Materials for creation and styling technology + Photo and Video

Materials for creation and styling technology + Photo and Video Plastic garden paths are a type of coating that is ideal for use in the country. Due to the performance characteristics of plastic, the paved paths on the way to the terrace, garden, pool will delight for a long time.

Types, advantages and disadvantages of garden paths

Three types of paths are presented in specialized building stores:

  • parquet garden;
  • lawn grill;
  • modules.

Garden parquet

Materials for creation and styling technology + Photo and Video Garden parquet has a second name decking . The material is made of plastic boards with the classic four-board pattern.

The product is made from wood flour and polyvinyl chloride in two layers. The upper layer is made of plastic and wood flour, and the lower one is made of PVC.

To form a height difference, products are equipped with sills. Plastic parquet is easy to maintain. It is not susceptible to the negative influence of moisture, does not grow moldy and does not rot.

Lawn grill

Materials for creation and styling technology + Photo and Video Place the lawn grill directly on the lawn ... The product has cells that do not interfere with the growth of grass.

With the help of the grates, you can refresh the appearance of the local area, moreover, it is convenient to move along the paths in rainy weather.

For production, they take green plastic.


Materials for creation and styling technology + Photo and Video Modular plastic tiles for garden paths are characterized by versatility. The material is suitable for laying tracks, forming a stable base under the table and chairs, for decorating landings.

The color gamut is varied. You can choose modules of any color and shape.

Differs in ease of installation, and just as easily disassembled if necessary.

Advantages plastic garden paths:

  • low weight;
  • affordable cost;
  • Materials for creation and styling technology + Photo and Video ease of installation;
  • no need to fill the foundation;
  • long service life;
  • durability;
  • tiles are not affected by atmospheric precipitation and temperature changes;
  • moisture resistance;
  • easy maintenance (no dirt accumulates on the surface);
  • wide colors;
  • anti-slip corrugated surface.

Disadvantages :

  • Materials for creation and styling technology + Photo and Video reaction to chemical substances (solvents);
  • rapid surface erasure;
  • tiles with a smooth surface are very slippery;
  • cannot withstand heavy loads;
  • fade in the sun;

Tips for installing garden paths

Quartz and sawdust are often added to the component composition for garden tiles in production to improve the strength of the material.

Materials for creation and styling technology + Photo and Video Tiles made of pure plastic eventually deteriorate under the influence of low temperature and mechanical stress.Such material is mainly used as temporary flooring, laid in buildings for household purposes.

The addition of quartz sand makes the material strong, able to withstand frost and heavy loads. The disadvantage of the material is considered to be an unattractive appearance. Paths are laid with tiles on the approach to the reservoir and in places with high levels of humidity. A harmonious combination can be created provided that the facade of the house is clad with siding.

Decking is made from polymer components and wood flour.

Externally, the material resembles a wooden board and is suitable for installation on terraces and open verandas. Products that contain only 25% of polymer components have a beautiful texture.

The disadvantage is a predisposition to the negative effects of moisture, due to the high percentage of wood content.

Installation of a garden path from modular coatings

In the production of plastic modules for garden paths, perforations are created on the surface, which ensures good ventilation. Each module is equipped with a lock connection, so the installation process does not take much time and resembles the assembly of a children's designer.

Materials for creation and styling technology + Photo and Video Before laying the modules, create a level foundation. For reliable fixing of elements, manufacturers supplement products with additional fasteners. This makes it possible to increase the resistance to stress. In order for the material to lie flat, the surface is checked for an angle of inclination, which should not exceed 5 mm.

The modules are designed in such a way that it can be mounted in any direction.

Laying is carried out both on a lawn and on a prepared concrete foundation. The installation time of the modules on the grass is no more than two hours.

For the winter, it is advisable to remove the covering, and to avoid weed germination, the soil is lined with a film.

An old dilapidated concrete walkway can be patched up with cement mortar or glue, and then the garden modules can be laid.

European method of installing plastic garden tiles

Polymer garden tiles with quartz sand can replace the usual paving stones.

The material is popular with summer residents, because it tolerates bad weather very well. Before you start laying the tiles, you need to dig a small depression and fill it with a mixture of sand and gravel, and set borders around the edges.

Materials for creation and styling technology + Photo and Video A solution with sand or gravel is used as a base, the choice of which depends on the strength of mechanical action. At the preparatory stage, it is important to take care of sealing the "pillow". Otherwise, moisture will seep through the tile joints, and the path will sag.

First of all, sod is removed from the ground with a layer of 15 - 20 cm. Then the surface is covered with sand and compacted tightly. Expanded polystyrene is laid on the prepared base - a heater that can withstand frost and high humidity.Perforated plastic tiles for garden paths are laid on top.

To prevent the release of unpleasant odors under the influence of sunlight, the path is occasionally sprinkled with water.

Installation of a garden path from a deck

The deck looks like a natural parquet. The material is made in the form of tiles from planks that are combined with each other. To prevent the accumulation of moisture in the gaps, create small gaps from 1 to 8 mm. The size of the gaps directly depends on the level of soil moisture.

Decking without gaps is used for installation on terraces.

Materials for creation and styling technology + Photo and Video The material, made of two parts, provides moisture removal and air circulation through the board. One part resembles a tile with narrow gaps between the boards, the other is a grid-like substrate, on which the tiles are connected into a single canvas. Decking is characterized by a long service life, which is about 15 years.

Before you start laying garden paths, you need to prepare the base. The surface must be firm and level, otherwise the substrate will sink into the ground.

To create a garden path using decking, prepare:

  • concrete mortar;
  • crushed stone;
  • boards;
  • decking.

To create a solid and rigid surface, before laying the garden board, it is poured with concrete mortar. This improves the quality of the coating. To form the edges, planks or decorative plinths are laid out on the sides.

Garden paths from lawn lattices

Materials for creation and styling technology + Photo and Video Products of this type allow without special problems to strengthen the lawn, for ease of movement on it.

The principle of work is identical to laying decking or tiles. Remove the top layer of soil, fill the depression with 20 cm high rubble, lay a waterproofing material and cover with sand 4 cm high.

The thickness of the sand and rubble pad depends on how the lawn is used. If only for the movement of people, then 15 - 20 cm is enough. In case of the planned placement of the car, feel free to increase the thickness to 50 cm.

The gaps between the gratings are filled with earth and sown with grass.

Watering is carried out once a day. There are lawn grates on sale that can be installed directly on the lawn, without preparation. Please note that this material is more expensive.

DIY plastic garden path

A limited family budget pushes to search for alternative materials for laying garden paths.

Plastic bottles will be a complete replacement for tiles. Even container lids are suitable for making tracks.

To make the process of arranging garden paths from plastic bottles with your own hands go like clockwork, prepare tools and materials in advance.

To work you need a bucket, scissors and a shovel. Prepare the surface first.

To do this, dig a ditch 20 cm deep, into which you put chipped brick, construction waste or stone. Then cover everything with sand and tamp.

Materials for creation and styling technology + Photo and Video It's the turn of the plastic bottles. First, fill them with earth or sand and lay them horizontally. In order to seal the structure, place a board on them and walk for 10 - 15 minutes.

Knead a sand and cement based grout to fill the spaces between the bottles. After the solution has set, the track can be used. To make it decorative, colored pebbles and foil are mixed into the sand.

To create a garden path from plastic bottoms, you must prepare the base as described above. Use scissors to cut the bottles, leaving 7 to 9 cm from the bottom.

The thickness of the sand embankment should be about 15 cm. Tamp the sand, moisten it and start laying the bottoms. The same work is done with bottle caps. By matching colors and arranging the lids in a specific order, you can create a beautiful garden path with plastic lids.

to buy for a summer residence is not expensive, reviews, buy, price, photo, for a summer residence, do it yourself, buy in an online store, in leroy merlin, leroy, plastic garden path, price, making a garden path, using a plastic mold, plastic tiles, for garden paths, buy a plastic mold, garden path, for a summer residence, garden plastic path, modular plastic tiles, for a summer residence buy, inexpensive