Traditional courtyard toilets are still found in rural areas. However, time takes its toll, and more and more often people try to arrange a modern toilet room even in a private wooden house.
Installing a toilet bowl in your own household significantly increases the comfort of living in it.
Direct installation of the toilet is not such a difficult task. But if in a private house neither the toilet itself nor the provision of communications for it was initially provided, then this is what has to be done in the first place.
[contents ]
A ready-made suitable room would be ideal. A small room like pantry is suitable for the device.
It is very good if it is located near the drain well. If a suitable area is available only on the other side of the house, then this already creates additional difficulties.
But even in such a case, the arrangement of a modern toilet is quite possible.
In technical terms, all problems are solvable, however, they may affect the complexity of the work and, accordingly, their cost.
You can equip a combined bathroom, which will accommodate a washing machine, toilet and sink.
The task becomes much more difficult if the premises you need are not available at all.
We'll have to puzzle over how to select a free corner. It's okay if he ends up in the kitchen.
The opening for the entrance is best done in an adjacent wall. Lining, plasterboard, chipboard can be used as the main building material.
To place a bathroom next to the place where food is prepared, a continuous sealed partition must be made.
For transportation of waste sewerage is required, which can be gravity and pressure.
In the first case, a natural discharge into the sewer pipes is used due to a specially provided slope.
In another case, the movement of sewage in the desired direction is provided by a fecal pump installed in the system.
For a private house, you can use any of these options, usually the owners are determined based on specific conditions.
Most of their own homes have wooden floors. Installing a floor-standing toilet on such a surface may have its own characteristics, and it usually begins with its preparation.
The floor must be reinforced, well leveled and covered with practical material such as linoleum .
If the neck of the pipe is located above the outlet of the toilet, then it will be necessary to provide for its lifting.
As a podium, beams and wide boards are quite suitable. But if we have a concrete base, then this structure will require a different material - cement and brick.
All wood used must be treated with drying oil and painted. This will significantly increase its service life.
Usually, when creating a sewer system in a private house, it is connected directly. A simple collar with a sealing ring is inserted into the pipe, and the toilet outlet is mounted into it. If this does not work out, then a plastic eccentric for the toilet or a corrugated cuff is used.
The simplest is to connect to a local pump with the inlet at the required standard height. When the toilet is in place, it is important to check its connection to the sewer.
After applying the markings, it is removed, and the necessary holes are made in the floor.
Typically, fixtures are included with the fixtures. It includes dowels, decorative washers and self-tapping screws. Then, using a level, the toilet is installed, if necessary leveled, the gaps that appear are sealed with a cement compound. Then, using self-tapping screws, the plumbing is securely fixed and connected to the tank.
Recently, they have become increasingly popular special hanging toilet bowls with installation. Using the video on the topic, it is quite possible to install such a design on your own.
But first, it is advisable to seriously evaluate all the pros and cons, having correctly chosen a specific installation model.
Toilet bowls of such designs appeared in the 80s of the last century. In the field of plumbing, it was like a revolution: it was a real sensation!
A wall-hung toilet was considered prestigious and trendy.
However, before succumbing to the charm of new trends, it is advisable to assess the strengths and weaknesses of the model. The choice must be approached rationally and soberly.
The advantages of installing a suspended toilet
Disadvantages of installing a wall-hung toilet
Such a design looks, of course, more compact and neat, but the basic rule of plumbers - "easy access to communications" - is violated.
If even a small breakdown suddenly appears in the tank or pipes, you will have to open the cover panels and perform more global work.
That is, such a popular device has not only advantages, but also enough disadvantages. Therefore, before choosing such a design, it is advisable to think over and weigh everything properly.
What is called an installation?
This is a sturdy steel mounting frame that hides the cistern and all communications. The structure is immersed deeply into the wall, or is closed by another wall, an additional one, which is called a false wall.
The installation can be installed not only the toilet itself, but also the bidet and the sink.
There are two main types of installation: frame and block.
I. Frame
It is a capital structure, including a tank and the supply of necessary communications. Such a fixing installation can be placed anywhere, regardless of the quality of the walls and their strength.
You can fix it in different ways: to the floor, walls or in combination.
Possible corner models, mounted at the junction of the walls. This type of installation has only one drawback - high cost.
II. Block
It can only be mounted on a main bearing wall: ordinary interior partitions are not suitable for this purpose.
This is an affordable option, which is a plastic tank plus all the necessary fasteners. This option is quite affordable.
When choosing the type of the most suitable installation, its dimensions are of great importance.
With its dimensions, this sanitary equipment does not actually differ from traditional floor-standing ones.
They are the most convenient in operation, adapted for comfortable use.
It is quite possible to carry out the installation of a hanging toilet with your own hands.
To do this, you need to clearly know the sequence of all actions, in addition, you will need certain tools.
The subsequent operation of the entire system depends entirely on the correctly carried out installation.
Therefore, it is so important to follow the sequence of work and perform them with high quality.
All necessary installation work should be carried out only after all the necessary communications have been carried out and their connections have been removed. The installation must be installed before finishing work begins.
Haste is not an assistant in this matter: it is better to check everything accurately and scrupulously in advance than to redo it later.
You don't need an expensive professional tool for this. The usual devices that almost every owner has will do.
Tools
Setting up a toilet in a private home is not an easy task. You will have to spend a lot of time and effort, material resources to get a comfortable and functional room.
Thus, your sanitary facility will be fully equipped, and the quality of life of residents will significantly improve.
installation price of a wall-mounted toilet
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |06, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |02, Nov 2020