Metal siding for a fence - a photo, how to choose? Construction technology + Video

Metal siding for a fence - a photo, how to choose? Construction technology + Video Metal siding for a fence - photo, how to choose, construction technology. Those who love wood drawing increasingly began to opt for materials with its imitation, and less and less began to buy real wood. This is due to several factors. The fact is that the price of wood is higher, the complexity of installation is greater and timely and expensive maintenance is required, since otherwise the fence will last much less often.

In this case, a metal-siding fence under a tree would be ideal for the owner of the summer cottage.

A drawing on such a material shows the beauty of real wood so accurately that it will be difficult to recognize the metal in the material and is possible only at close range.

General information

Production technology

Metal siding is a profile panels made of aluminum or steel sheets, the thickness of which is from 0.04 to 0.065 cm. The decorative surface will be protected from any type of environmental impact.

The production of material is carried out by the method of cold rolling, during which, under the pressure of certain shafts, the metal gets the desired shape. Components, namely corners and slopes, are made on an automatic or manual bending machine. The finished material is stored in bays.

Dimensions and features of sheets

Metal sizing with wood imitation is most often based on galvanized steel, and on top of it the manufacturer applies protection that has many layers:

Standard sizes are as follows:

  • Length - 50 to 600 cm.
  • Width - 20 to 25 cm.
  • Thickness (metal) - from 0.048 to 0.061 cm.

  • Weight - from 2.4 to 3.5 kg per 1 m 2 .

With this range of sizes, it will be much easier to select the required amount of material, and the residue for disposal will be much less.

Advantages

Such panels have a lot of advantages:

  1. Heat resistance.

    A metal siding fence is not afraid of fire and high temperatures.

  2. Service life. Some of the polymer coated sheets can be used for up to 50 years.
  3. Anti-corrosion. Reliable protection of the material against corrosion provides high resistance to all manifestations of moisture.

  4. High strength. The material does not deform due to ultraviolet radiation, precipitation, strong winds and loads.
  5. Decorative. The quality of imitation of timber and logs perfectly combines a fence made of metal siding with wooden buildings on the site, makes it possible to combine sheets for the fence with brick posts, as well as posts made of metal and stone.
  6. Practicality.

    Panels do not require periodic maintenance or painting. Contamination can be removed with detergent, soft cloth and water.

  7. Ease and convenience of installation. All installation work can be carried out without assistance.
  8. Reasonable price.

    Such a fence in the end will still be cheaper than building the same one, but from real beams or logs.

The material, made at the proper level, has no shortcomings. But the products of unscrupulous manufacturing companies, which are trying to save money on the polymer coating and on the remaining layers of protection, scratches appear at the slightest contact with sharp objects. As a result, it gives a spoiled appearance and there is a good chance that the panel will corrode. For this reason, we recommend buying material only from trusted suppliers who can provide a guarantee for the purchased material.

Distinctive features

Sheets can be of different shapes, colors, have a different coating and overall appearance. Let's take a closer look at the features of the material for each parameter.

Type of metal

Panels can be:

  1. Metal siding for a fence - a photo, how to choose? Construction technology + Video Steel . Their distinctive feature is their high strength, since even with severe mechanical damage they do not deform. Can be used for cladding the facade of the building and installing fences.

    Such panels weigh a lot, but are more durable. At a price they are several times cheaper than the second type, but if the surface is still damaged, the layer will begin to corrode.

  2. Aluminum . The second name is alucobond (aluminum composite). They are often used for finishing works and much less often for facade cladding.

    Poorly suitable for creating a fence, as it deforms even with small influences. The price is high. The material is not subject to corrosion.

It is not difficult to install these both types of panels, but when selecting material for the fence, it is better to give preference to a reliable option - steel metal siding.

Coating

The surface layer of sheets is of several types:

  1. Plastisol.

    It bears the PVC-200 marking. Service life over 30 years. Creates an imitation of the texture of the timber on the front side. Also, the sheets have an embossed surface. The maximum allowable temperature mode of use is +85 degrees.

    Plastisol helps to protect the material from precipitation, moisture and corrosion.

  2. Pural. Has the PURAL marking. Average term of use is about 25 years. Due to this, the color will remain in its original form for a long time, that is, it will not fade.

    The layer thickness is 50 microns, but compared to other protective coatings, it is not so resistant to environmental influences.

  3. Polyester. is PE marked and matt polyester comes under REMA. Duration of operation is 10-20 years.The surface is smooth, and at the same time resistant to corrosion and fading.

    The limiting temperature of use is up to +125 degrees.

  4. Polyvinylidene fluoride (PVDF). Has the PVDF marking. Sheets with this coating can last up to 50 years. 4/5 of the base is PVDF, and 1/5 is acrylic.

    This type of coating is considered a type of Teflon.

Note: polyvinylidene fluoride is the most durable and strong metal siding coating for fence, but the price of such a product is quite high.

External features

The material is produced in two variations:

  • Smooth - holes for fixing, they are made in the process of fastening.
  • Perforated - goes for sale already with drilled holes for nails and screws.

By the way, the second option is a little more expensive, but it will be more convenient to use.

The risk of material deterioration is minimized.

Color

Panels are made with imitation:

  • Logs.
  • Beams.
  • Block house.

Simulation of logs can be double or single.

To obtain a better image of wood on the sheets, a rolled Printech coating is used, which differs from other types by a wide choice of colors and different types of wood. There are panels made without rolling, but their price is not lower than the first ones and they do not look so impressive.

In addition, the tint coating can be:

  • Matt.
  • Glossy.
  • With 3D image.

  • Tested.

Most popular breed shades:

  • Metal siding for a fence - a photo, how to choose? Construction technology + Video Textured cedar.
  • Bleached, gold, dark and stained oak.
  • Brazilian cherry.
  • Matt and glossy pine.

Oak tones with various shades are most often used.

Structure and shape

According to the shape there are the following panels:

  1. L-bar. Its thickness is 0.026 cm. The first letter of the name speaks for itself - the material is light.

    The manufacturer tried to highlight this, put the emphasis on the fact that the material is light in weight and will be easy to assemble. The depression in the profile is very similar to the shape of Mount Elbrus, which is why the panels got their name.

  2. EcoBrus. Its thickness is 0.035 cm.

    It is considered a safe and environmentally friendly material. In terms of other parameters and properties, it does not differ in any way from the first type.

  3. Eurobrus. Much more in thickness than the first type - 33.8 cm.

    The depth of the groove and the shape between the beams are also greater. This massiveness has made the variety more popular for the installation of fences and cottage cladding.

When properly installed, any type of fence will work.

Which is better - metal siding or corrugated board?

According to technical characteristics, it is more difficult to determine which is better - a fence made of metal siding under a bar or a fence made of corrugated board.But in terms of external characteristics, metal siding wins, since fasteners are not visible on both sides of the fence.

If we talk about professional flooring, then from the front side it does not matter what color each self-tapping screw will be visible. As for the assembly speed, fixing the profiled sheets will be much faster than fixing them in the grooves of each metal siding strip.

TOP-5 manufacturers

Let's look at the most reliable companies, according to buyers. Here are the five best domestic manufacturers.

Metal Profile

A fairly large manufacturer of roofing and facade materials.

One of its largest enterprises is located in Lobnya, Moscow Region. The company creates metal siding with a special protective polymer coating. The production lines have automated rolling mills. The material is used for finishing the facade, creating fences on the street, filing the cornice.

INSI Holding

This holding was founded in 1992.

Now it includes 12 companies that are engaged in the creation of roofing and facade materials. The holding has a research laboratory where you can constantly work to improve the performance of products.

SeverStal

Metal siding for a fence - a photo, how to choose? Construction technology + Video The company was formed instead of the Cherepovets metallurgical plant in 1993 ...

They are engaged in the production of any building materials made of metal. With high quality, the prices of goods are acceptable for people with different incomes.

ОМI

This is a Russian manufacturing enterprise, which was founded in 2001. It began its work with the production of metal tiles, but at the moment this is only one of many directions. OMI makes siding and other goods only according to international standards.

Grand Line

The "Metallist" association has been producing all kinds of metal structures with the "Grand Line" brand for more than 40 years. It has become one of the best vinyl and metal siding in Russia. The panels from the manufacturer are available in 50 colors. Some of the models have improved dirt-repelling properties. The price is reasonable.

All material is resistant to impacts, as a special system SNOSKROOF GL is used. After a year, the color will not fade and will remain in its original form, as you bought it just yesterday. Achievement of imitation of a bar is obtained thanks to the coating of Colority Print. The company is so confident in quality that it gives a 50-year guarantee.

Installation methods

Installation of a metal siding fence can be vertical and horizontal.

When installing a horizontal strip, they are installed to the fence frame and fixed with self-tapping screws, and in the second they are installed in a vertical position. Each option has a docking lock, which is located so that water will not get into the structure.

The whole list of actions is simple and you can do everything yourself if you follow the sequence of actions.

  • Instrument preparation

Metal siding for a fence - a photo, how to choose? Construction technology + Video Please refer to this step responsibly, as missing tools can cause a complete stop of construction. When preparing, also do not forget to draw up a schematic representation of the future fence, as well as calculate the cost estimate.

  • Selection of types and methods of installation

Now you can start marking. To do this, use a cord and wooden pegs. We drive the latter in the places where the supports are installed, and then we pull the cord between them. Here you should clarify what kind of fence will be - double-sided or one-sided. In the first case, the distance between the supports should be 2 meters, and in the second up to 4 meters.

The selection of material will depend on the relief in the region, what will be the load on the fence and what the owners have. Timber panels look beautiful in combination with brick pillars. Also an interesting option would be metal supports, as they are durable. It is permissible to use natural wood for supports, but in this case, careful treatment with protective equipment - antiseptics and fire retardants will be required.

  • Assembling the sections

Now you can proceed to setting the horizontal or vertical guides.

The pitch will depend on the width of the panel. If, for example, the width of the siding is only 20 cm, and the fence is 2 meters high, then the lag should be from 10 to 13 pieces. The beams should be made of metal, and then welded to the posts. The second option is to make beams from a bar, which must be fastened with self-tapping screws or metal corners.

Metal siding should be installed with an overlap of up to 5 cm, and for horizontal installation, the upper element should overlap the lower one, so start installation from below.

The distance from the ground should be at least 20 cm. If the fence is double-sided, consider a special bar or cover for the top of the fence.

  • Care

Such a fence does not need special treatment, but in order to eliminate contamination, we advise you to adhere to such recommendations:

  1. Use only mild detergents that do not contain abrasive particles.
  2. When using detergents, do not keep such solutions on the surface for more than 10 minutes.
  3. The surface can be cleaned with a water pressure from a hose or with a soft bristled brush.

It is strictly forbidden to use acetone or other solvents. Imitation of metal siding under natural wood makes it possible to create durable hail without complicated installation technologies.

.