Technology of frame houses from boards and timber + Video

Technology of frame houses from boards and timber + Video An important stage in frame construction is actually the assembly of the wooden frame of the house. Despite the fact that the construction of a frame house does not take much time, do not forget that compliance with construction technology plays an important role here.


  1. Preparatory work

Technology of frame houses from boards and timber + Video The list of preparatory work includes first of all:

  • drawing up a plan (project) of the future house,
  • calculation and purchase of building material,
  • preparation of the necessary construction tools,
  • construction of the foundation for the house.

A well-designed project will allow you to correctly calculate the construction and consumables. Only completely dried wood (timber, board, etc.

) is suitable for use in frame construction.

The foundation must be prepared in advance and gain the necessary strength. Before starting work, the foundation grillage is checked with a horizontal level, if necessary, leveled.

We erect the frame of a wooden house

  1. Installation of the lower strapping

The technology of assembling the frame of the house involves, first of all, fastening the lower strapping of the house. The grillage is covered with a layer of waterproofing (roofing material).

To attach the lower harness beams to each other, it is best to use the sampling method at the corners. Corner elements can be fixed to each other with anchors, nails or dowels. The final fastening of the elements is preceded by checking the corners and diagonals.

Technology of frame houses from boards and timber + Video
Installation of the lower trim of the frame house

We install stands and slopes for strength frame

  1. Installation of vertical posts

Technology of frame houses from boards and timber + Video Assembling the frame of the house begins with the installation of corner vertical struts, observing the required distance between them. The fastening of racks at the corners of the house can be carried out using metal corners (steel, reinforced).

This option is suitable if you used nails or anchors to fasten the elements of the lower strapping.

If the beams were connected with a dowel, the corner posts are fixed on the protruding parts of the dowels and are reinforced with temporary jibs

To attach vertical, non-corner posts, you can choose one of the following methods:

  • cutting method,
  • fastening with steel corners.

Fastening with metal corners, with fixation using galvanized self-tapping screws. Such a fastening somewhat increases the cost of the project, and increases somewhat, but the integrity of the beam in the lower strapping is not disturbed.

Technology of frame houses from boards and timber + Video
Correct installation of the braces

When fastening by the cutting method on the lower strapping bar marking is applied, which makes it possible to cut grooves with a depth of about 30% of the height of the timber itself.

All vertical posts, regardless of the method of fastening, are fixed with temporary braces.Thanks to this fastening, the racks will retain their strength, and the mounts will not loosen.

  1. Installation of the upper harness

In the corners of the building, the timber of the upper harness is fastened using the cut-in method. The connection of the vertical posts with the upper strapping is done in a manner similar to that used for their fastening with the lower strapping. It is worth following the strict vertical arrangement of the racks.

If the cutting method is used, you should follow the clear markings.

Technology of frame houses from boards and timber + Video
Installation of the upper trim of the frame house
  1. Mandatory reinforcement of the frame

At the next stage, the assembly of the frame house includes the installation of the miter box c. Their function is to give the frame of the house proper strength and resistance to vibration loads.

Technology of frame houses from boards and timber + Video
Frame bevels for structural strength

Prior to installation and fixing of bevels the next final check of the contour lines and verticals of the frame using a level.

It is optimal to secure each drain with four slopes.

If temporary cuttings were carried out, they are dismantled.

This completes the assembly of the frame of the house. You can continue to install the frame house and roof.

( 1 grade, average 5 of 5 )

.

selection, preparation, how to weld + Video
selection, preparation, how to weld + Video

Posted By: Work Style |10, Nov 2020

Outdoor brick primer and application features
Outdoor brick primer and application features

Posted By: Work Style |06, Nov 2020

Basement siding - panel sizes
Basement siding - panel sizes

Posted By: Work Style |06, Nov 2020