The stretch ceiling sticks to the ceiling : causes, elimination. Stretch ceilings are still a fairly new type of apartment decoration, but already quite in demand and popular. More and more people began to give preference to this particular type of coating, and were able to appreciate such qualities as beautiful appearance, ease of installation, wear resistance and durability. And as demand grows, quality can begin to suffer. In this case, after the repair, a variety of malfunctions and defects may appear.
For this reason, if you plan to order the installation of a stretch ceiling, you should contact only trusted distributors and manufacturers. If, nevertheless, annoying troubles occurred, then in order to successfully eliminate them, you first need to establish the cause.
Why does a stretch ceiling crackle
There are more complaints about this shortcoming total consumers. In addition, a crack appears regardless of how long ago the repair was performed - sometimes this phenomenon is not noticed even after five years of operation, and sometimes it appears after a couple of months or weeks. To understand the nature of this phenomenon, you need to understand at least a little about the principle of installing a stretch ceiling.
So, the vinyl film is attached to the frame, which is fixed around the entire perimeter of the ceiling. Next, you should fill the plinth, and there is a small gap between the coating itself and the concrete surface.
Sometimes the crackling is caused not by the coating on the ceiling, but by the wallpaper on the surface of the walls. It is for this reason that, first, you need to carefully examine everything, then check it, and then try to do something, instead of trying to eliminate the cause of the crackling at random.
Reasons for adhesion of the coating to the surface
Why does the stretch ceiling stick to the ceiling concrete? A similar defect can occur, and most often after repair.
The whole problem is that there is poor tightness between the ceiling overlap and the film. It turns out that somewhere there is a hole left, and drafts enter through it. They are the direct reason why the vinyl ceiling starts to stick as soon as you open doors or windows. Please note that PVC ceilings are more likely to adhere than textiles. To get rid of such a problem once and for all, it is worth either completely removing the ceiling, checking everything for leaks and blowing out the holes with foam if necessary, or cut out a small circle that is no more than 0.
7 cm in diameter in an inconspicuous place - behind the curtain or at the cornice, and then fix the edges with a special ring.
Where does the bad smell come from
The smell of glue, rot, rubber is another popular complaint.If the ceilings are made of PVC, then the unpleasant smell of chemicals or rubber is quite normal, and everything will go away after a few days. If there is a smell of stagnant water from the ceiling surface, then you will need to remove and check the overlap. The fact is that condensation could appear between the concrete and the ceiling, which causes the appearance of fungus and decay, and therefore an unpleasant odor.
Whatever defect you find with new or used ceilings, it always makes sense not to guess the reasons, but to immediately call the master, and preferably the same one who made the installation. Apartment owners who have managed to install a stretch ceiling structure in themselves face many problems in reality. To exclude the possibility of fraud from the installer, let's talk about everything in order.
The most important and first piece of advice is to use European type film, as their production has been tested for decades. Moreover, trust the installation only to those firms that have been able to recommend themselves well and have been working for several years.
You should not save on specialists, so that in the future you do not have to overpay when you fix such a problem as the adhesion of the stretch ceiling to the main ceiling. Stretch ceilings are quite unpretentious to maintain, but you still have to take into account some points to avoid unnecessary hassle, scandals and disappointments.
Problem # 1
Why began to sag stretch ceiling regardless of installation time? There are several answers:
Do not try to fix the problem yourself, as most likely the installer left you a warranty card. Those who understand this should do and redo their work, and even more so should eliminate errors, as well as unforeseen force majeure.
Problem # 2
Why did the stretch ceiling begin to crack? Every fourth person who has installed a similar structure in his house / apartment complains about this. In this case, there are a number of reasons:
If the installation of the stretch ceiling was carried out during a major overhaul, then in this case even the wallpaper may crack, and thereby create a sound illusion.
Problem # 3
Why does the stretch ceiling smell, and moreover, the smell does not disappear for a long time? This situation is quite common and should resolve on its own within a few hours after the installation is complete.
The material itself, namely polyvinyl chloride, has its own smell, which is due to technical features. During installation work, the film is heated, so intense evaporation occurs. If the manufacturer is of European level, and you asked for certificates to confirm the quality when purchasing, then everything will stop smelling after 3-5 hours.
If a Chinese PVC film was purchased, then prepare for the fact that it will smell strong and for at least a month (taking into account daily airing). Why does your head start to hurt after you have made repairs? If the material stinks so strongly that your eyes begin to watery, and your head breaks, then this is a 100% allergic reaction, and in this case you should get rid of the irritant, since your family's health and your own are above all.
Problem # 4
What to do if the stretch ceiling starts to "walk", that is, sometimes it inflates, and sometimes it is sucked in? In this case, it should be understood that the film is airtight. For this reason, the space in the room can be divided into two separate ones: from the floor to the canvas of the stretch ceiling, and from the surface of the film to the main ceiling surface.
In this case, there are only two reasons why suction appears:
The reason for this will be a sharp change in pressure in the space from the stretch ceiling to the floor surface.
When the PVC sheet begins to stick to the ceiling for the first reason, you just need to get rid of the drafts, eliminate the cause of their appearance. In the second case, everything is more complicated, and it will be necessary either to remove the structure and work with a spray gun, in which there will be polyurethane foam, or to build in fake ventilation devices, namely gratings, so that the canvas is returned to its original position.
It happens that a stretch ceiling sticks to a concrete ceiling, and sometimes it inflates, on the contrary, because liquid accumulates in it.
In some cases, the deformation creates such dimensions that the ceiling hangs almost to the floor.High-quality material is able to withstand up to 100 liters of water per 1 m 2 , and after draining, the ceiling should return to its former shape, and traces of sagging will not be visible. But if initially you decided to save money, and the materials were bought from the Middle Kingdom, of poor quality, then nothing can be restored, and the film will simply break. The coating can "walk" for various reasons, but you yourself should not eliminate such shortcomings.
For this reason, call the wizard who personally installed you.
Problem # 5
It would seem, how can this even be - a crumpled ceiling? Yes, quite, especially if the measurements were incorrect. Small "wrinkles" can be smoothed out when the canvas is heated, but if the errors are serious, then the material will have to be redrawn. Not often, but still there are cases when, after installing a stretch ceiling, sometimes immediately, and sometimes after a long time, ceilings begin to walk, which is especially noticeable when closing and opening doors and windows.
The reason for this may not be the tightness of the old, that is, the main ceiling.
Depressurization of the main coating can be due to any hole that connects the interior with the street, i.e., a crack in the floor slab, non-tight abutment of the ceiling slabs to the walls, not closed technological passages (ventilation and electrical ducts, heating pipes, etc. ). Further, everything is carried out according to the principle of hoods, which can take air from our kitchens and plumbing rooms, which will provide natural ventilation.
Draft appears due to temperature difference and pressure between indoor and outdoor. At the same time, the hood will work much more efficiently in winter than in summer precisely because of the large temperature difference. But there is also the opposite effect, namely reverse thrust, when air is simply not drawn into the hole for extension, but, on the contrary, blows out of it. Depending on whether the air is drawn outside or into the room, the stretch ceiling can inflate or rise.
In addition to the fact that such a phenomenon is not the most aesthetically pleasing, it can create real problems, to the point that the covering sheet will simply tear.
How to eliminate the pull-in or inflation effect
To prevent this effect interfered with you, before installation work on the ceiling, you should seal all the gaps between the ceiling tiles and the walls, as well as the gaps near the pipes that go into the ceiling. Although the process of the likelihood of getting into such a situation is small, only 1%, there are risks, and it is worth remembering this. There are two solutions to this problem - to remove the ceiling, remove all the suction cups and install the cover back, which is costly and extremely troublesome.
A more effective solution to the problem is the installation of special ventilation grilles on the stretch ceiling.After such a procedure, the ceiling ceases to be airtight, and air through such grilles quietly enters the room or is pulled back, and at the same time leaves the ceiling motionless.
As a rule, 1-2 grilles are enough per room, depending on the area and air flow. Grilles should be installed on a stretch ceiling in inconspicuous places, preferably behind a curtain.
It should also be taken into account that such suction cups are not always possible to eliminate, for example, if the reason for the entire electrical channel, then at the measurement stage it will be unrealistic to determine the leakage. But in order to prevent such a situation, you can install ventilation grilles and not wait until the ceiling starts to walk, and they look aesthetically pleasing, they can be installed in inconspicuous places, and the cost is small. Stretch ceilings are becoming more and more popular every day.
They have the best price-performance ratio, are practical and durable, and can be quickly installed. But sometimes unpleasant situations occur when, when you open a window or a draft, the stretch ceiling sticks to the main ceiling. Why is this happening?
Why does the stretch ceiling stick to the main ceiling
Naturally, the situation is unpleasant, but it can be solved, the main thing is to correctly determine the reason ...
Professionals have a lot of experience and they can get it right. Note again that adhesion occurs only with PVC membranes. Fabric canvases differ in that they have microscopic pores in texture, through which free air circulation inside the room is carried out. It is for this reason that the fabrics are not drawn in.
Installers noted that retracting and sticking occurs because there is no tightness between base and base ceiling.
The larger the gap, the more the canvas will stick when a window is opened or a draft appears. We recommend that you carefully check the tightness of the base ceiling before starting the installation of the structure. There are several ways to fix the problem.
Solving the problem of retraction
Method # 1
It is required to build ventilation diffusers into the stretched fabric, Moreover, the devices can be of different diameters, from 5 to 11. 5 cm.
Such diffusers should be installed in the corners of the room strictly diagonally. This method will make it possible to equalize the air pressure in the space behind the ceiling and the problem of adhesion, in theory, will eliminate itself. If you are confused by the fact that the integrity of the structure will be violated, that is, there is an additional option to eliminate the problem.
Method # 2
This option implies that you will need to dismantle the stretch ceiling, find a place for air suction and seal the cracks with polyurethane foam. After that, you should mount the canvas back, and the appearance will be unchanged.
This method is more complicated, you cannot do everything yourself, and you will need to use the services of an installation team.
Stretch ceiling is a very convenient, beautiful and stylish way of finishing, has unlimited service life, easy to maintain, practical, but a nuisance from sticking the ceiling to the main ceiling frustrating. Fortunately, we and now you know how to deal with this problem.
Posted By: Work Style |02, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |13, Nov 2020
Posted By: Work Style |02, Nov 2020