technology, editing methods + Video and Photo

technology, editing methods + Video and Photo How the house block is attached to the wall + Video and Photo. Traditional natural building materials have always been in fashion. At the same time, they have many shortcomings, and they are not always convenient for work, and this has become the reason for massive refusals to work with them. And yet there is a way how to get the appearance of the house, which will look like a building made of natural material, but in fact it will be siding, which is made in the form of imitation of a certain texture. So you can create the appearance of brick and masonry, a log or log frame, while using more convenient building materials for work.

Believe me, the results are quite realistic, but they are devoid of the disadvantages that natural materials have. In addition, they are able to perform not only decorative, but also additional functions of protection against mechanical influences and perform a rather important function of steam extraction, or rather drying walls. One of the options is the house block. Let's find out what the material is, how the house block is attached and about the fastening methods.

Varieties of block house

Block house is a material for external cladding, in appearance it resembles a log frame.

To do this, each panel has its own relief, which corresponds to the visible part of the log in the masonry. In a section, this is a segment of a circle. On the reverse side there are several longitudinal grooves that serve to compensate for expansion when the moisture level changes.

technology, editing methods + Video and Photo On the side edges there is a groove and a spike on opposite sides, with their help, the sheathing canvases are assembled. This is what the classic look of a block house looks like, which is made from real wood.

The material has the natural color of the wood from which it is made and does not differ in a variety of colors. And yet, when used, it is required to apply a protective coating, which will be periodically changed or updated, which will allow from time to time to change the shade of the walls and at the same time keep the cladding intact.

There are other options, namely metal and vinyl house block. These are variations of conventional siding, but their shape and relief correspond to a log wall. There are single-wave and two-wave types, which have a single or double relief texture.

They have their own technical characteristics that are inherent in vinyl or galvanized siding and are completely different from a wooden block house.

These materials are united only by the form, but the cladding itself from the vinyl, metal and wooden block of the house looks almost identical (the exception is the shade of the canvas, which sometimes differs significantly in different species), and the installation method and operating requirements they are different.

Species of wood used for making

Natural block house is made only from wood.The most common species:

  • technology, editing methods + Video and Photo Pine. This is the most popular type of wood in the country.

    It is lightweight and relatively clean in structure. Often there are various blemishes, tar pockets, blueness.

  • Larch. The wood is dense, has an expressive structure. The weight is relatively large, but the material is resistant to mechanical influences.

    It is prone to geometry changes when stress is selected during shrinkage.

  • Spruce. Fairly light and soft wood species, a distinctive feature is a large number of knots. But of all conifers, it is used the least often.

In addition to conifers, there are also materials that are made of hardwood:

  • Birch.

    It is the heaviest and densest, as it easily picks up and gives off moisture. The wood is durable, it lends itself well to processing and grinding.

  • Alder. The wood is relatively soft and clean. Has relative resistance to atmospheric moisture.

    There are very few flaws and vices. The weight of alder panels is low.

  • Linden. Light and clean wood of light weight. A distinctive feature is the low density of the material and softness.

    Requires extremely careful handling and regular renewal of the protective coating.

When buying, pay attention to the type of wood from which the material is made, since this will determine how the house block is attached to the wall, because each wood has features that you should be aware of in advance. For example, in conifers there is a certain amount of resins, and it turns out that coniferous material is to some extent preservative, since it slows down the accumulation and removal of moisture.

Hardwood, on the contrary, quickly and easily gain / release moisture, but this will continue until the time of final exposure. If the material is immediately covered with paint and varnish material, the aging process of the tree will be slowed down, but contact with moisture is also terminated, which will preserve the structure of the tree in its original form.

Please note, that a thick surface layer is not so important for the protection of wood as a high-quality impregnation of the solid wood with such agents as drying oil or special impregnating oils. The composition of such products may be incompatible with certain types of varnish and paints, so pay due attention to this when choosing a topcoat.

Ways of mounting a wooden block house

Installation of wood panels can be done in several ways. Let's highlight the main ones:

  • Fastening with screws / nails through the front surface. Such a fixation is strong and reliable, but noticeable heads of nails or screws will significantly degrade the appearance of the sheathing.

  • technology, editing methods + Video and Photo Hidden mount. The screw or nail should be screwed through the tenon, and when the next panel is installed, the head will be inside the groove.This method makes it possible to hide the caps of the fasteners, but there is a danger of the spike breaking or interfering with the tight assembly of the panels.
  • The technique of hammering nails (screwing screws) at an angle is occasionally used, this helps to eliminate interference during assembly, but in fact this is difficult in practice, the panels often split.
  • Clamp mount.

    This option is the most successful, as the panel will not be exposed to any type of impact. The clamp is attached to the crate (installation on insulation is acceptable). It has a bracket that will grip the bottom of the groove and firmly press the panel to the base, and when installing the next panel, the clamp will be closed from prying eyes.

Thus, you will get a hidden mount that will not destroy the body of the panel, and will not threaten the appearance of cracks, chips and dents. Installation does not require special skills, everything is quite simple and understandable even at an intuitive level.

Important! To fix a house block made of wood, the most convenient option would be a wooden crate, which is convenient for screwing self-tapping screws at any angles and which makes it possible to use nails.

Methods of mounting other types of block houses

technology, editing methods + Video and Photo In addition to wooden produce metal and vinyl panels. The installation methods for these two types are the same, since the siding has a special regulated installation procedure that does not allow changes.

The panel structure consists of a wave (convex part), a lock and a nail strip. The last two elements serve to fix the panel to the support system.

The locking part should be closed on the corresponding profile of the previous panel or on the starter strip, and the nail strip, which has many oblong mounting holes, will be attached to the crate with self-tapping screws.

In this case, it is very important to fulfill the main condition - do not screw the self-tapping screws all the way, and the panel must be installed so that it moves in both directions without resistance. Tighten the screws only perpendicular to the surface and in the middle of the hole so that there is the same power reserve in both directions. For is required so that the panel can change its position during heating and cooling.

Unlike a house block made of wood, metallic and vinyl types have a high coefficient of thermal expansion, so this feature should be taken into account during installation and leave room for slight expansion.

Changing the mounting method is not allowed. For starters, because the mounting holes must be of a certain shape, mounting through a standard drilled hole will prevent the panel from moving, which is fraught with deformation. Secondly, in any other places, the screw cap will be visible, and this will spoil the appearance of the canvas.

Attention! Before starting installation work, read the instructions that will be attached to the material in order to understand the installation method for this particular type of panel and take into account the individual characteristics of the materials.

Results

The setting depends entirely on the type of material.

Standard wood panels have several possible installation methods that will ultimately not affect the performance of the material. The master is only required to have some skills in working with wood (in order to file the joints at 45 degrees). Metallic or vinyl materials require special techniques that cannot be altered without compromising performance or appearance.

The procedure for installing siding materials is described in the instructions attached to the materials upon purchase. Study it carefully so as not to make mistakes when working.

.