Plastic bottle gutters

Plastic bottle gutters How to make a drain from plastic bottles with your own hands. Often summer residents are faced with the fact that they do not have enough funds to equip certain systems, since a lot of money goes into finishing / building a house. For this reason, it will be an excellent solution to the problem of arranging some structures from waste, improvised material. Naturally, he will not be able to serve for a long time, but he will be able to help out for a short time. Let's take a look at how to assemble a gutter from plastic bottles with our own hands.

Roof drain is an important drainage element. In its absence, melt water and rain will flood the foundation and walls. The drain system can be made from a variety of materials, and usually metal is used for this purpose. But sometimes such costs cannot be called rational or they simply cannot be done when it comes to arranging a country house. Is it possible to reduce the cost of such work and, if so, how? It turns out that everything is quite real, it is enough to make a drain from plastic bottles, making it with your own hands does not cause difficulties.

In this article we will talk about how to implement such a solution.

General information

Advantages and disadvantages

Do-it-yourself drain from plastic bottles is an excellent alternative to creating a capital drain. But what are the positive and negative characteristics of such a system? Why is it often used by DIYers?

A roof drain made of plastic bottles has several advantages:

  1. Plastic bottle gutters Low cost. All the necessary materials, namely plastic bottles, can be found anywhere and completely free.
  2. Erection speed.

    All furnishing work can be completed within one day.

  3. No specialists are required. Such a drain, which will be made from plastic bottles, can be easily assembled with your own hands. You don't even need an assistant for the construction.

These advantages and a sufficiently high efficiency of the system as a whole attracts a lot of craftsmen, both home and professionals, to this method of arranging the system.

But such a drain has certain disadvantages. First of all, we are talking about the service life. It is unlikely that such a drain will be able to serve you longer than 1 year. Moreover, such a drain for water from the roof is not able to withstand heavy loads, and if there is a heavy downpour, then the device simply will not cope with the task.

The use of used plastic containers to create a drainage system is justified only if it is a temporary measure.

Also, a similar drainage system can be used for small country houses, and using a system for a permanent residential building would not be a smart solution.

Steps for making a gutter

Finding the right material

DIY plastic bottle gutter can be very effective ... The main thing is that everything is done correctly.

First, you need to prepare the basic materials, namely plastic bottles for draining rainwater. But which container will be better? For the roof drain system, bottles with a capacity of 1.5-2 liters are ideal.

So that in the future, during operation, the drain does not bring a lot of trouble, then all containers must meet the following list of requirements:

  • All plastic bottles must be the same size. This will help to a greater extent to facilitate the creation of a drain with your own hands.

    Moreover, it will help keep your entire system airtight.

  • Tara should be chosen without relief, even, so that there are no protrusions and recesses on it. This rule must be observed without fail, otherwise the drain will quickly become clogged and will not be able to perform its main functions.
  • Remove labels from all containers. To do this, it is enough to place all plastic containers in a cup of water.

    If you do not do this in advance, then after some time the drain will become a "monster", which will be hung with paper rags.

Which color to choose? There are no specific guidelines here. Everything will depend on your preferences and tastes, but the only thing that can really be advised is the use of dark containers, since in this case the stuck debris in the drain will not be so visible, but believe me, there will be enough of it in the drain. Now a little about how many plastic bottles you need. In order to answer such a question, certain calculations must be performed.

You will need to measure the perimeter of the roof and this will be the length of all gutters. You should also consider the height from the ground to the eaves. This parameter will indicate the length of the "pipe" of the drain.

After that, let's calculate our gutter from plastic bottles. You need to measure the length of a plastic bottle and calculate how many pieces are required to do the work yourself.

But here you need to take into account two extremely important factors - the length of the bottle should not be calculated in full, but only 80%, since the remaining 20% ​​will be used for the joint. In addition, the number of containers must be stocked.

Additional tools and materials

To create a gutter system, plastic bottles alone will not be enough. You will need to prepare other materials and certain tools in advance.

In order to cope with this task, you will need:

  • To connect the individual components of the gutter, you should prepare a furniture stapler and many staples for it.

  • Prepare steel wire. It will be needed to attach the gutters and pipes to the roof.
  • Don't forget the instrument.You will need large scissors or a sharp utility knife to cut the plastic bottles. You will also need an awl / soldering iron (to create holes) and a drill to complete the work.

In order for the drain to be airtight and in no case to leak water, you will need to use a sealant. But there is a certain nuance here. Naturally, in this case, the drain will be reliable, but its cost will increase. In addition, the work will also last more than one day. If you plan to use such a system as a temporary solution to the problem, then there is simply no point in buying expensive sealants.

Installation work

So, how to make a drain from previously used plastic bottles? First, you need to create a plan for the future gutter system. Determine the location of the gutters and the location of all pipes Next, you should prepare all the materials, and only after that you can proceed directly to the installation. To begin with, you should assemble with your own hands the horizontal part of the drain, which will be located along the eaves of the roof,

and this work should be carried out in a certain sequence:

  1. Plastic bottle gutters First, you need to prepare all the plastic elements for work. From them you will need to cut off the neck and bottom in such a way that you get an even cylinder. Then cut the bottle in half.

    As a result, you will have two gutters in your hands.

  2. After that, you can start assembling the horizontal part of the drain. To do this, all the scraps should be overlapped with each other, and each part should go over the other at least a couple of cm. At the same time, take into account where the slope of the gutter will go. It should be done so that the drains do not encounter obstacles in their path.

  3. The halves of the plastic blanks should be fastened together using a furniture stapler. You can use a thin wire instead, and coat everything with sealant to improve the sealing qualities.

When you have assembled a gutter of the required length, you can attach it directly to the roof. For this, it is better to use steel wire. Here you should use a drill to drill holes in the roof and attach a drain to them.

You can nail nails to the eaves and install on them. It is also very important that the angle of inclination of the drain is maintained during installation work.

It should be directed towards the downpipe, which will be located at the corner of the house. As a rule, the slope should be built on the basis of differences of 0.2 cm for every 1 meter of the gutter.

If you do not follow this rule, then the drains will begin to accumulate at a certain point, and moreover, the garbage that will pass along with rain and melt water will certainly form a blockage somewhere.

Construction of the vertical part

The final stage of creating a gutter for a roof from plastic bottles will be the assembly and installation of drainpipes, and such work should be done proceed as follows:

  1. Cut off the bottom of the plastic bottle.
  2. The neck must be cut off, but not completely - it is required to leave such a segment so that the pointed end is formed.
  3. After that, insert the bottles into each other and get a drainpipe.
  4. To improve the strength properties, the resulting structure can be attached to a wooden stick.

    In this case, the risk of pipe breakage due to wind or mechanical stress will decrease. Moreover, such structures will be easier to attach to the wall.

It is also important to create the correct funnel for the drain. It should be made from the top of a cut plastic bottle. It is enough to make slots on the sides so that the gutter can fit tightly into them.

Then the funnel should be inserted into the downpipe. As a rule, the place of transition of the drain from the horizontal part (i.e., the gutter) to the vertical (i.e.

, the standing pipe) is made at the corner of the building.

But there are certain nuances here too. If your walls are too long, then the gutter will turn out to be long, and because of this, it will not be able to cope even with the flow of water from a little rain. To avoid this, pipes and funnels should be installed every 4 meters of the gutter. This rule is extremely relevant if the gutter was made of plastic pipes, since this material is not very durable, like ceramics or metal.

Results

At this point, the manufacture of a drain from the roof, which is created from plastic bottles, can be considered complete. There is an additional recommendation - it is desirable that the gutter be tested, and it is better to do this at both the first and second stages. First, spill some water after attaching the gutters to the roof, and this way you can understand if the slope is made correctly and if you have found a leak. After the structure is completely assembled, you can conduct an additional test, and then you will see the entire operation of the system. If everything is normal, then the new system can be used to drain wastewater from the roof.

.