The hood in the kitchen is an integral attribute, the main task of which is to cleanse the air from odors arising during the cooking process food. The hood is equipped with a ventilation pipe, which can be of various configurations and made of different materials. In the process of installing the entire structure, the question arises - how to hide the ventilation pipe in the kitchen? After all, the corrugation protruding from the ceiling is not quite aesthetic.
Nowadays there are circulation hoods at the choice of buyers, the main function of which is to purify the air using a filter and return it to the room. Such hoods do not require the installation of a ventilation pipe, so you don't have to hide anything.
The purpose of the flow hoods is to draw air through the ventilation pipe into the shaft. Air purification is much more efficient, but there is a need for a pipe and connection to the ventilation shaft.
It often happens that the shaft is located on the opposite side of the kitchen area, and imagine how much the simplest ventilation duct will have to pull, and how it will look in its naked form. Therefore, the question of how to hide this pipe remains always relevant. Of course, the corrugation can be replaced with a rectangular or round plastic duct.
To connect short elements, adapters are used. Despite its visual appeal, the plastic pipe has the disadvantage that it loses traction along its entire length. This option is suitable for those cases when the ventilation is located near the hood.
There are several ways to hide an unsightly ventilation pipe for an exhaust hood in the kitchen from prying eyes:
If necessary, you can paint it in any color.
The corrugation is carried out tightly to the wall on top of the cabinets, and it is hidden with the help of the cornice on the furniture.
Corrugation can be painted in any color as long as it matches the style of the kitchen.
Note. When decorating a kitchen in high-tech style, you can not hide the corrugation, leaving it in a conspicuous place.
As you can see there are many ways to hide the ventilation duct for the hood in the kitchen, everyone can choose the one that best suits your kitchen.
If you don't like the look of the corrugated chimney, you can replace it with a plastic box.
They are sold mainly in white; if you wish, you can finish the ventilation duct in the kitchen. But, as mentioned above, it is advisable to use this option in the case of a close location of the ventilation hole and the hood. The easiest way is to replace the corrugation with a plastic duct. If the sleeve has to be made long, through the entire kitchen, then the best solution would be to cover it under a stretch or suspended ceiling.
There is no need to call a foreman to install a chimney in the kitchen, you can easily handle it yourself.
In addition, if there is a task to mount a drywall box, various specialized Internet resources have detailed instructions on how to do this, and you can also watch a video on this topic. To install stretch ceilings, you still have to use the services of masters. Of course, if you yourself are not.
Note. In order to camouflage a corrugated pipe, different materials are used: drywall, wood, plastic, metal.
Structures, the main task of which in covering the air duct is to reduce noise from the hood motor. In addition, the requirements for aesthetics have not been canceled.
Also, materials must be resistant to high temperatures, moisture, exposure to chemicals, sunlight, easy to clean.
In order to hide the ventilation pipe in the kitchen, it is necessary to determine the type of material used, as well as prepare the necessary tools and fasteners.
So, you need to assemble such a set tools:
Before buying, be sure to take measurements and make calculations in order to buy the required amount of materials.
The most commonly used construction for hiding the ventilation duct in practice is a plasterboard box. Before proceeding with the task, take measurements of the duct and the territory. You can also sketch the drawing on a piece of paper for clarity.
Use a pencil and ruler to mark up. Further along the ceiling and on the wall, fix the metal profile with dowels, and using self-tapping screws, you can fix the segments in a vertical position.
The corrugated pipe is fixed in the opening of the hood and ventilation shaft, placing it in the designed frame. Then plasterboard is carried out using self-tapping screws. After the completion of the installation work, the finished plasterboard box can be finished at your own discretion.
Corrugated duct is a soft product with low weight. It is made of aluminum.
The pipe bends perfectly, stretches, easy to install. When installing, stretch the pipe as far as possible so that it can then be easily cleaned of accumulated dirt and dust, which will certainly collect on the ribbed surface. The section of the pipe must correspond to the diameter of the hood opening and ventilation shaft.
A plastic cylinder with a return valve is mounted in the hole. The end of the pipe is pushed onto the cylinder and fixed with a clamp. The remaining end of the pipe is connected in the same way to the opening of the ventilation shaft. In order to check the correct installation and operation of the hood, turn it on and attach the paper, if everything is fine, it will stick.
Making the installation of a plastic duct or corrugation, mistakes are often made.
In the process, make sure that the diameters of the inlet holes are consistent.Also, the cross-section of the pipes can be slightly large, but in no case smaller. Stretch the corrugation as much as possible, very often this is forgotten. The bend of the pipe should not exceed its cross section. When laying the plastic box, make sure that the corners remain obtuse.
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |13, Nov 2020
Posted By: Work Style |03, Nov 2020
Posted By: Work Style |09, Nov 2020