Selection and Installation Tips- Tips + Photo & Video

Selection and Installation Tips- Tips + Photo & Video Heat flow into the house and its distribution is an important task of any radiator. Therefore, the issue of choosing a radiator must be taken very seriously. In our article we would like to tell you about steel radiators of the Lidea LK brand. Currently, they are in great demand among consumers and have shown themselves only from the best side.

Heating panel radiators of this brand are produced from high quality materials using modern technologies and under strict quality control.

The devices can be used to heat not only apartments, houses, but also industrial premises, including offices, schools, kindergartens and hospitals.

The only limitation when choosing an element is to take into account that Lidea LK radiators are not intended for rooms with an aggressive and / or humid environment. But as practice shows, it is possible to install and use them in kitchens, baths, bathrooms, as well as in places outside the spray zone.

General

Benefits

  • Selection and Installation Tips- Tips + Photo & Video High thermal conductivity with low heat consumption;
  • Easy to install and maintain. The radiators are equipped with removable sidewalls and a top grill to prevent dirt and debris from entering and facilitate maintenance.

  • Not high cost. Optimal in terms of cost, quality and performance;
  • High level of aesthetics. The developed design and a variety of models allow you to choose the device for any interior.

Modification

Panel radiators are divided into two types:

  1. Compact;
  2. Wagon.

Modification Compact

Radiators of this line are supplied with four pipes.

They are connected to the heating mains from the side. Hooks are provided on the back cover for wall mounting. With which it is very convenient to hang the radiator on the wall.

Modification Universal

Heating elements of this line also have 4 pipes. They can be connected to the heating system both with a side connection and from below due to the presence of two circuits for output in the lower part.

A thermoregulation valve is installed in the upper part of the radiator. The advantage of radiators of this modification is the ability to shut off the water and dismantle the battery without draining the water.

Details

Basic complete set of two modifications:

  • brackets;
  • dowels ;
  • screws ;
  • plastic plates;
  • air vent;
  • plugs.

The main detail in any radiator is a panel that heats up and gives off heat to the room. This element is made of durable materials with high thermal conductivity and at the final stage is covered with heat-resistant enamel in several layers or zinc phosphate.

In terms of thermal conductivity, radiators are in the line between cast iron and aluminum. By design, they are produced in single-row, two- and three-row.

Most of the batteries are supplied with 1-2 panels and convectors. And some designs of convector batteries may not have at all.

The main versions of Lideya brand radiators are:

  1. Selection and Installation Tips- Tips + Photo & Video ЛК 10 - construction without a convector;
  2. LK 11 - panel with a convector.

    This modification has a compact size and increased heat transfer;

  3. LK 20 - installation of two panels is provided;
  4. LK 21 - a pair of panels and a convector;
  5. Type 22 - two panels, two convector, grill.

Radiator of any Lidea modification:

  • For transportation it is packed in special packing materials (air bubble film and plastic and cardboard corners);
  • Produced on the latest Swiss equipment;
  • All batches of devices are tested under an excess pressure that exceeds the standard value by two radians;
  • Equipped with a specially selected mount for mounting.

Installation of radiators Lideya

Radiators are always installed on a previously prepared surface of the walls. The batteries are fastened to the walls using the fasteners included in the delivery set in accordance with the radiator modification.

For the best air transfer, some parameters must be observed:

  1. The distance from the floor to the bottom surface of the radiator must be at least 100mm;
  2. The distance from the window sill to the top edge of the battery is 100mm.

After installation, it is necessary to test the installed radiator.

Cost

The cost of a particular model is determined primarily by the length and height of the radiator, as well as based on design features. The price range for Lideya LK radiators is from 1400 rubles to 18 000 rubles.

Reviews

Buyers give only positive feedback on radiators of this brand. They are satisfied with the design, material of manufacture, technical capabilities during maintenance (cleaning and dismantling).

They are compatible with any heating system. The only thing is that these radiators are very sensitive to the pressure drop in the system. Therefore, many buyers recommend installing them in country houses or houses with low storeys.

.