Siding dimensions - length and width
In Ukraine and Russia, more and more often when carrying out external cladding of buildings resort to the use of siding panels. They make it possible to protect rooms and a house from bad weather, and also give new life to dilapidated buildings. We suggest considering the dimensions of the siding (length and width).
So, one of the methods of cladding from the outside for buildings is siding, which gives heat-insulating, decorative and sound-insulating qualities. the modern construction market is rich in materials that differ in types, dimensions and cladding options.
But let's look at everything in order. The main criterion in the selection of siding is the building material from which the slats are made. When deciding on the latter, it is required to rely on climate conditions, and also on cost.
It is required to highlight certain options for the manufacture of such material as siding:
- PVC - sheathing from such panels can last up to half a century, without undergoing any changes at temperatures from -55 to +55 degrees. The main advantages here are lightness, reasonable price, and also, importantly, ease of maintenance.
It is better not to use this type in areas where there can be sharp temperature changes. In addition, PVC does not have a high degree of shock resistance and emits toxins when burned. This type can be used for both interior and exterior home decoration. For products in dark shades, you will need to spend 20% more than for light colors.
- Metallic is a very durable siding material that can last more than half a century, and temperature fluctuations are not able to affect it.
If you decide to perform cladding with metal siding, then you need to get ready to lay out a round sum, and also face corrosion if the integrity of the coating is violated. When it burns, it starts to heat up, and this can raise the temperature in rooms.
- Fiber cement - its main advantage is that it can withstand sudden changes in temperature. But it is quite heavy, difficult to install and has a limited color gamut.
- Wooden - it is most often found in the old decoration of country houses.
The material is very resistant to frost - up to -55 degrees, and is quite simple to install, has heat-insulating and environmentally friendly properties, and is also able to attract a low price. If you choose such a siding, then you will need to apply an additional protective layer and from time to time treat with antiseptic impregnations.
Even when facing from the outside, panels are used. For facades Unlike siding, they will consist of several layers. By studying the materials better, evaluating the advantages and disadvantages of each, you will draw conclusions which option is best for you.
It should start with the fact that siding is usually attached to a special frame or crate, while facade-type panels can be installed directly on the wall surface. If you have a desire to make the house better inside, then use those panels that are intended only for facing from the outside.
Siding type lamellas can only be installed in vertical direction, and in shape they can be in the form of stripes or rectangles. Facade types of panels are attached in any direction, and you can choose any shape for yourself. They also do not have limitations in size and can be applied with courage to both convex and concave walls of your room.
But if you use panels, then you need to be extremely careful so as not to spoil the thermal insulation layer.
In terms of price, siding will cost you 3 to 8 times less than facade panels. Even if you plan to do repair work with your own hands, then it is important to make a choice in favor of siding, since you will need outside help to install the plates. If you still find it difficult to decide on the selection of material, then you can combine both types. Facade slabs and siding look great when combined with each other.
Siding panel dimensions (length and width) help classify material. Previously, we analyzed the types of siding, and also identified their advantages and disadvantages, but then you can get to know each type better.
Vinyl siding (or PVC as it is called) is a plastic strip with a specific shape. They are easy to use during installation, because they have special locks, through which they can be easily connected together. Vinyl-type siding for a house facade can be attached using self-tapping screws, for which it is important to pre-install a special edge of the fasteners with holes.
The use of such material helps you both decorate your home and insulate it. According to the installation method, vertical and horizontal vinyl panels are distinguished, but in use more often you can still find horizontal ones.
Production is modern and does not stand still, and therefore new types of vinyl siding appear:
By the way, the first type is called basement siding.
Due to their enormous thickness, they are highly resistant to shock and mechanical stress. Another reason vinyl siding is so popular is the sheer variety of colors. The priority is usually pastel colors, because they are able to combine consumer and aesthetic properties. If you rely on notes of design style during repair work, then you can safely use various combinations of the color palette.
For outdoor work, metal siding can also be used.
Such panels have appeared on the construction market relatively recently, but have already managed to get many fans. Externally, it is extremely difficult to distinguish between metal-plastic and vinyl material. The only thing is that metal siding has a more pronounced texture, as well as the saturation of the pattern. If you have a desire for a private house to look like a building made of natural logs, then you can safely use wooden siding.
There is also an opportunity to choose what you like:
- Planken - wooden planks with edges either beveled or rounded.
This type of material is used when decorating the external facade of a building and interior rooms. It is also used in the construction of fences, gazebos and terraces.
- "American" - these are planks that have a wedge-shaped profile. Their use will give the room a designer look.
- Lining - it is distinguished by ease of installation work, durability and has an aesthetically attractive appearance.
- Block house is a wall decoration material that imitates a timber frame.
In order to solve the problem with the formation of moisture and dampness inside the house, it is required to provide excellent ventilation of the space. In this case, special roofing panels - soffits (from the Italian word for "ceiling") are perfect. They attach in a horizontal surface, and they also have special locks for connection, which makes them easy to use. They are created using plastic, aluminum or copper.
But the main advantage is that they have a perforated surface, which will help protect the house from the accumulation of moisture and dampness. Such panels for the facade are environmentally friendly, durable and fire safety. Soffits are simple in installation and maintenance, and you can buy them at an affordable cost.
Siding panels differ not only in the material of manufacture, in the range of colors and sizes. Vinyl siding is not the usual size.
Their thickness varies from 0.9 to 1.2 cm. But if you plan to use siding for more than 10 years, it is recommended to choose a thickness of 1.1 cm.
As for the length, the average dimensions are from 3 to 3. 75 meters. The dimensions of the siding, that is, the length and width are from 22 to 27.5 cm width, but the working one is considered to be from 20 to 25 cm. The area of vinyl panels can be from 0.
65 to 0.85 square meters. It is not difficult to decide on the dimensions of wooden siding. Wood panels are quite a whimsical type. For this reason, if you do not follow the standard specified dimensions, you may encounter deformation of the boards.
Typical dimensions of wood siding look like this:
- The thickness is 4 cm.
- The width can be from 9 to 18 cm.
- Length is 2 to 6 meters.
- The area can be from 0.55 to 0.
88 square meters.
As for metal siding, you can buy it with any length, since the facade material was initially made in the form of strips, and then it is cut to individual order. On average, its thickness can be from 0.5 to 1.3 cm, and its length from 0.
5 to 6 meters. The width of metal siding is from 19 to 21 cm, and the working width is from 17 to 19 cm. The area is from 0.25 to 3 square meters. Siding from the material for the basement is capable of repeating different types of stone, and therefore its average thickness is from 1.
7 to 2.4 cm. In length you can find panels from 1.1 to 1.15 meters.
The average width will be from 44.5 to 45.2 cm. The basement siding area will be from 0.45 to 0.
51 square meters.
If the choice for house cladding of the house fell in favor of fiber cement siding, then its average dimensions look like this:
45-3. 6 meters.
Please note that during renovation work, you can safely experiment with the dimensions of the sheathing and create unusual combinations. When buying, you need to pay attention to the price, and it will fully depend on the country of the manufacturer.
Materials made in Russia are more affordable in terms of pricing policy, but practically are not inferior in quality to foreign manufacturers.
People can face the issue of house cladding in various situations. For example, some building materials at first have an ugly look that you want to hide behind decoration elements. The rest may lose their original attractiveness over time. The possibility of cracks appearing on the walls of buildings is not ruled out, and the traces of repair work of which remain visible to the naked eye.
With house cladding, I want to do everything in a short time, inexpensively and so that the result pleases not just myself, but also passers-by. When selecting a material, remember about its vapor impermeability. The selected cladding on the outside should conduct steam better than the house wall material. Violation of this principle can lead to the accumulation of moisture, rotting of the building material, due to which the walls or the decoration itself will begin to collapse. Only one type of cladding is capable of fulfilling all the requirements - wood.
But if you have the opportunity to use a different material, there is a solution.
In the first case, it is required to leave a small gap for ventilation with a width of 7 to 13 cm between the wall and the trim. Keep the air inlets in the lower part, and the inlets on the top. In this case, the wall moisture will be removed and the housing will not suffer. In the second option, it is necessary to attach the cladding directly to the wall, but this requires taking care that the latter is protected by an excellent layer of vapor insulation.
There are several types of cladding:
And when choosing a material, decorative models are distinguished, which include thermal panels, siding, facade or ceramic masonry. As for thermal panels, they appeared relatively recently on the modern construction market, but they were able to gain popularity and love among buyers. The base of thermal panels is polyurethane foam or expanded polystyrene.
Thermal panels have high thermal insulation properties, which will help preserve the wall material. This type of cladding protects the insulation, is easy to install and can last up to 60 years, while maintaining its original appearance.
Please note that the selection of trim options is quite large. But still, you do not need to forget about the peculiarities of the climate of your region, as well as the material of the structure of your house. The selection of material really needs to be approached with all seriousness, taking into account aesthetic preferences and financial capabilities.
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |03, Nov 2020
Posted By: Work Style |01, Nov 2020
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |11, Nov 2020