The material of the future is wood panels for walls: their advantages and disadvantages

The material of the future is wood panels for walls: their advantages and disadvantages Wooden panels for walls still remain popular, without losing their positions among finishing materials. This is understandable, because natural materials are able to give the room comfort and warmth.

The advantage of wood is that it organically fits into any design, be it classic or modern, Provence or Scandinavian. The ideal solution for an apartment or a loft-style house, minimalism will be wood wall decoration.

In this article, we will talk about wood panels for interior wall decoration, their advantages and disadvantages.

You will find out what types of this facing material are on the market, namely: 3D, MDF, chipboard, cork and glued wood, decorative white, colored, textured, veneered, varnished, laminated, decor in the form of rhinestones, stones, glasses and mirrors inserts.

Wall cladding

Options

For internal cladding of the walls of a house with wooden panels, often only one wall is used, so that select it, define a certain zone in the room.

  • On both sides of the door.
  • Around the window.
  • As dressing room walls.

  • Highlighting the wall behind the bed, TV, sofa, near the bar counter, kitchen island.
  • For slopes on walls, on poles, in niches.
  • In the bathrooms.
  • On the loggia and balcony.

Wall cladding with wood panels

Note.

Wall cladding with wooden panels is done both horizontally and vertically, depending on the idea. Such material is able to create an impression of comfort and warmth in the room. If you opted for the Provence style, place the panels on the lower level, for example, up to the windowsill, sink. Stop the choice of shades on white, light blue, gray, pink. Artificially aged wood looks wonderful.

Scandinavian style

The material of the future is wood panels for walls: their advantages and disadvantages Provides a certain coldness and airiness in the interior, which achieved by using white. Often, panels made of a single piece of natural wood are attached to the walls. The thickness of the boards is 1 - 2 cm, the length is 2.5 - 2.7 m, and the width is 9 - 10 cm.

The most demanded wood was and is pine, you can also buy boards made of oak, ash, spruce. Grooves are made on the edges of the panels, which allow the material to be tightly joined and reproduce the texture and pattern of natural wood.

The surface is smooth and profiled, the choice depends on your imagination. Scandinavian style loves shades of mint, pistachio, blue and white, paint in shades of white, mint, pistachio or blue. It looks very fashionable and modern.

Light colors help to create the illusion of three-dimensional wood panels.

Installation of wooden panels to the wall

Implemented on a special frame, which is purchased together with the boards. You can get recommendations on the placement of slats in the store, usually it is from 40 to 60 cm.

It is known that wood is quite a whimsical material that is not friendly with excessive moisture and can deform. There was a period when this type of finishing materials was forgotten, but now, the tree is triumphantly returning to the market, taking its strong position, thanks to a wide range of protection means.

These are oils, paints and varnishes, and impregnations, and wax. The choice is always yours, and it depends on the desire to give the wood the desired shade or to preserve its original appearance. In addition, these substances allow us to make pine, which is usual for us, an exotic material, a symbol of luxury - mahogany or teak.

Interior design projects in the loft style wood

The material of the future is wood panels for walls: their advantages and disadvantages Provide for the use of wooden decorative wall panels in all their natural beauty. In this case, paint is not used, but preference is given to varnishes, oils and various impregnations.

Wooden MDF panels for walls

Natural wood, of course, cannot be cheap, so for those who cannot afford it, or who have something other reasons, manufacturers produce MDF panels. By their composition, these are slabs of different materials, covered with veneer on top, imitating natural wood.

Medium density veneered panel that facilitates material assembly. Its thickness is 7 - 12 mm, width 12.5 - 32 cm, length 90 cm - 2.

5 m. Such a size range allows you to choose a board for any room, and individual areas in them. MDF board is covered with paints with good hiding power, laminate, film, imitating the texture of pine, cherry, oak, etc.

Note.

Wooden MDF wall panels harmoniously fit into any interior, modern or classic.

The material allows you to transform your home without extra cost and hassle. Also, it should be noted that the panels are separated using strips of aluminum, therefore, it will not work to create a continuous uniform coating.

The disadvantage of the veneered panel is the impossibility of installation in rooms with humidity above 70%, as well as allow the influence of high temperatures (fireplace).

Natural veneered panels are made from: beech, birch, alder, ash, oak, pine, ebony or mahogany.

Modified veneer is characterized by a rich texture and clear pattern, which is created by gluing the veneer in layers and cutting into thin strips crossing the gluing.

Veneer made of ebony, wenge, Finnish birch, zebrawood, oak and teak looks very attractive and expensive.

Methods of fixing decorative panels on walls in the interior

Horizontal method. This method allows you to install insulation in the walls, if necessary. Also, it makes it possible to expand and stretch visually the space. The method is suitable for highlighting the headboard by the bed, the wall behind the sofa or the work area.

Vertical method. This method gives the room additional severity and presentation. Therefore, it will organically fit into the study. Also, panels can be used to sheathe not only walls, but also the ceiling to create a uniform texture and style. Plates are fastened in several layers, it is possible at different levels, which will create the impression of volume and relief.

Types of wooden panels for walls

  • MDF panels have good indicators of MDF panels for sound and heat insulation, not exposed to mechanical stress, temperature fluctuations.
  • The material of the future is wood panels for walls: their advantages and disadvantages Glued wood for wall decoration in a room looks little different from natural wood. It has only a less expressive texture and is much cheaper in price.
  • Cork panels are in the segment of high price materials. They are environmentally friendly, hypoallergenic, antistatic.

    The cork is impregnated with special protective solutions against mold and mildew. Can be used to decorate walls with wood paneling in the bathroom. The material allows air to pass well, thereby creating a favorable climate in the house.

  • Chipboard panels are cheap and easy to install. But at the same time, it cannot boast of practicality, since it does not like high humidity, it has a loose and flimsy structure, which leads to deformation of the material.

  • Rack panels are available in sizes up to 3 m, which facilitates installation without gaps. Suitable for lining ceilings. It looks like an ordinary lining.

Types of wood panels for walls, depending on the surface treatment method

  • laminated (MDF panels);
  • veneered;
  • varnished (natural wood);
  • with leatherette;
  • embossed and with a pattern;
  • panels with decor (rhinestones, stones).

Fastening wooden panels to the wall

The panels are fastened to a perfectly flat surface using nails, a construction stapler or a clamp.

Otherwise, installation is carried out on a batten from rails. This method of fastening makes it possible to stretch beyond the communication panels (for example, an electric cable).

  • The tongue-and-groove method requires the slabs to snap into each other to create a flawlessly flat surface.
  • The groove-groove method connects the boards with a special jointing, which also has a decorative function.
  • At the final stage of the installation of wooden panels, corners, plinths, platbands, L-shaped profiles, edging are used.

Maintenance of decorative panels for interior wall decoration is quite simple. Wipe them with a damp sponge or soft cloth using special solutions (for heavy dirt) or plain water.

Important !

Do not use aggressive agents with acids, abrasive particles, solvents to wash wooden panels. They deform the material and can ruin the surface.

Wooden decorative panels for walls are a versatile material, which is why they are so popular among buyers.

With them it is very easy to translate any design ideas into reality, to give the room an interesting look and presentability. Difficulties in choosing can arise only from the great variety of the presented models, their texture and color palette.

Characteristics of wood panels for walls

  • coating strength;
  • elasticity;
  • moisture resistance;
  • reliability ;
  • thermal insulation ;
  • withstand temperature fluctuations.

3D wood panels for walls are planks with the same size and three-dimensional character pattern. They are often produced in the form of squares and rectangles.

They are mounted in such a way that the joints are not visible, and the overall canvas impresses with its grandeur and volume. They differ in their high cost, therefore, to reduce the cost of panels, they use different materials for the front (oak, ash, etc.) and the wrong side (plywood or MDF).

Panels are equipped with special fasteners that allow tightly connecting the material without gaps. 3D panels have a long service life, environmentally friendly, varied in texture, size and color.

Types of 3D wooden panels for walls

Panel boards. On the strips of such panels, the fastening elements are pre-fixed with a plywood base at a certain distance along the border, which serves as a joint seam in cases where there is no fastening with a designated gap.

Fragmented. Panels of this type are assembled directly on the wall. The texture is set precisely during the installation process and has no external differences from panel models.

Mosaic panels have a mesh base and are formed from a large number of small pieces of wood. Therefore, they got their name, since the result resembles a ceramic mosaic.

Flat or end. For the production of flat panels, round timber or timber is used, which is cut into elements. Thus, at the output we have densely protruding elements resembling a pixel image.

End panels are made from long pieces of wood. Often used to decorate wide walls.

Advantages of 3D panels for walls made of wood

Aesthetic appearance

Wall decor with wooden panels will decorate any home or an apartment, will add solidity and aesthetics. Inserts of glass, mirrors, decoration with carvings with gold are allowed.

High environmental friendliness

Wood does not harm the environment and humans, without causing allergies.

Therefore, the material can be used for wall decoration with decorative panels in the children's room and bedroom.

.