Plasterboard ceiling hangers

Plasterboard ceiling hangers Distance of plasterboard hangers on the ceiling

Installation of the ceiling from plasterboard sheets needs to follow a number of professional tips and important rules. This type of ceiling coating is incredibly popular with customers due to its low price and easy installation.

But in order for the structure to be at the highest level and to be perfectly flat, you just need to know about the distance of the plasterboard suspensions on the ceiling.

Features of ceiling suspensions

Ceiling suspensions are a universal product, and its functional purpose will be to ensure reliable fixation of the gypsum plasterboard, to perform some decorative functions of coatings ..

. Such components not only help to obtain an ideal, flat ceiling surface, but also make the structure especially stable and durable, soundproof and heat-insulating parameters are noticeably improved, and help in the implementation of the conceived design with varying degrees of complexity.


The distance between the suspensions on the plasterboard ceiling

When installing the gypsum board, it is important to determine in advance what the number of suspensions required. This size will directly depend on the bearing capacity of the element. It is also important to take into account the fact that an ordinary drywall sheet having dimensions of 1.

2 * 2. 5 meters will weigh about 22 kg. According to the declared parameters, all kinds of parameters of parts can withstand this type of load:

  • Butterfly - 40 kg.
  • Vibration suspension - from 12 to 50 kg.
  • Nonius - 40 kg.

  • Anchor - 25 kg.
  • Straight - 40 kg.

A suitable amount must be calculated based on the bearing capacity, as well as the mass of drywall sheets. They should be spaced 0.7 meters apart.

In certain situations, this size can be increased by 0.3 meters, but not more.

Dimensions of suspensions

Plasterboard ceiling hangers As experience shows, the selection of the ideal the gimbal that really fits will depend a lot on its size and purpose. The most popular type has become a straight suspension, and it also has a standard size of 1.25 * 6.

3 meters. It should be used in a situation where users want to insulate ceilings or level them. This size is enough to hide the electrical wiring between the base of the ceiling and the structure of drywall sheets. If it becomes necessary to create ceilings with non-standard geometric shapes or if you want to install volumetric elements (ventilation cabinet), then you need to use a wire rod. The length of the suspension for wire-type gypsum board is 0.

5 and 1 meter.


An incredible range of suspensions is presented on the building materials market, which differ from each other in technological nuances, shape and fastening methods.Hangers for drywall sheets are very different in size and variety. Each type of product will have certain features, advantages and disadvantages.

Direct suspensions for gypsum board

The most popular and even widespread option.

According to external data, it is a rectangular plate made of galvanized steel. The main reason for such popularity of suspensions can be considered that due to the small impact of a mechanical nature, it can be changed, which will result in a U-shape. Despite its small size, a galvanized steel element can withstand heavy loads (up to 42 kg). It will not succumb to the aggressive effects of corrosion, and also has a high level of protection against moisture. The usual dimensions of a straight type hanger for drywall sheets are 1.

25 * 6. 3 meters. The design parameters make a direct suspension on a plasterboard ceiling an indispensable element if you need to install sheets of material to stone, concrete and even brick foundations. Due to this, it can be used in rooms with different purposes.

Quite often, such a suspension is used for:

  • Frame assembly for wall or ceiling surface finishing.

  • The preparatory stage of the base of the frame for further flashing of drywall (this option was the best solution for a room where there are noticeable flaws in the ceiling surface, including a base with irregularities, cracks, etc.).
  • Aligns all surfaces.

Let's consider everything in more detail.

Extended hanger

Such a device is used in cases where a metal profile is required to be installed at a distance that exceeds the standard parameters.

Quite often, such elements are 0.52 meters long, and they are produced exclusively for individual orders. If the need arises for an elongated profile, it is possible to create it from a direct suspension thanks to simple actions.

Anchor hanger

This option is also popular under the name "clip hanger". Its main purpose is to install plasterboard structures, fix suspended ceilings.

Anchors make it possible to create the desired ceiling space. This will mean that through the use of such a design, buyers will have the opportunity to adjust the height of the selected ceiling with their own hands. Height adjustment is carried out by pulling from the wire. The anchor structure includes a pull rod and a clamping piece. It needs to be installed in a profile, and then it is required to fix everything in this position by means of a clamp, which is located in the lower structural part.

it is extremely important that, in contrast to direct suspensions, the anchor has a lower bearing capacity (no more than 25 kg).

Suspension rod

Quite often, when installing a ceiling made of plasterboard sheets, it becomes necessary to change the construction height up to 1/2 meter. There may be many reasons for this, the most common ones include the need to lay utilities, the creation and finishing of a ventilation box, or the installation of a ceiling with many levels. In this case, it is required to use sliding hangers for gypsum plasterboards, which have become known as an element in the role of a wire structure. The diameter of the suspension will be 0.

4 cm. On the one hand, its special eye for anchoring to the reinforced concrete floor, and on the other, a clamp made of galvanized steel. The height of the ceiling structure can be adjusted by increasing or decreasing the length of the wire rod. They are produced with the usual characteristics of length, and can be of two types - 1/2 and 1 meter. When changing the construction height of the ceiling, the excess traction must be cut off.

Vernier suspension

A special device due to which the structure is given an additional degree of rigidity. The vernier hanger is made of the following elements:

  1. Plasterboard ceiling hangers The lower part is made as a clamp, that is, the fastening part with projections. For ease of fastening in the desired position, there are many holes for such a part.
  2. Directly the suspension itself, whose length will be from 0.4 to 1 meter.

  3. Fixing component in the form of an attachment bracket, due to which the suspension will be fixed in the required position.

Please note that the normal bearing capacity of the vernier will be 40 kg. When installing, it is required that the distance between the hangers on the plasterboard ceiling is at least 0.6 meters.

Vibration suspension

Special types of adjustable suspension for drywall sheets, which is required to give the structure the functions of sound insulation.

It is not used very often when installing plasterboard ceilings. This is explained by its unnecessarily high cost, the ability to muffle extraneous sounds through other methods. As practice has shown, the use of such a device in combination with a seal makes it possible to provide sound insulation to the maximum.

This type of structure is produced in different variations:

  • Regular suspension.
  • Polyurethane vibration suspension with high sound suppression capabilities.

  • Anti-vibration mount construction that looks like a standard anchor.
  • The removable vibrating plate is an adjustable structure that allows you to fix profiles with different lengths.

We suggest looking at useful tips from the masters.

Expert advice

Despite the fact that installation is not considered an extremely difficult task, not every user is able to perform the installation work with high quality.During the installation process, great attention must be paid to criteria such as the mass and thickness of the material.

According to the available information, make your choice of products for fastening. Experts strongly advise you to pay attention to the following points:

  1. Before starting the installation of fasteners, it is required to mark the points of fasteners on the surface. At the same time, they should be as close to the profile joints as possible, ideally the distance between the wall suspensions made of drywall sheets should be 0.7 meters. When fixing drywall sheets, it is required that there are small gaps between the drywall sheets of the building material.

  2. In order to ensure maximum tightness, you can glue the guides between them with a special strip.

  3. The bearing profiles should not be too close to the surface, and the self-tapping caps should not be left below the level of the drywall.
  4. The easiest method to test the strength of a fastener is to pull it lightly. If all components remain in place, this will mean that the fixing is as strong as possible, and the fixing is done correctly.
  5. For fastening the structure, it is required to use galvanized fasteners.

    They help prevent the formation of corrosion, but they also increase the fire resistance of the structure. A dowel with a nylon coating is best used for attaching the rails to wall surfaces.

It is also important to determine in advance the places where the lamps, decorative elements and wall cabinets will be. This makes it possible to avoid further partial destruction of the plasterboard coating.


The distance between the suspensions on the ceiling surface should be up to 0.

7 meters, and compliance with this rule allows you to get a reliable and durable structure. Moreover, in the implementation of the fixation process, it is necessary to take into account many factors that help to obtain an ideal design, which is distinguished by a high degree of aesthetics and performance.

( 1 grade, average 5 of 5 )