for insulating battens, log beams, ceiling slabs, wherever constructional bath elements come into contact with hot, humid steam.

The only thing in which larch is worse than aspen is in its tendency to chips, cracks, chips, and when heated strongly, resin is released, to which you can stick.

For this reason, I do not use it on furniture and the floor of the steam room. Larch cladding has a tart resinous aroma that never goes away, even after 5 years of use. A lot of modern projects - a cedar log bath.

Relatively affordable and inexpensive pine wood from Siberia is the optimal material in terms of cost and quality. Unlike larch or aspen, cedar will be cheaper, it will be better processed by machine tools, and therefore it has become the most massive building material for bath rooms.

A material that has a large amount of resin with a pleasant, non-irritating scent can cause allergic reactions. For this reason, it is best to use cedar for a steam room that has been bleached with hydrogen peroxide. The cedar steam room is inferior to the aspen room in the richness and durability of the atmosphere.


It is quite difficult to figure out which wood is better to build a bathhouse from, and often personal tastes and preferences play a decisive role when choosing a material. But in terms of operation and durability, black alder and aspen remain the complete leaders in the list of the most affordable materials for finishing a steam room.